Product ID:SODER-WICK FINE-BRAID, 80
MSDS Date:01/12/1995
FSC:3439
NIIN:00N070833
MSDS Number: CBMRJ

CHEMTRONICS INC

8125 COBB CENTER DR
KENNESAW, GA 30144
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 800-832-5401

Preparer: MICHAEL S. WATKINS

Cage: 2M589

CHEMTRONICS INC (CANCELLED USE 21267)

HAUPPAUGE, NY 11760 US

Telephone: 770-424-4888/800-645-5244

Cage: 2M589

COPPER (SARA 313) (CERCLA)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 90-98%

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2 MG/M3 FUME

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ROSIN; (ROSIN ACID)

CAS: 8050-09-7

RTECS: VL0480000

Fraction By Weight: 2-10%

OSHA PEL 10 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:NO EFT EXPECTED UNDER NORMAL
CNDTNS OF USE. VAPS RELS FROM OTHER MATLS USED IN DESOLDERING
PROCESS MAY CAUSE IRRIT. SKIN:PRLNG CONT MAY CAUSE IRRIT.
INGEST:HARMFUL IF SWALLOWED. METAL CONT MAY BE IRRIT TO MOUTH,
THROAT & STOM TISSUES.INHAL:NO EFTS EXPECTED UNDER NORMAL CNDTNS OF
USE. VAPS FROM (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:OTHER MATLS USED IN DESOLDERING
PROCESS MAY CAUSE IRRIT OF MOUTH, NOSE & THROAT. TOXICOLOGICAL
INFO:INHAL:INHAL OF DUST & FUMES DURING DESOLDERING CAN IRRIT RESP
TRACT. LONG-TERM ACUTE OVEREX P TO FUMES DURING DESOLDERING CAN
LEAD TO LEAD POIS. INGEST/SKIN:CAN CAUSE ALLERGIC RXN IN SOME
INDIVIDUALS. (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:EYES:IMMED FLUSH W/PLENTY OF WATER. AFTER INITIAL FLUSHING,
REMOVE ANY CONTACT LENSES & CONTINUE FLUSHING FOR AT LST 15 MINS.
HAVE EYES EXAMINED & TESTED BY MED PERS IF IRRIT DEVELOPS/PERSISTS.
SKIN:W ASH W/SOAP & WATER. REMOVE CONTAM CLTHG. GET MED ATTN IF
IRRIT DEVELOPS/PERSISTS. WASH CLTHG SEPARATELY BEFORE REUSE.
INGEST:DO NOT INDUCE VOMIT. GET IMMED MED ATTN. INHAL:REMOVE VICTIM
TO (SUPP DATA)

Flash Point:NONFLAMMABLE
Extinguishing Media:WATER FOG, CO*2, DRY CHEMICAL, FOAM ARE COMPATIBLE
FOR EXTING FIRES INVOLVING OTHER MATLS WHEN SODER-WICK IS PRESENT.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:SMALL SPILLS:PICK UP SPILLED BRAID. IF SOILED
OR DIRTY STORE IN CLOSED CONTAINER FOR DELIVERY TO A METALS
RECYCLING CENTER. DO NOT DISPOSE OF BY PLACING IN TRASH.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID PROLONGED OR REPEATED CONTACT
W/EYES, SKIN. USE W/ADEQUATE VENTILATION. AVOID BREATHING VAPORS
GIVEN OFF BY THE DESOLDERING PROCESS.
Other Precautions:STORE IN A COOL, DRY PLACE. KEEP CONTAINER CLOSED
WHEN NOT IN USE. KEEP OUT OF REACH OF CHILDREN. THIS MATERIAL OR
THE DESOLDERING PROCESS DOES NOT HAVE ESTABLISHED EXPOSURE LIMITS.

Respiratory Protection:WEAR A NIOSH/MSHA APPROVED POSITIVE PRESSURE
AIR-SUPPLIED RESPIRATOR IN SITUATIONS WHERE THERE MAY BE A
POTENTIAL FOR AIRBORNE EXPOSURE.
Ventilation:GOOD GEN VENT SHOULD BE SUFFICIENT TO CONTROL AIRBORNE
LEVELS OF DESOLDERING PROCESS VAPS. LOC EXHST VENT MAY BE(SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS BEFORE EATING.
Supplemental Safety and Health
EFTS OF OVEREXP:EYE:CONT W/ROSIN DUST & DESOLDERING FUMES CAN IRRIT
EYES. FIRST AID PROC:FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP. IF
BRTHG IS DFCLT, GIVE OXYGEN. GET MED ATTN. VENT:NEC TO CONTROL ANY
AIR CONTAMINANTS TO W/IN THEIR TLV'S DURING THE USE OF THIS
PRODUCT.

Boiling Pt:B.P. Text:604F,318C
Melt/Freeze Pt:M.P/F.P Text:1083F,584C
Vapor Pres:100 @ 317F
Vapor Density:>1
Spec Gravity:8.92 (H*2O=1)
Evaporation Rate & Reference:>1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:COPPER METALLIC COLOR, ROSIN COATED BRAIDED COPPER
WIRE; SHARP, METALLIC ODOR.

Stability Indicator/Materials to Avoid:YES
DO NOT MIX W/POWDERED ALKALI & ALKALINE EARTH METALS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:VAPORIZED COPPER AT EXTREMELY HIGH
TEMPERATURES.

Waste Disposal Methods:DISPOSE OF I/A/W ALL FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.