Product ID:FG BOTTOMKOTE BLACK, 779
MSDS Date:11/07/1992
FSC:8010
NIIN:00N020169
MSDS Number: CBBFH

INTERNATIONAL PAINT CO INC

2270 MORRIS AVE
UNION, NJ 07083-0386
US

Emergency Phone: 201-686-1300

Info Phone: 201-686-1300

Cage: 26351

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

10 @ 20C

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 1-5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

7 @ 20C

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 1-5%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC-; (MINERAL

CAS: 64742-88-7

Fraction By Weight: 10-15%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)

COPPER (I) OXIDE; (CUPROUS OXIDE)

CAS: 1317-39-1

RTECS: GL8050000

Fraction By Weight: 45-50%

OSHA PEL 1 MG/M3 (MFR)

ACGIH TLV: 1 MG/M3 (MFR)

ZINC OXIDE (SARA 313) (CERCLA)

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: IRRITATION, REDNESS,
TEARING AND BLURRED VISION. SKIN: IRRITATING. MAY RESULT IN
DERMATITIS. HARMFUL IF ABSORBED THROUGH THE SKIN. INHALATION:
SEVERE IRRITATION, DIZZINESS, POSSIBLE NAUSE A AND VOMITING AND
UNCONSCIOUSNESS. INGESTION: GASTROINTESTINAL IRRITATION, NAUSEA,
VOMITING, DIARRHEA (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: AND UNCONSCIOUSNESS. CHRONIC: CHRONIC
OVEREXPOSURE TO, AND MISUSE OF, SOLVENTS HAS BEEN LINKED TO
PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE. INHALATION OF ZINC FUME
MAY PRODUCE SYMPTOMS KNOW N AS METAL FEVER. SYMPTOMS USUALLY
DISAPPEAR WITHIN 24 HOURS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid:EYES: FLUSH IMMED W/COPIOUS QTYS OF WATER FOR AT LEAST 15
MIN. GET MED ATTN IMMED. SKIN: REMOVE CONTAM CLTHG. WASH SKIN
W/PLENTY OF SOAP & WATER. LAUNDER CLOTHES BEFORE REUSE. INHAL:
REMOVE TO FRESH A IR. GIVE ARTF RESP IF NEEDED. GET MED ATTN.
INGEST: GET MED ATTN IMMED. DRINK PROMPTLY MILK, EGG WHITES,
GELATIN SOLUTION OR WATER. AVOID ALCOHOL.

Flash Point Method:SCC
Flash Point:81.0F,27.2C
Lower Limits:1.0%
Extinguishing Media:USE FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SMOTHER FLAMES W/ONE OF THE ABOVE EXTING MEDIA. WATER MAY BE USED
TO COOL UNOPENED CONTRS, BUT (SUP DAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN BLDG DESIGNED & PROT FOR STOR
OF LIQS W/NFPA CLASS IC. AVOID BRTHG DUST/CHIPS FROM
SANDING/BLASTING SURF COATED W/THIS PROD.
Other Precautions:THIS MATERIAL IS TOXIC TO FISH IF MISUSED, READ
CONTAINER LABEL BEFORE USE.

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF
OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED VENT AREA, USE
NIOSH/MSHA APPRVD R ESP I/A/W 29 CFR 1910.134 TO (SUP DAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGS < LIM SPECIFIED, & TO REMOVE DECOMP (SUP DAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH & DELUGE
SHOWER . WEAR APPROP IMPERVIOUS PROT CLOTHING TO PREVENT SKIN
CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: MUST NOT BE USED AS EXTING MEDIA. TAKE CARE TO PVNT
SPREAD OF BURNING LIQ W/WATER. CLSD CONTRS MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT. RESP PROT: REMOVE COMBINATION OF PARTICULATE &
VAPS. VENT: PRODS DURING WELDING/FLAMECUTTING ON SURF COATED W/THIS
PROD.

Boiling Pt:B.P. Text:>280F,>138C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.776
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER

Stability Indicator/Materials to Avoid:YES
MOISTURE. OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP DRY. STORE AWAY FROM DIRECT HEAT,
FLAME OR SPARK.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBON FRAGMENTS, ZINC FUMES, COPPER FUMES.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.