Product ID:SL100-2X1
MSDS Date:06/01/1987
FSC:8010
NIIN:00N071352
MSDS Number: CBNQP

ZYMET INC

7 GREAT MEADOW LANE
HANOVER, NJ 07936
US

Emergency Phone: 201-428-5245

Info Phone: 201-428-5245

Preparer: KARL I. LOH

Cage: 010V7

ZYMET INC

HANOVER, NJ 07936 US

Telephone: 201-428-5245

Cage: 010V7

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 20-25%

OSHA PEL N/K

ACGIH TLV: N/K

SILVER; (METALLIC SILVER PIGMENT) (SARA 313) (CERCLA)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 65-75%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

PROPANE, 1-CHLORO-2,3-EPOXY-; (EPOXY RESIN EPICHLOROHYDRIN

CAS: 106-89-8

RTECS: TX4900000

Fraction By Weight: <0.1%

OSHA PEL N/K

ACGIH TLV: N/K

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NOT APPLICABLE. CHRONIC:
IRRITATION, SENSITIZATION AND DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) . EYES: FLUSH EYES WITH WATER FOR AT
LEAST 15 MINUTES. CALL MD. SKIN: WASH THOROUGHLY WITH MILD SOAP AND
WATER. INGEST: DRINK WATER OR MILK, INDUCE VOMITING. CALL MD.

Flash Point Method:CC
Flash Point:>464F,>240C
Extinguishing Media:FOAM, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTION AND DECOMPOSITION PRODUCTS MAY
BE TOXIC.

Spill Release Procedures:AVOID SKIN CONTACT. CLEAN UP WITH ABSORBENT
MATERIAL. WASH AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE REFRIGERATED. AVOID SKIN
CONTACT.
Other Precautions:PRODUCT IS NOT CONSIDERED A HAZARDOUS MATERIAL. IT IS
UNLIKELY THAT NORMAL WORK OPERATIONS WITH THESE PRODUCTS WILL
APPROACH OSHA LIMITS FOR HAZARDOUS MATERIALS.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR IF NEEDED.
Ventilation:GOOD VENTILATION. CURE IN VENTED OVEN.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
BARRIER CREAM RECOMMENDED.
Work Hygienic Practices:THIS MIX CNTNS EPOXY RESIN & SHOULD BE HANDLED
W/GOOD HOUSEKEEPING PROCEDURES NORMALLY ASSOCIATED W/HNDLG EPOXY
RESINS.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:NONE
Vapor Pres:1
Vapor Density:8
Spec Gravity:2.6 (H*2O=1)
Solubility in Water:SLIGHT
Appearance and Odor:SILVER COLORED FLOWABLE PASTE; LOW ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, MOISTURE, ACIDS, ALKALIES.
Stability Condition to Avoid:HEAT ABOVE 100F IN STORAGE (QUANTITIES
UNDER 100 GRAMS NOT AFFECTED).
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
NITROGEN OXIDES.

Waste Disposal Methods:INCINERATE BY FEDERAL, STATE AND LOCAL APPROVED
METHODS. CONTACT YOUR LOCAL AUTHORITIES FOR SPECIFIC DETAILS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.