Product ID:MINI GRIND-O-FLEX
MSDS Date:06/16/1986
FSC:5350
NIIN:00N072857
MSDS Number: CBZCD

MERIT ABRASIVE PRODUCTS INC

201 W MANVILLE ST
COMPTON, CA 90224
US

Emergency Phone: 213-774-6650

Info Phone: 213-774-6650

Cage: 00179

MERIT ABRASIVE PRODUCTS INC

COMPTON, CA 90224 US

Telephone: 213-774-6650

Cage: 00179

ALUMINUM OXIDE (MFR CAS # 1349-28-1)

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: 60%

OSHA PEL 15 MG/M3(TDUST)(MFR)

ACGIH TLV: 10 MG/M3 (MFR)

CLOTH & BINDER

RTECS: 9999999ZZ

Fraction By Weight: 40%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION DURING USE: MAY
CAUSE COUGH, SHORTNESS OF BREATH (DUST). INGESTION: (DUST) NO KNOWN
ADVERSE EFFECTS BUT INGESTION IS NOT RECOMMENDED. SKIN CONTACT &
ABSORPTION: NOT ABSORBED THROUGH SKIN; MAY CAUSE ABRASIONS. EYE:
DUST MAY IRRITATE EYES. CHRONIC: INHALATION DURING USE MAY AFFECT
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:BREATHING CAPACITY. OTHER POTENTIAL
HEALTH RISKS: DURING USE ON SOME MATERIALS, ELEVATED SOUND LEVELS
MAY AFFECT HEARING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALATION: REMOVE TO FRESH AIR; APPLY ARTIFICIAL RESPIRATION
AS NEEDED, OBTAIN MEDICAL ASSISTANCE AS NEED. INGESTION: OBTAIN
FIRST AID OR MEDICAL ASSISTANCE AS NEEDED. SKIN: OBTAIN FIRST AID
OR MEDIC AL ASSISTANCE AS NEEDED. EYE: WASH WITHLARGE AMOUNTS OF
WATER FOR AT LEAST 15 MINUTES. OBTAIN FIRST AID OR MEDICAL
ASSISTANCE AS NEEDED. OTHER POTENTIAL HEALTH RISK: OBTAIN MEDICAL
ASSISTANCE.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . BACKING & RESIN BINDER WILL BURN & DECOMPOSE - USE
NIOSH APPRVD RESPIRATING EQUIPMENT.
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

Spill Release Procedures:NORMAL CLEAN UP PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:HANDLE WITH ADEQUATE VENT-OSHA 29 CFR
1910.94 (VENTILATION) AND OSHA 29 CFR 1910.10 (AIR CONTAMINANTS).
Other Precautions:SLIGHT ODOR OF FORMALDEHYDE OR PHENOLIC RESIN MAY BE
RELEASED ON OCCASION DURING STORAGE.

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL: RECOMMENDED. MECHANICAL (GENERAL): RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD: SIGNIFICANTLY GREATER THAN THE COATED ABRASIVE
PARTICLES.

Appearance and Odor:CLOTH COATED WITH ABRASIVE MATERIAL.

Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:IN USE, DUST & DECOMPOSING RESIN FUMES
ARE GENERATED; IN MOST CASES, THE MATL REMOVED FROM THE WORKPIECE
WILL BE(SUPDAT)

Waste Disposal Methods:STANDARD LANDFILL - CONSISTENT WITH FEDERAL,
STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.