Product ID:NRW-37 ION EXCHANGE RESIN
MSDS Date:03/01/1994
FSC:6810
NIIN:01-370-4210
MSDS Number: CBSMX

Emergency Phone: 610-668-9090

Info Phone: 215-668-9090

Cage: 67168

Telephone: 610-668-9090

Cage: 67168

HAZARDOUS INGREDIENTS.

RTECS: 9999999ZZ

Fraction By Weight: NONE

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Health Hazards Acute and Chronic:EYE CONTACT:LIKE OTHER FOREIGN BODIES
PARTICLES MAY CAUSE MECHANICAL IRRITATION OF EYE.
Effects of Overexposure:MECHANICAL IRRITATION OF EYE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE CONTACT:FLUSH WITH LARGE AMTS OF WATER FOR @LEAST 15MINS.
CONSULT PHYSICIAN IF IRRITATION PERSISTS.

Flash Point:NO FLASH POINT
Autoignition Temp:Autoignition Temp Text:427C
Lower Limits:NP
Upper Limits:NP
Extinguishing Media:CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR MSHA/NIOSH APPROVED PRESSURE DEMAND
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:RESIN BEADS ON FLOOR MAY MECHANICALLY CAUSE
FLOOR TO BE SLIPPERY. USE CARE TO AVOID FALLS. SWEEP UP & TRANSFER
TO CONTAINERS FOR RECOVERY OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP DRUMS AND PLASTIC BAGS SEALED TO
PREVENT DRYING OR MOISTURE LOSS.
Other Precautions:STORE BELOW 49C (120F) AND ABOVE 0C (32F).

Respiratory Protection:NONE.
Ventilation:NORMAL PLANT VENTILATION.
Eye Protection:SAFETY GLASSES (ANSI Z87.1).
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH AQUEOUS SLURRY 5-9.

HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:1.2
pH:SUPPLM
Viscosity:NP
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE.
Appearance and Odor:AMBER SPHERICAL BEADS WITHOUT ODOR.
Percent Volatiles by Volume:NP
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/CONCENTRATED NITRIC ACID OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID TEMPERATURES OVER 220C (428F).
Hazardous Decomposition Products:SDO2, SO3, CO, CO2, STYRENE MONOMER,
DIVINYLBENZENE.

Waste Disposal Methods:THIS MATERIAL CAN BE DISPOSED OF AS ORDINARY
TRASH.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.