CBPKR - BR-831 PART A ADHESIVE
- MSDS: CBPKR
- Manufacturer: BURKE INDUSTRIES
- Product Name: BR-831 PART A ADHESIVE
- National Stock Number: 8040-00N071772
Product Identification
Product ID:BR-831 PART A ADHESIVE
MSDS Date:01/12/1996
FSC:8040
NIIN:00N071772
MSDS Number: CBPKR
Responsible Party
SAN JOSE, CA 95112
US
Emergency Phone: 408-297-3500
Info Phone: 408-297-3500
Cage: 96780
Contractor
Telephone: 408-297-3500
Cage: 96780
Ingredients
BISPHENOL A EPOXY RESIN
CAS: 25036-25-3
Fraction By Weight: 45-50%
OSHA PEL N/K
ACGIH TLV: N/K
EPICHLOROHYDRIN-POLYGLYCOL REACTION PRODUCT
CAS: 41638-13-5
Fraction By Weight: 5-10%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY CAUSE MILD SKIN IRRITATION.
SIGNS OF OVEREXPOSURE:INHALATION:VAPORS UNLIKELY DUE TO PHYSICAL
PROPERTIES. EYES:MAY CAUSE SLIGHT TRANSIENT (TEMPORARY) EYE
IRRITATION. SKIN:MAY CAUSE SLIGHT IRR ITATION. INGESTION:NOT LIKELY
ROUTE OF ENTRY UNDER PROPER HANDLING CONDITIONS. CHRONIC:MAY CAUSE
MILD SKIN IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:EYES:FLUSH W/WATER FOR AT LEAST 15 MINUTES. IF IRRITATION
PERSISTS, SEEK MEDICAL ATTENTION. SKIN:WASH WITH SOAP & WATER. IF
IRRITATION PERSISTS, SEE A PHYSICIAN. INHAL:REMOVE TO FRESH AIR, IF
NEEDED A DMINISTER OXYGEN & IF NECESSARY, SEEK MEDICAL ATTENTION.
INGEST:DO NOT INDUCE VOMITING. CALL PHYSICIAN IMMEDIATELY. SINGLE
DOSE ORAL TOXICITY IS LOW.
Fire Fighting
Flash Point:>320F,>160C
Extinguishing Media:WATER, FOG, FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:DO NOT USE IN THE VICINITY OF EXCESSIVE
HEAT, HIGH TEMPERATURES.
Accidental Release
Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT AND CONTAIN
FOR SALVAGE OR DISPOSAL. DO NOT MIX SPILLED PART A WITH PART B -
KEEP SEPARATED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY PLACE (50F-90F).
KEEP AWAY FROM EXCESSIVE HEAT. PROTECT FROM FREEZING.
Other Precautions:NOT APPLICABLE.
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED. NIOSH APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST, DO NOT USE CLOSED AIR CIRCULATING SYSTEM.
OPEN WINDOWS AND DOORS IF NECESSARY.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:WASH HANDS AND FACE PRIOR TO EATING, DRINKING,
OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:1.50
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OFF WHITE LIQUID SEMI-SOLID WITH MILD EPOXY RESIN
ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME TEMPERATURES.
Hazardous Decomposition Products:OXIDES OF CARBON, WATER, AND NORMAL
HYDROCARBON COMBUSTION PRODUCTS.
Disposal
Waste Disposal Methods:PER LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.