CBCWT - PANASONIC KX-P4420

Product Identification

Product ID:PANASONIC KX-P4420
MSDS Date:06/15/1993
FSC:6850
NIIN:00N065382
MSDS Number: CBCWT

Responsible Party
ASPEN IMAGING INTERNATIONAL INC
555 ASPEN RIDGE DR
LAFAYETTE, CO 80026-9300
US

Emergency Phone: 303-666-5750; 800-955-5555

Info Phone: 303-666-5750; 800-955-5555

Cage: 65521

Contractor
ASPEN IMAGING INTL INC
LAFAYETTE, CO 80027-5000 US

Telephone: 800-955-5555

Cage: 65521

Ingredients

STYRENE ACRYLATE COPOLYMER RESIN;(STYRENE/ACRYLIC COPOLYMER

CAS: 25153-46-2

OSHA PEL N/K

ACGIH TLV: N/K


IRON OXIDE

CAS: 1317-61-9

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3


IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5MG(FE)/M3FUME,B2


PROPENE POLYMERS; (POLYOLEFIN)

CAS: 9003-07-0

RTECS: TR5000000

OSHA PEL N/K

ACGIH TLV: N/K


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


DYE; (METAL COMPLEX DYE)

CAS: 31714-55-3

OSHA PEL N/K

ACGIH TLV: N/K


SILICON DIOXIDE, AMORPHOUS; (AMORPHOUS SILICA)

CAS: 7631-86-9

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EXPOS UNDER NON-DUSTY CNDTNS
SHOULD NOT CAUSE ANY SIGNIFICANT HEALTH EFFECT. UNDER DUSTY CNDTNS,
IRRIT MAY OCCUR W/SOME ACCUM OF TONER DUST IN NOSE & THROAT. EYE:
TONER DUST MAY CAUSE CONJUNCTI VAL IRRIT BUT NO CHEMICAL IRRIT/DMG
TO EYE/PARTS. INGEST: ACCIDENTAL INGEST OF TONER MAY CAUSE NAUSEA.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CHRONIC: RPTD EXPOSURE UNDER
NON-DUSTY CNDTNS SHOULD NOT CAUSE A SIGNIFICANT HLTH HAZARD.
REPEATED INHAL OF HIGH CONCS OF TONER HAS CAUSED LUNG EFTS & DMG IN
LAB ANIMALS. BASED ON THESE STUD IES, EXCESSIVELY DUSTY CONDITIONS
SHOULD BE AVOIDED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: IMMED FLUSH W/LGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES, OCCAS LIFTING UPPER & LOWER EYELIDS. IF IRRIT DEVELOPS,
SEEK MD ATTN. SKIN: WASH W/SOAP & WATER TO REMOVE. INHAL: REMOVE TO
FRESH AIR. SUPPORT BREATHING(GIVE O*2/ARTF RESP). INGEST: CALL MD
IMMEDIATELY.

Fire Fighting

Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT. AVOID INHALATION OF SMOKE. COOL FIRE EXPOSED
CONTAINER WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:AS W/ALL COMBUSTIBLE MATLS IN FINELY
DIVIDED STATE, EXTREMELY HIGH CONCENTRATIONS IN AIR MAY CREATE AN
EXPLOSIVE MIXTURE. ELIMINATE SOURCES OF IGNITION.

Accidental Release

Spill Release Procedures:LOOSE TONER MAY BE VACUUMED OR SWEPT. RESIDUE
MAY BE REMOVED WITH SOAP & WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID RPTD/PRLNGD INHAL OF EXCESS
DUST. DO NOT TAKE INTERNALLY. AVOID CONTACT W/SKIN, EYES, AND
CLOTHING. STORE IN COOL, DRY, WELL-VENT AREA.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:FOR USE OTHER THAN NORMAL OFFICE PRINTER,
OPERATING PROCEDURES (SUCH AS IN BULK TONER PROCESSING FACILITY)
NIOSH/MSHA APPROVED RESPIRATORS MAY BE REQUIRED IF UNDER DUSTY
CONDITIONS.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Spec Gravity:1.3-1.5
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER W/FAINT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:ABNORM HIGH AIRBORNE CONCS OF DUST CAN
PRESENT THE POSSIBILITY OF AN EXPLOSION IF AN IGNITION SOURCE IS
PRESENT.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.

Disposal

Waste Disposal Methods:REMOVE TO AN APPROVED LANDFILL SITE AND DISPOSE
OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS. DO NOT
INCINERATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.