Product ID:ALLOYS OF THE 1XXX SERIES
MSDS Date:01/18/1994
FSC:3439
NIIN:00F048887
MSDS Number: BZVBC

EASTALCO ALUMINUM COMPANY

5601 MANOR WOODS ROAD
FREDERICK, MD 21701-7999
US

Emergency Phone: 301-662-6100

Info Phone: 301-662-6100

Cage: GO577

EASTALCO ALUMINUM COMPANY

FREDERICK, MD 21701-7999 US

Telephone: 301-662-6100

Cage: GO577

ALUMINUM *96-2*

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: <92%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

MANGANESE *96-2*

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1.5%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM (DUST)

MAGNESIUM

CAS: 7439-95-4

RTECS: OM2100000

Fraction By Weight: 5%

CHROMIUM METAL, CHROMIUM, CHROME (KNOWN CARCINOGEN BY NTP;

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 0.5%

ACGIH TLV: 0.5 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

COPPER (DUST & MIST), BRONZE POWDER *96-2*

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 5%

OSHA PEL 0.1 MG(CU)/M3 (FUME)

ACGIH TLV: 0.2 MG/M3 (FUME)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 8%

ACGIH TLV: 10 MG/CUM

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:DUST CAN BE IRRITATING TO THE EYES &
RESPIRATORY SYSTEM. SKIN: IRRITATION/THERMAL BURNS.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, BURNS.

First Aid:EYES: FLUSH IMMEDIATELY W/LARGE AMOUNTS OF WATER. INHALATION:
REMOVE TO FRESH AIR. GIVE CPR IF NEEDED. OBTAIN MEDICAL ATTENTION
IN ALL CASES.

Extinguishing Media:USE DRY CHEMICALS/SAND.
Fire Fighting Procedures:DON'T USE WATER/HALOGENATED EXTINGUISHING
AGENTS.
Unusual Fire/Explosion Hazard:POWDERED ALUMINUM CAN BE A SEVERE
FIRE/EXPLOSION HAZARD WHEN EXPOSED TO HEAT, FLAME, SOME
OXIDIZERS/IF PRESENT IN A DUST CLOUD.

Spill Release Procedures:DUST SHOULD BE SWEPT UP. KEEP WET FINES
SEPARATE FROM DRY CHEMICAL.

Handling and Storage Precautions:SPECIAL FACILITIES ARE REQUIRED FOR
HANDLING ALUMINUM POWDER.
Other Precautions:AVOID REPACKING WET MATERIAL IN SEALED CONTAINERS.

Respiratory Protection:IF DUST IS GENERATED, USE NIOSH-APPROVED
RESPIRATOR AS NEEDED.
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES
Supplemental Safety and Health
THIS MSDS INFORMATION IS FOR ALLUMINUM ALLOYS.

Melt/Freeze Pt:M.P/F.P Text:1060-1220F
Spec Gravity:2.7
Appearance and Odor:CAST INGOTS OF A SILVERY METAL

Stability Indicator/Materials to Avoid:YES
WATER, ALUMINUM, HYDROGEN CHLORIDE, SULFURIC ACID, ALKALIES, HALOGENS,
OXIDIZING AGENTS, HALOGENATED HYDROCARBONS.
Stability Condition to Avoid:HEAT, FLAME, MOISTURE.
Hazardous Decomposition Products:ACID/ALKALI, ALUMINUM OXIDE & NITRIDE
FORM ON HIGH TEMP REACTION W/AIR.

Waste Disposal Methods:COLLECT SCRAP FOR REMELTING. DISPOSE OF
IAW/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.