CBNBZ - INSTALOID

  • MSDS: CBNBZ
  • Manufacturer: CMP INDUSTRIES INC
  • Product Name: INSTALOID
  • National Stock Number: 6520-00N071072
Product Identification

Product ID:INSTALOID
MSDS Date:11/01/1994
FSC:6520
NIIN:00N071072
MSDS Number: CBNBZ

Responsible Party
CMP INDUSTRIES INC
413 N PEARL ST
ALBANY, NY 12207
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 518-434-3147

Cage: 20750

Contractor
CMP INDUSTRIES INC
ALBANY, NY 12201 US

Telephone: 518-434-3147

Cage: 20750

Ingredients

0.08, VAP

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: 45-50%

OSHA PEL N/K

ACGIH TLV: 10 MG/M3 (MFR)


SILICA, AMORPHOUS, DIATOMACEOUS EARTH; (SILICA)

CAS: 61790-53-2

RTECS: HL8600000

Fraction By Weight: <5%

OSHA PEL 20 MPPCF

ACGIH TLV: 10 MG/M3 TDUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO PARTICULAR HAZARD, BUT NORMAL GOOD
CLEANING SHOULD BE USED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:REPEATED EXCESSIVE INGESTION MAY
CAUSE CENTRAL NERVOUS SYSTEM EFFECTS.

First Aid

First Aid:INGESTION:CALL MD IMMEDIATELY . INHALATION:REMOVE TO FRESH
AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IRRIGATE
IMMEDIATELY WITH WATER FOR AT LEAST 15 MINUTES. SKIN:WASH OFF IN
FLOW ING WATER. GET MEDICAL ATTENTION IF IRRITATION DEVELOPS.

Fire Fighting

Extinguishing Media:NON-FLAMMABLE. USE EXTINGUISHING MEDIA APPROPRIATE
TO SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

Accidental Release

Spill Release Procedures:IF MOLTEN, ALLOW TO COOL. SCRAPE UP AND
DISCARD. USE SOAP AND WATER TO REMOVE RESIDUE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE GEL IN A AIR TIGHT CONTAINER.
EXERCISE REASONABLE CARE AND CAUTION.
Other Precautions:FOR MOLTEN MATERIAL, AVOID SPILLING HOT LIQUID.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NOT APPLICABLE.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:220F,104C
Vapor Pres:SEE ING 1
Vapor Density:SEE ING 1
Spec Gravity:1.4 (H*2O=1)
pH:7.0
Solubility in Water:SLIGHTLY
Appearance and Odor:PINK ODORLESS THERMOSET GEL.

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL.
Stability Condition to Avoid:STABLE UNDER NORMAL CONDITION.
Hazardous Decomposition Products:PROPION ALDEHYDE, CARBON MONOXIDE IN
THE PRESENCE OF LIMITED OXYGEN.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.