CBCKY - AQUATAPOXY COATING SYSTEM A-6, PART B, 35-137

  • MSDS: CBCKY
  • Manufacturer: AMERICAN CHEMICAL CORP
  • Product Name: AQUATAPOXY COATING SYSTEM A-6, PART B, 35-137
  • National Stock Number: 8030-00N064016
Product Identification

Product ID:AQUATAPOXY COATING SYSTEM A-6, PART B, 35-137
MSDS Date:01/18/1993
FSC:8030
NIIN:00N064016
Kit Part:Y
MSDS Number: CBCKY

Responsible Party
AMERICAN CHEMICAL CORP
5231 NORTHRUP AVE
ST LOUIS, MO 63110
US

Emergency Phone: 800-633-0247

Info Phone: 314-664-5749

Cage: OBTX0

Contractor
KING ADHESIVES CORP
ST LOUIS, MO 63110 US

Telephone: 314-772-9953/800-233-8171

Cage: 0SS34

Ingredients

SILICA GEL; (SILICA)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 62-67%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3


CYCLOALIPHATIC AMINE

OSHA PEL N/K

ACGIH TLV: N/K


PHENOL, 2,4,6-TRIS(DIMETHYLAMINOMETHYL)-; (ALIPHATIC

CAS: 90-72-2

RTECS: SN3500000

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: CAUSES IRRIT & MAY CAUSE
BURNS. SKIN: PVNT ALL SKIN CONT. MAY CAUSE INJURY TO SKIN FOLLOWING
PRLNG/RPTD CONT. PHENOL DERIVATIVE COMPONENT OF THIS CMPD IS A SPI
CLASS 5 IRRIT. RPTD EXPOS M AY CAUSE SENSIT. INHAL: EXCESS INHAL
LIKELY TO CAUSE IRRIT OF MUC MEMB. PROD CAN BE ALKALINE, CORR, &
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: IRRIT TO SKIN, EARS, EYES, & MUC
MEMBRANES. MAY CAUSE INJURY UPON PROLONGED AND REPEATED CONTACT.
INGEST: PHYSICAL PROPERTIES SUGGEST THAT THIS ROUTE OF EXPOSURE TO
BE EXTREMELY UNLIKELY. OR AL TOXICITY NOT AVAILABLE ON COMPOUND.
SEEK IMMEDIATE MEDICAL ATTENTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15
MINUTES. CONSULT MD. SKIN: WASH IMMEDIATELY WITH SOAP AND WATER. IF
IRRITATION OR SENSITIZATION OCCURS, REMOVE PERSON FROM FURTHER
CONTACT WI TH MATERIAL. INHALATION: REMOVE TO FRESH AIR IF EFFECTS
OCCUR. CONSULT MD. INGESTION: SEEK IMMEDIATE MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER MAY BE HELPFUL IN KEEPING ADJACENT CONTRS COOL. AVOID
SPREADING BURNING LIQ W/WATER USED (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL
SURFACES AND OTHER SOURCES OF IGNITION.

Accidental Release

Spill Release Procedures:KEEP SOURCES OF IGNITION AND HOT METAL
SURFACES ISOLATED FROM THE SPILL. MATERIAL MAY FLOW SLOWLY. SCRAPE
INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. AVOID PROLONGED OR REPEATED CONTACT WITH SKIN. DO NOT HANDLE
OR STORE NEAR FLAME, HEAT OR STRONG OXIDANTS.
Other Precautions:DO NOT STORE IN DIRECT SUNLIGHT. AVOID PROLONGED
STORAGE ABOVE 38C (100F).

Exposure Controls

Respiratory Protection:TO AVOID OVEREXPOSURE, WEAR A NIOSH/MSHA
APPROVED AIR-PURIFYING RESPIRATOR.
Ventilation:GENERAL MECHANICAL VENT IS SUFFICIENT FOR MOST CONDITIONS.
LOCAL EXHAUST VENT MAY BE NECESSARY FOR SOME OPERATIONS.
Protective Gloves:NEOPRENE OR OTHER CHEM RESIST GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS (SUP DAT)
Other Protective Equipment:WEAR CLEAN, LONG-SLEEVED, BODY-COVERING
CLTHG. EMERGENCY EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: FOR COOLING PURPOSES. EYE PROT: GOGGLES AND FULL
LENGTH FACESHIELD .

Chemical Properties

Boiling Pt:B.P. Text:>200F,>93C
Spec Gravity:1.60
Solubility in Water:NEGLIGIBLE
Appearance and Odor:HEAVY PAINT TO MASTIC CONSISTENCY, WITH BLAND ODOR
Percent Volatiles by Volume:<1

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES, SELECTED AMINES, OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CARBON MONOXIDE AND CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.