CBZFD - HF-1189CF FLEX CORED SOLDER
- MSDS: CBZFD
- Manufacturer: KESTER SOLDER
- Product Name: HF-1189CF FLEX CORED SOLDER
- National Stock Number: 3439-00N072912
Product Identification
Product ID:HF-1189CF FLEX CORED SOLDER
MSDS Date:09/22/1993
FSC:3439
NIIN:00N072912
MSDS Number: CBZFD
Responsible Party
DES PLAINES, IL 60018
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 708-297-1600
Preparer: M WISE
Cage: GO345
Contractor
Telephone: 847-297-1600
Cage: 75297
Ingredients
LEAD (SARA 313) (CERCLA)
CAS: 7439-92-1
RTECS: OF7525000
OSHA PEL SEE 1910.1025
ACGIH TLV: 0.15MG/M3 DUST
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TIN
CAS: 7440-31-5
RTECS: XP7320000
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
SILVER (SARA 313) (CERCLA)
CAS: 7440-22-4
RTECS: VW3500000
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
BISMUTH
CAS: 7440-69-9
RTECS: EB2600000
OSHA PEL N/K
ACGIH TLV: N/K
ANTIMONY (SARA 313) (CERCLA)
CAS: 7440-36-0
RTECS: CC4025000
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG (SB)/M3
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CARBOXYLIC ACID
CAS: 68603-86-1
Fraction By Weight: 3%
OSHA PEL N/K
ACGIH TLV: N/K
NOT APPLICABLE.
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:FLUX FUMES DURING
SOLDERING MAY CAUSE IRRITATION AND DAMAGE OF MUCOUS MEMBRANES AND
RESPIRATORY SYSTEM. SKIN CONTACT:POSSIBLE LOCAL IRRITATION BY
CONTACT WITH FLUX OR FUMES. SKIN ABSO RP:NONE. EYE CONTACT:IRRIT
FROM CONT W/SMOKE FROM SOLDERING. INGEST:NOT LIKELY TO OCCUR.
CHRONIC:(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:LEAD APPEARS ON NAVY OCCUPATIONAL
CHEM REPRO HAZ LIST. SEEK CONSULTATION FROM APPROP HLTH
PROFESSIONALS CONCERNING LATEST HAZ LIST INFO & SAFE HNDLG & EXPOS
INFO . BRTHG FUMES DURING S OLDERING MAY CAUSE RESP IRRIT, HDCH &
IRRIT OF MUC MEMBS. RPTD INGEST OF LEAD CAN RSLT IN SYSTEMIC
POISONING.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS OF THE
LUNGS, DISEASES OF THE BLOOD AND BLOOD-FORMING ORGANS, KIDNEYS,
NERVES AND POSSIBLY REPRODUCTIVE SYSTEM.
First Aid
First Aid:INGESTION:CALL MD IMMEDIATELY . EYE CONTACT:FOR BURNS FLUSH
IMMEDIATELY WITH COOL WATER FOR AT LEAST 15 MINUTES. FOR FUME
IRRITATION USE EYE DROPS AND REMOVE FROM EXPOSURE. SKIN:FOR BURNS
FLUSH IMMEDIATELY WITH COOL WATER. IF A RASH DEVELOPS FROM FLUX
FUMES, REMOVE PERSON FROM EXPOSURE AND WASH SKIN WITH SOAP AND
WATER. INHALATION:REMOVE PERSON FROM EXPOSURE TO FUMES.
Fire Fighting
Flash Point Method:TOC
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:FLUX IN CORED SOLDER MAY IGNITE WHEN THE
SOLDER MELTS IN A FIRE. HAZ COMBUST PRODS:MELTED SOLDER MAY
LIBERATE CARBON MONOXIDE, CARBON DIOXIDE, LEAD OXIDE FUMES.
Accidental Release
Spill Release Procedures:MELTED SOLDER WILL SOLIDIFY ON COOLING AND CAN
BE SCRAPED UP. USE CAUTION TO AVOID BREATHING FUMES IF A GAS TORCH
IS USED TO CUT UP LARGE PIECES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:CAUTION:EMPTY CONTAINERS MAY CONTAIN
PRODUCT RESIDUE. OBSERVE ALL LABEL PRECAUTIONS.
Other Precautions:STORE AWAY FROM SOURCES OF SULFUR. WASH HANDS AFTER
HANDLING SOLDER CONTAINING LEAD BEFORE EATING OR SMOKING. AVOID
BRTHG SMOKE/FUMES GENERATED DURING SOLDERING. DO NOT PLACE FLUX
CORED SOLDER INTO HO T SOLDER POT BECAUSE FLUX MAY IGNITE.
Exposure Controls
Respiratory Protection:USUALLY NOT REQUIRED. WHEN VENTILATION IS NOT
SUFFICIENT TO REMOVE FUMES FROM THE BREATHING ZONE, A NIOSH
APPROVED CARTRIDGE TYPE RESPIRATOR SHOULD BE WORN.
Ventilation:PROVIDE ADEQUATE EXHAUST VENTILATION (GENERAL AND/OR LOCAL)
TO MEET TLV REQUIREMENTS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER .
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING SOLDER
CONTAINING LEAD BEFORE EATING OR SMOKING.
Supplemental Safety and Health
HAZ DECOMP PRODS:AS ALIPHATIC ALDEHYDES, ACIDS AND TERPENES. NO LEAD IS
DETECTED IN FUMES FROM SOLDERING BELOW 1000F (537C).
Chemical Properties
Spec Gravity:>1 (H*2O=1@25C)
Solubility in Water:0 (% BY WEIGHT)
Appearance and Odor:SILVER-GRAY METAL IN WIRE, RIBBON OR PREFORMED
SHAPES WITH A CORE OF FLUX.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACID, STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WHEN HEATED TO SOLDERING TEMPS, SOLV
IN FLUX WILL BOIL AWAY & CARRY DROPLETS OF THERMAL DEGRADATION
PRODS SUCH (SUP DAT)
Disposal
Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . SOLDER CAN BE RECLAIMED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.