Product ID:RG-60
MSDS Date:07/12/1990
FSC:3439
NIIN:00N068579
MSDS Number: CBHZX

NASCO INC

4749 OLD WWY 8
ST PAUL, MN 55112
US

Emergency Phone: 612-780-2000

Info Phone: 612-780-2000

Cage: NASCX

NASCO INC

ST PAUL, MN 55112 US

Telephone: 612-780-2000

Cage: NASCX

CARBON BLACK; (CARBON)

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <0.50%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9495

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: <2.50%

OSHA PEL C 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9495

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: <0.50%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9495

COPPER (SARA 313) (CERCLA)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: <0.50%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2 MG/M3 FUME; 9495

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: <0.75%

OSHA PEL 10 PPM.

ACGIH TLV: 10 PPM.

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: BAL

OSHA PEL 5 MG/M3 FE203 (MFR)

ACGIH TLV: N/K

REACTION/OXIDATION OF MATLS SHOWN IN INGRED SECTION,

RTECS: 9999999ZZ

REASONABLY EXPECTED FUME CONSTITUENTS OF THIS PROD

RTECS: 9999999ZZ

OXIDES OF SILICON, MANGANESE, COPPER, & MOLYBDENUM.

RTECS: 9999999ZZ

AND CARBON DIOXIDE, OZONE AND NITROGEN OXIDES MAY

RTECS: 9999999ZZ

TO KEEP HEAD OUT OF FUMES.

RTECS: 9999999ZZ

LENS. PROVIDE PROTECTIVE SCREENS AND FLASH GOGGLES

RTECS: 9999999ZZ

SPARKS, AND ELECTRICAL SHOCK.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FUMES AND GREASE THROUGH INHALATION.
SHORT TERM-DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF NOSE, THROAT
OR EYES. LONG TERM-SIDEROSIS. ARC RAYS CAN INJURE EYES AND BURN
SKIN. HEAT RAYS-BURN EYES ELECT RIC SHOCK CAN KILL. NOISE CAN
DAMAGE HEARING.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SEE HEALTH HAZARDS.

First Aid:CALL FOR MED AID. EMPLOY FIRST AID TECHNIQUES REC BY AM. RED
CROSS. INHAL:IF BRTHG DIFF, GIVE OXYGEN, CALL MD. ELECTRIC
SHOCK-DISCONNECT EQUIP. NOT BRTHG-ARTF RESP, MOUTH-TO-MOUTH. NO
PULSE BEGIN HEAR T MASSAGE. CALL MD. ARC BURN-CALL MD. INGEST:CALL
MD IMMED. EYES:IMMED FLUSH W/POTABLE H*2O FOR A MIN OF 15 MIN, SEEK
ASSISTANCE FROM MD. SKIN:FLUSH W/COPIOUS AMTS OF H*2O. CALL MD.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
NON-FLAM. WELDING ARC & SPARKS CAN IGNITE COMBUST & FLAM PRODS. SEE
ANSIZ 49.1 "SAFETY IN WELDING &(SUPDAT)
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NOT APPLICABLE.
Other Precautions:NOT APPLICABLE.

Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN WELDING IN CONFINED SPACE OR EXPOSURE IS NOT BELOW
TLV. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:USE ENOUGH VENT, LOC EXHST AT THE ARC/BOTH TO KEEP FUMES &
GASES BELOW TLV'S IN WORKERS BRTHG ZONE. TRAIN WELDER(ING 11)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:HELMET/FACE SHIELD W/FILTER (ING 12)
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
WEAR HAND, HEAD, & BODY PROT TO PVNT INJURY FROM RADIATION, (ING
13)
Work Hygienic Practices:TRAIN WELDER NOT TO TOUCH LIVE ELECTRICAL PARTS
AND TO INSULATE HIMSELF FROM WORK AND GROUND.
Supplemental Safety and Health
FIRE FIGHT PROC:CUTTING" FOR FIRE PVNT & PROT INFO. HAZ DECOMP
PROD:BEING WELDED, PROCESS, PRODS, & ELECTRODES USED. WHEN
ELECTRODE IS CONSUMED, FUME & GAS DECOMP PRODS GENERATED ARE DIFF
IN-% & FORM FROM INGREDS LISTED IN INGRED SECTION. DECOMP PRODS OF
NORM OPERATION INCL THOSE ORIGINATING FROM VOLATILIZATION,(ING 7)

Appearance and Odor:COPPER COATED OR BARE SOLID STEEL WIRE OR RODS.

Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QUANTITY OF BOTH ARE DEPENDENT
UPON METAL (SUPDAT)

Waste Disposal Methods:DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE
CONTAINER OR LINER IN ANY ENVIRONMENTALLY ACCEPTABLE MANNER, IN
FULL COMPLIANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.