CBJZJ - ANOMAX ANODIZE HARDCOAT ADDITIVE

  • MSDS: CBJZJ
  • Manufacturer: NOVAMAX TECHNOLOGIES
  • Product Name: ANOMAX ANODIZE HARDCOAT ADDITIVE
  • National Stock Number: 6810-00N069174
Product Identification

Product ID:ANOMAX ANODIZE HARDCOAT ADDITIVE
MSDS Date:03/22/1991
FSC:6810
NIIN:00N069174
MSDS Number: CBJZJ

Responsible Party
NOVAMAX TECHNOLOGIES
1615 JOHNSON RFD NW
ATLANTA, GA 30318
US

Emergency Phone: 800-726-3737;800-424-9300(CHEMTREC)

Info Phone: 404-799-1292;313-464-4555

Preparer: VIRGIL ZIPPERER

Cage: NOVAM

Contractor
NOVAMAX TECHNOLOGIES INC
UNKNOW ATLANTA, GA 30318 US

Telephone: 404-799-1292

Cage: NOVAM

Ingredients

GLYCEROL; (GLYCERINE)

CAS: 56-81-5

RTECS: MA8050000

Fraction By Weight: <40%

OSHA PEL 15 MG/M3 (MIST)

ACGIH TLV: 10 MG/M3 (MIST)


LAKES, STREAMS/PONDS W/OUT APPROVAL.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: EXTREME IRRITATION
OF RESPIRATORY SYSTEM INCLUDING MUCOUS MEMBRANES. INGESTION: SMALL
AMOUNTS MAY CAUSE GASTRIC PAIN, DIARRHEA AND VOMITING INCLUDING
NAUSEA. SKIN: SMALL AMOUNTS MAY CAUSE SLIGHT TO MODERATE
IRRITATION WITH DISCOMFORT AND RASH. PROLONGED EXPOSURE MAY CAUSE
MILD (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CORROSION. EYES: MODERATE TO SEVERE
IRRITATION WITH DISCOMFORT AND TEARING INCLUDING BLURRING OF
VISION. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:UNKNOWN.

First Aid

First Aid:INGEST: ADMIN MILK/MILK OF MAGNESIA. IF THESE ARE NOT AVAIL,
GIVE LGE QTYS OF WATER. DO NOT INDUCE VOMIT. DO NOT ADMIN ALCOHOL.
DO NOT ADMIN FLUIDS TO UNCON PERS. GET MED ATTN IMMED. INHAL:
REMOVE TO FRESH AIR. IF BRTHG HAS STOPPED/IS IRREGULAR, ADMIN ARTF
RESP. IF BRTHG DFCLT, ADMIN OXYGEN. GET MED ATTN AS QUICK AS POSS.
EYE: IMMED FLUSH IN CLEAR RUNNING WATER FOR AT LEAST 15 MIN
LIFTING(SUP DAT)

Fire Fighting

Flash Point:NONE
Extinguishing Media:USE WATER FOG, ALCOHOL FOAM, CARBON DIOXIDE OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER SPRAY TO COOL NEARBY CONTAINERS
AND STRUCTURES WITH WATER.
Unusual Fire/Explosion Hazard:CONTACT WITH METALS MAY PRODUCE FLAMMABLE
HYDROGEN GAS.

Accidental Release

Spill Release Procedures:DO NOT ATTEMPT TO CLEAN ANY SPILL W/OUT PROT
CLTHG & EQUIP. LGE SPILL: NEUT W/SODIUM CARBONATE/SODIUM
BICARBONATE (BAKING SODA) & COLLECT FOR DISP USING VACUUM
TRUCK/PUMP. FLUSH AREA W/PLENTY OF WATER . SML SPILL: ABSORB ON
CLAY, VERMICULITE/(SUP DAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE AWAY FROM
OXIDIZING MATERIALS. WHEN NOT IN USE, KEEP CONTAINER TIGHTLY
CLOSED. STORE IN WELL-VENTILATED AREA.
Other Precautions:AVOID CONTACT WITH SKIN, EYES AND CLOTHING. KEEP FROM
FREEZING. STORE ABOVE 50F. KEEP THIS AND ALL CHEMICALS OUT OF REACH
OF CHILDREN.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR RECOMMENDED IF
PRODUCT IS MISTING.
Ventilation:LOCAL EXHAUST: SUFFICIENT TO KEEP BELOW PERMISSIBLE LIMITS.
Protective Gloves:RUBBER OR NEOPRENE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:WATERPROOF APRON/SUIT TO PVNT SKIN & CLTHG
CONT. EMER EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THORO AFTER HANDLING. WASH PRODUCT FROM
CLOTHES AND SKIN. USE GOOD HOUSEKEEPING PRACTICES.
Supplemental Safety and Health
PH: 1.7-2.1. HAZ DECOMP PROD: GAS. MAY ALSO PRDCE CARBON DIOXIDE &
CARBON MONOXIDE. FIRST AID PROC: UPPER & LOWER LIDS OCCAS. GET MED
ATTN IMMED. SKIN: FLUSH W/WATER. REMOVE CONTAM CLTHG. IF IRRIT/BUR
NS ARE PRESENT, GET MED ATTN. SPILL PROC: OTHER INERT ABSORB &
COLLECT FOR DISP.

Chemical Properties

Boiling Pt:B.P. Text:>225F,>107C
Melt/Freeze Pt:M.P/F.P Text:>32F,>0C
Spec Gravity:1.175 (H*2O=1)
pH:SUPDAT
Solubility in Water:COMPLETELY SOLUBLE
Appearance and Odor:CLEAR, PALE YELLOW PASTE TO TAN LIQUID, WITH A
SLIGHTLY SWEET ODOR

Stability

Stability Indicator/Materials to Avoid:YES
DO NOT MIX W/STRONG ALKALIES/STRONG OXIDIZING AGENTS. AVOID CONT
W/CYANIDES/SULFIDES. DO NOT MIX W/CHLORINATED PRODUCTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HEAT, OXIDES OF NITROGEN, HYDROGEN
CYANIDE/HYDROGEN SULFIDE GAS. MAY REACT W/METALS TO PRDCE EXPLO
HYDROGEN (SUP DAT)

Disposal

Waste Disposal Methods:PROD & SOLN MAY BE NEUT W/SODIUM
CARBONATE/SODIUM BICARBONATE (BAKING SODA). UNNEUT SOLN ARE ACIDIC,
MAY BE CONSIDERED CORR & SHOULD BE PROCESSED THRU FED, STATE & LOC
APPRVD HAZ WASTE FACILITY. AVOID FLUSHING PROD & SOLN INTO PUBLIC
SEWERS, (ING 2)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.