Product ID:UNSATURATED POLYESTER 31-001-00
MSDS Date:11/10/1993
FSC:8040
NIIN:00-633-8373
MSDS Number: CBTBH

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 800-334-5905

Preparer: EISENHARD

Cage: 0DR81

Telephone: 800-424-9300 (CHEMTREC)

Cage: 0DR81

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

LD50 LC50 Mixture:ORAL LD50 (RAT): 5 GM/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR FREQUENT SKIN CONTACT MAY
CAUSE DEFATTING AND DRYNESS RESULTING IN DERMATITIS. EYE CONTACT
MAY CAUSE IRRITATION. INHALATION MAY CAUSE MUCOUS MEMBRANE
IRRITATION AND UPPER RESPIRATORY TRAC T IRRITATION. LIQUID SPLASHES
MAY RESULTIN MORE SERIOUS INJURY. INGESTION MAY CAUSE GI TRACT
DISTURBANCES, PAIN.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:SKIN IRRITATION/DEFATTING/DRYNESS/DERMATITIS.
EYE IRRITATIO, TEARING. MUCOUS MEMBRANE IRRITATION, UPPER
RESPIRATORY TRACT IRRITATION, GI TRACT DISTURBANCES, PAIN,
DISCOMFORT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL
ATTENTION. INH ALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET
MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. IF OCCURS,
KEEP HEAD BELOW HIPS. GET MEDICAL ATTENTION.

Flash Point Method:TCC
Flash Point:89.0F,31.7C
Lower Limits:1.10 %
Upper Limits:NOT GIVEN
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL,
WATER SPRAY, ANY CLASS B FIRE EXTINGUISHER.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE GEAR. COOL TANKS AND
CONTAINERS EXPOSED TO FIRE WITH WATER.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES POLYMERIZATION
MAY TAKE PLACE. POLYMERIZATION MAY CAUSE A VIOLENT RUPTURE OF THE
CONTAINER. PRODUCT VAPORS MAY FORM EXPLOSIVE MIXTURE.

Spill Release Procedures:EVACUATE ALL NON-ESSENTIAL PERSONNEL. REMOVE
ALL SOURCES OF IGNITION (FLAME, SPARK SOURCES, HOT SURFACES).
VENTILATE AREA. CONTAIN AND REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID STORAGE ABOVE 100F. AVOID
PROLONGED OR REPEATED SKIN CONTACT. AVOID INHALATION OF HEATED
VAPORS OR SPRAY MISTS. AVOID IMPROPER MIXING.
Other Precautions:A PROMOTER AND CATALYST USE WTIH THIS PRODUCT SHOULD
ALWAY S BE MIXED SEPARATELY WITH THE PRODUCT AND NEVER MIXED
TOGETHER.

Respiratory Protection:IF EXPOSURE MAY OR DOES EXCEED OCCUPATION
EXPOSURE LIMITS USE A NIOSH-APPROVED RESPIRATOR TO PREVENT
OVEREXPOSURE. IN ACCORD WITH 29 CFR 1910.134 USE EITHER AN
ATMOSPHERE-SUPPLYING RESPIRATOR OR AN AI R-PURIFYING RESPIRATOR.
Ventilation:EXHAUST VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATIONS BELOW RESPECTIVE TLV'S.
Protective Gloves:COTTON, NEOPRENE, RUBBER, POLYETHYLENE
Eye Protection:CHEMICAL GOGGLES, SAFETY GLASSES W/SIDES
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING AS NECESSARY TO
PREVENT SKIN CONTACT. AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.

HCC:F3
Boiling Pt:=146.1C, 295.F
Melt/Freeze Pt:M.P/F.P Text:N/GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:1.140
Evaporation Rate & Reference:< 1 (N-BUTYL ACETATE=1)
Solubility in Water:NOT GIVEN
Appearance and Odor:AMBER LIQUID, PUNGENT ODOR
Percent Volatiles by Volume:30-35%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, OPEN FLAMES,
DIRECT SUNLIGHT
Hazardous Decomposition Products:IRRITATING, ACRID FUMES
Conditions to Avoid Polymerization:MAY OCCUR. AVOID ELEVATED
TEMPERATURES.

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.