BZVQB - ETHYLENE
- MSDS: BZVQB
- Manufacturer: SCOTT SPECIALTY GASES INC
- Product Name: ETHYLENE
- National Stock Number: 6830-00F049269
Product Identification
Product ID:ETHYLENE
MSDS Date:07/26/1990
FSC:6830
NIIN:00F049269
MSDS Number: BZVQB
Responsible Party
PLUMSTEADVILLE, PA 18949-0310
US
Emergency Phone: 215-766-8861
Info Phone: 215-766-8861
Cage: 51847
Contractor
Telephone: 215-766-0416
Cage: 51847
Ingredients
ETHYLENE
CAS: 74-85-1
RTECS: KU5340000
Fraction By Weight: 100%
ACGIH TLV: C 3.3 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ASPHYXIATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:FREEZE BURNS, MODERATE ANESTHESIA, DIMINISHED
MENTAL ALERTNESS, LOSS OF CONSCIOUSNESS & CNS DEPRESSION.
First Aid
First Aid:INHALATION: IMMEDIATELY REMOVE VICTIM TO FRESH AIR. IF
BREATHING HAS STOPPED, GIVE CPR. IF BREATHING IS DIFFICULT, GIVE
OXYGEN. SKIN: FLUSH EFFECTED AREA W/TEPID WATER.
Fire Fighting
Flash Point Method:CC
Flash Point:213F
Lower Limits:2.7
Upper Limits:36
Extinguishing Media:CO2, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR SCBA & FULL PROTECIVE CLOTHING. STOP FLOW
OF GLASS.
(SEE SUPP)
Unusual Fire/Explosion Hazard:MODERATE WHEN EXPOSED TO FLAME & HEAT.
Accidental Release
Spill Release Procedures:EVACUATE & VENTILATE AREA. REMOVE SOURCE OF
HEAT/IGNITION. REMOVE LEAKING CONTAINERS TO OUTDOORS/INTO A HOOD.
CAN BE DISSOLVED IN COLD ORGANIC SOLVENT & SUBSEQUENTLY RECOVERED
BY WARMING IT.
Handling
Handling and Storage Precautions:STORE IN WELL VENTILATED AREAS ONLY.
KEEP VALVE PROTECTION CAP ON CYLINDERS WHEN NOT IN USE & SECURE
CYLINDER WHEN USING TO PROTECT FROM FALLING.
Other Precautions:USE SUITABLE HAND TRUCK TO REMOVE CYLINDERS.
Exposure Controls
Respiratory Protection:USE SCBA IN CASE OF EMERGENCY.
Ventilation:PROVIDE ADEQUATE GENERAL & LOCAL EXHAUST VENTILATION.
EXPLOSION PROOF.
Protective Gloves:INSULATED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SAFETY SHOES
Supplemental Safety and Health
MATERIALS TO AVOID CONT'D: BROMOTRICHLOROMETHANE & NITROMETHANE +
ALUMINUM CHLORIDE. SPEC FIRE CONT'D: DON'T FULLY EXTINGUISH BURNING
GAS UNTIL FLOW HAS BEEN STOPPED. USE WATER SPRAY TO COOL EXPOSED C
YLINDERS.
Chemical Properties
Boiling Pt:B.P. Text:-155F
Vapor Pres:35.04
Vapor Density:0.98
Spec Gravity:0.568
Solubility in Water:0.226
Appearance and Odor:COLORLESS W/SWEET ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ALUMINUM CHLORIDE, OZONE, CARBON TETRACHLORIDE,
BENZOYL PEROXIDE. (SEE SUPP)
Hazardous Decomposition Products:CO, CO2.
Disposal
Waste Disposal Methods:ALLOW GAS TO DISCHARGE AT MODERATE RATE. RETURN
DEFECTIVE CYLINDERS TO SUPPLIER. IT CAN BE ABSORBED IN 95% SULFURIC
ACID/RESULTING MIXTURE CAN BE TAKEN TO PLANT DISPOSAL. DISPOSE OF
IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.