Product ID:PLASTIC STEEL PUTTY (A) RESIN, 10110
MSDS Date:03/08/1995
FSC:8030
NIIN:01-413-5871
Kit Part:Y
MSDS Number: CCBJN

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 508-777-1100

Cage: JO305

Telephone: 508-777-1100

Cage: JO305

BISPHENOL A-EPICHLOROHYDRIN COPOLYMER;(BISPHENOL A

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 10-30%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:LD50:(ORAL,RAT) 11400 MG/KG(EPOXY RESIN)
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: MILD IRRIT. METAL FILLER
PARTICLES COULD SCRATCH CORNEA. SKIN: MINIMAL TO MILD IRRITATION IN
MOST PEOPLE. INGEST: ALL INGREDIENTS ARE OF LOW ACUTE ORAL
TOXICITY. CHRONIC: APPROX 1% OF WORK ERS MAY BECOME SENSITIZED BY
TOO MUCH SKIN CONTACT W/EPOXY RESINS; ITCHING, SWELLING/RASHES
MAY(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: THEN RESULT FROM FURTHER CONTACT.
Medical Cond Aggravated by Exposure:ALLERGIES, ECZEMA AND OTHER SKIN
DISORDERS.

First Aid:EYE: FLUSH W/CLEAN WATER FOR AT LEAST 15 MINS WHILE GENTLY
HOLDING EYELIDS OPEN. GET MED ATTN. SKIN: WASH THORO W/SOAP & WARM
WATER. CONSULT MD IF IRRIT DEVELOPS. INHAL: REMOVE PATIENT TO FRESH
AIR. A DMIN O*2 IF BRTHG IS DIFFICULT. GET MEDATTN. INGEST: DO NOT
INDUCE VOMITING. DILUTE W/TWO GLASSES OF WATER AND GET MED ATTN.

Flash Point Method:PMCC
Flash Point:>400F,>204C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:PVNT SKIN CONTACT. SCRAPE UP & DISCARD IN
SUITABLE CNTNRS, USING INERT ABSORB MATL SUCH AS VERMICULITE IF
NEEDED. WASH SPILL AREA W/INDUSTRIAL CLEANING AGENT; IF SOLVENT IS
USED, TAKE CARE AGAINST OVE REXPOSURE & FIRE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE WELL CLSD IN COOL, DRY PLACE.
AFTER MIXING W/HARDENER, OBSERVE PRECS RECOMM FOR HARDENER. AFTER
PROPER CURING PROD IS NOT HAZ.
Other Precautions:WHEN SANDING OR MACHINING THE CURED MATL, TAKE PROPER
PRECAUTIONS AGAINST INHALATION OF THE DUSTS GENERATED. THE
NUISANCE-DUST TLV OR 3.5 MG/M3 SHOULD BE OBSERVED FOR THESE
PARTICLES.

Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPERATURES.
USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN.
Ventilation:LOCAL EXHAUST IS RECOMMENDED FOR CONFINED AREAS. GENERAL
MECHANICAL VENT IS ADEQUATE FOR NORMAL USE.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA.
Work Hygienic Practices:WASH THORO AFTER USING, EXPECT BEFORE
EATING/SMOKING. CONTAMD CLTHG & PROT GEAR SHOULD BE REMOVED &
CLEANED(SUPDAT)
Supplemental Safety and Health
HYGIENE PRAC: BEFORE RE-USE. LEATHER ARTICLES SUCH AS SHOES AND BELTS
CANNOT BE DECONTAMINATED AND SHOULD BE DISCARDED.

HCC:B3
Vapor Pres:NIL @ 78
Vapor Density:>1
Spec Gravity:2.8
pH:7.0
Evaporation Rate & Reference:<<1 (BUAC=1)
Solubility in Water:NIL
Appearance and Odor:DARK GREY PASTE W/LITTLE ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES AND OXIDIZERS.
Stability Condition to Avoid:OPEN FLAME AND EXTREME HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON, ALDEHYDES AND ACIDS
FROM IMCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:HEAT IS RELEASED WHEN THIS RESIN IS
MIXED W/EPOXY HARDENER. USE CAUTION WHEN MIXING A POUND OR MORE.

Waste Disposal Methods:THE RESIN CONTAINS NO RCRA/CERCLA LISTED
HAZARDOUS WASTES. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.