Product ID:SPEEDHIDE LATEX FIRE RETARDANT, 42-7
MSDS Date:06/05/1990
FSC:8010
NIIN:00N066694
MSDS Number: CBDWB

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 35-40%

OSHA PEL N/K

ACGIH TLV: N/K

FILM,FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 55-60%

OSHA PEL N/K

ACGIH TLV: N/K

TITANIUM DIOXIDE DUSTS FROM COATINGS IS

RTECS: 9999999ZZ

SIGNIFICANT HAZARD FOR MAN.

RTECS: 9999999ZZ

PERSISTENT SKIN/EYE IRRITATION OR BREATHING

RTECS: 9999999ZZ

IN FIRE AND EXPLOSION HAZ SECTION BELOW STATED LIM, &

RTECS: 9999999ZZ

ON SURFACES COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION:HARMFUL IF SWALLOWED.
EYE:CAUSES IRRIT. SYMPS:REDNESS, ITCHING, BURNING SENSATION &
VISUAL DISTURBS MAY INDICATE EXCESSIVE CONT. SKIN:MAY CAUSE MOD
IRRIT. SYMPS:DRYNESS, ITCHING, CRACKING, B URNING, REDNESS & SWELL
ARE CNDTNS ASSOC W/EXCESSIVE CONT. MAY BE ABSORBED THRU SKIN.
INHAL:VAPOR AND (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:SPRAY MIST MAY BE HARMFUL.
CHRONIC:AVOID LONG TERM & RPTD CONT. PROD CNTNS TITANIUM DIOXIDE.
ANIMALS INHAL MASSIVE QTYS OF TITANIUM DIOXIDE DUST IN LONG-TERM
STUDY DEVELOPED LUNG TUMORS. STU DIES W/HUMANS INVOLVING MFR OF
PIGMENT INDICATE NO INCREASED RISK OF CANCER FROM EXPOS. POTNTL FOR
INHAL OF (ING 4)

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR @ LST 15 MIN. SKIN:FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY
WASHING W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP
& OTHE R SUPPORTIVE MEASURES AS REQ. OTHER:IF ANY OF FOLLOWING
OCCUR DURING/FOLLOWING USE OF PROD CONT POIS CTL CTR, EMER ROOM/MD
IMMED. HAVE MSDS INFO AVAIL. INGEST EXCESSIVE EXPOS TO CORR MATL.
(ING 6)

Flash Point Method:PMCC
Extinguishing Media:USE NATL FIRE PROT ASSOC (NFPA) CLASS B EXTINGS
(CARBON DIOXIDE, DRY CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM)(SUP
DAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & (SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO THE BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME
HEAT.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSOR B MATL & PLACE INTO CNTNRS FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QTYS IN BLDGS DESIGNED & PROT FOR STOR OF NFPA CLASS IIIB COMBUST
LIQ. PROT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
COATING SYSTEM, READ THE MSDS(S) FOR THE OTHER COMPONENT OR
COMPONENTS BEFORE BLENDING AS THE RESULTING MIXTURE MAY HAVE THE
HAZARDS OF ALL OF ITS PART S.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A
NIOSH/MSHA APPROVED SUITABLE RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMS, LEL (ING 7)
Protective Gloves:NITRILE, NEOPRENE OR LATEX GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR PROT CLTHG, INCLUDING IMPERMEABLE APRON CONSTRUCTED OF:(SUPP
DATA)
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA:DESIGNED TO EXTING NFPA CLASS IIIB COMBUST LIQ FIRES. FIRE
FIGHT PROC:POSS AUTO IGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF
WATER IS USED, FOG NOZZS ARE PREF. HAZ DECOMP PRODS:INCLUDING:
CARBON MONOXIDE, HYDROGEN CHLORIDE, CHLORINATED PRODS, CHLORINE.
OTHER PROT EQUIP:NITRILE, NEOPRENE OR LATEX.

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17.3
Vapor Density:HVR/AIR
Spec Gravity:1.30
Evaporation Rate & Reference:34 (BUOAC=100)
Solubility in Water:38.4%
Appearance and Odor:VISCOUS LIQ W/AN ODOR CHARACTERISTIC OF CHEM FAMILY
& ANY SOLV LISTED IN INGS.
Percent Volatiles by Volume:74.90

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID CONTACT WITH STRONG ALKALIES, STRONG
MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAKE-CUTTING ON SURFS COATED W/PROD MAY
PRDCE FUMES (ING 6)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEMEN T FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.