Product ID:MINOLTA SPX
MSDS Date:06/15/1993
FSC:6850
NIIN:00N070315
MSDS Number: CBLPB

ASPEN IMAGING INTERNATIONAL INC

555 ASPEN RIDGE DR
LAFAYETTE, CO 80026-9300
US

Emergency Phone: 303-666-5750

Info Phone: 800-955-5555

Cage: 65521

ASPEN IMAGING INTL INC

LAFAYETTE, CO 80027-5000 US

Telephone: 800-955-5555

Cage: 65521

STYRENE ACRYLATE COPOLYMER; (STYRENE/ACRYLIC COPOLYMER

CAS: 25153-46-2

OSHA PEL N/K

ACGIH TLV: N/K

IRON OXIDE

CAS: 1317-61-9

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

IRON (III) OXIDE; (IRON OXIDE)

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 FUME (FE)

PROPENE POLYMERS; (POLYOLEFIN)

CAS: 9003-07-4

RTECS: UD1842000

OSHA PEL N/K

ACGIH TLV: N/K

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

CHROMATE(1-), BIS [1-((5-CHLORO-2-HYDROXY-PHENYL)

CAS: 31714-55-3

OSHA PEL N/K

ACGIH TLV: N/K

SILICA GEL; (AMORPHOUS SILICA)

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

PRINTER, OPERATING PROCS (SUCH AS IN BULK TONER

RTECS: 9999999ZZ

REQUIRED IF UNDER DUSTY CONDITIONS.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:EXPOS UNDER NON-DUSTY
CNDTNS SHOULD NOT CAUSE ANY SIGNIFICANT HLTH EFT. UNDER DUSTY
CNDTNS, IRRIT MAY OCCUR W/SOME ACCUM OF TONER DUST IN NOSE &
THROAT. SKIN:THIS PROD SHOULD NOT BE A SIGN IFICANT HAZ FROM DERMAL
EXPOS. EYE:TONER DUST MAY CAUSE CONJ IRRIT BUT NO CHEM IRRIT/DMG TO
EYE/ITS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:PARTS. INGEST:ACCIDENTAL INGEST OF
TONER MAY CAUSE NAUS. THERE ARE NO KNOWN/REPORTED EFTS FROM RPTD
INGEST OF THIS PROD. CHRONIC:INHAL:RPTD EXPOS UNDER NON-DUSTY
CNDTNS SHOULD NOT CAUSE SIGNI FICANT HLTH HAZ. RPTD INHAL OF HIGH
CONCS OF TONER HAS CAUSED LUNG EFTS & DMG IN LAB ANIMALS. BASED ON
THESE (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
W/LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES, OCCASIONALLY
LIFTI NG UPPER & LOWER EYELIDS. IF IRRITATIONDEVELOPS, SEEK MEDICAL
ATTENTION. SKIN:WASH W/SOAP & WATER TO REMOVE.

Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . COOL FIRE EXPOSED CONTAINERS W/WATER SPRAY.
Unusual Fire/Explosion Hazard:AS W/ALL COMBUSTIBLE MATERIALS IN A
FINELY DIVIDED STATE, EXTREMELY HIGH CONCENTRATIONS IN AIR MAY
CREATE EXPLOSIVE MIXTURE. ELIMINATE SOURCES OF IGNITION.

Spill Release Procedures:LOOSE TONER MAY BE VACUUMED OR SWEPT. RESIDUE
MAY BE REMOVED W/SOAP & WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID REPEATED OR PROLONGED
INHALATIONS OF EXCESSIVE DUST. DO NOT TAKE INTERNALLY. AVOID
CONTACT W/SKIN, EYES & CLOTHING.
Other Precautions:STORE IN A COOL, DRY, WELL-VENTILATED AREA. DO NOT
INCINERATE.

Respiratory Protection:NONE REQUIRED WHEN USED AS INTENDED IN PRINTER
EQUIPMENT. FOR USE OTHER THAN NORMAL OFFICE PRINTER, OPERATING
PROCEDURES (SUCH AS IN BULK TONER PROCESSING FACILITY) NIOSH/MSHA
APPROVED RESPIRATORS MAY BE REQUIRED IF UNDER DUSTY CONDITIONS.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE REQD WHEN USED AS INTENDED (SUPDAT)
Eye Protection:NONE REQD WHEN USED AS INTENDED (SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP:STUDIES, EXCESSIVELY DUSTY CNDTNS SHOULD BE AVOIDED.
WASTE DISP METH:IT LISTED AS HAZ WASTE UNDER SUBPART D. AS NON-HAZ
SOLID WASTE IT SHOULD BE DISP OF I/A/W FED, STATE & LOC REGS BY
DISP IN SANIT LANDFILL. PROT GLOVES:IN PRINTER EQUIP. EYE PROT:IN
PRINTER EQUIP. FOR USE OTHER THAN NORMAL OFFICE(ING 8)

Spec Gravity:1.3-1.5
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER; FAINT ODOR.

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:ABNORMALLY HIGH AIRBORNE CONCS OF DUST CAN
PRESENT POSSIBILITY OF EXPLO IF IGNIT SOURCE IS PRESENT.
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE.

Waste Disposal Methods:REMOVE TO AN APPRVD LANDFILL SITE & DISP OF
I/A/W FED, STATE & LOC REGS. IF THIS PROD BECOMES A WASTE, IT DOES
NOT MEET CRITERIA OF HAZ WASTE AS DEFINED UNDER 40 CFR 261 IN THAT
IT DOES NOT EXHIBIT CH ARACTS OF HAZ WASTE OF SUBPART C, NOR IS
(SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.