CBPJQ - FX-764 A COMPONENT

  • MSDS: CBPJQ
  • Manufacturer: FOX INDUSTRIES INC
  • Product Name: FX-764 A COMPONENT
  • National Stock Number: 8040-00N071751
Product Identification

Product ID:FX-764 A COMPONENT
MSDS Date:04/01/1993
FSC:8040
NIIN:00N071751
Kit Part:Y
MSDS Number: CBPJQ

Responsible Party
FOX INDUSTRIES INC
3100 FALLS CLIFF RD
BALTIMORE, MD 21211
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 410-243-8856

Cage: 8U180

Contractor
FOX INDUSTRIES INC
BALTIMORE, MD 21211 US

Telephone: 301-243-8856

Cage: 8U180

Ingredients

EPOXY RESIN

CAS: 25085-99-8

OSHA PEL N/K

ACGIH TLV: N/K


TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM

CAS: 14807-96-6

RTECS: WW2710000

OSHA PEL 20 MPPCF Z-3

ACGIH TLV: 2 MG/M3 RDUST


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE SLIGHT EYE
IRRITATION, MAY CAUSE ALLERGIC SKIN REACTION. CHRONIC: NONE
SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN IRRITATION.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
THOROUGHLY WITH SOAP AND WATER. INGESTION: INDUCE VOMITING IF LARGE
AMOUNTS ARE INGESTED. INHALATION: REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE OXYGEN OR ARTIFICIAL RESPIRATION).

Fire Fighting

Flash Point Method:PMCC
Flash Point:>200F,>93C
Extinguishing Media:USE FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:SCOOP UP MATERIAL AND COLLECT IN SUITABLE
CONTAINERS. RESIDUAL CAN BE CLEANED WITH HOT SOAPY WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID SKIN CONTACT. KEEP CONTAINERS
CLOSED. AVOID BREATHING VAPORS IF MATERIAL IS HEATED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE NORMALLY NEEDED. USE NIOSH APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL (GENERAL) VENTILATION: GOOD GENERAL EXHAUST.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . GOOD CLEAN WORK CLOTHING.
Work Hygienic Practices:FOLLOW PRACTICES OF GOOD INDUSTRIAL HYGIENE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:NONE
Spec Gravity:1.40 (H*2O=1)
Solubility in Water:SLIGHT
Appearance and Odor:OFF WHITE PASTE, WITH MILD ODOR

Stability

Stability Indicator/Materials to Avoid:YES
ACID, BASE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE.
Conditions to Avoid Polymerization:AMINE COMPOUNDS UNDER UNCONTROLLED
CONDITIONS.

Disposal

Waste Disposal Methods:BURN IN ADEQUATE INCINERATOR OR BURY IN APPROVED
LANDFILL. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.