CCGMK - 6064200 INITIATOR, EXPLOSIVE MECHANICALLY ACTUATED

  • MSDS: CCGMK
  • Manufacturer: SCOT INC
  • Product Name: 6064200 INITIATOR, EXPLOSIVE MECHANICALLY ACTUATED
  • National Stock Number: 1377-01-262-0521
Product Identification

Product ID:6064200 INITIATOR, EXPLOSIVE MECHANICALLY ACTUATED
MSDS Date:03/06/1992
FSC:1377
NIIN:01-262-0521
MSDS Number: CCGMK

Responsible Party
SCOT INC.
2525 CURTISS ST
DOWNERS GROVE, IL 60515-0705
US

Emergency Phone: 800-535-5053

Info Phone: 708-969-0620

Preparer: NICHOLAS F TURCIC

Cage: MO896

Contractor
SCOT INC.
DOWNERS GROVE, IL 60515-0705 US

Telephone: 708-969-0620

Cage: MO896

Ingredients

LEAD AZIDE

CAS: 13424-46-9

RTECS: OF8650000

Fraction By Weight: 40%


HNS HEXANITROSTILBENE

Fraction By Weight: 60%


STAINLESS STEEL

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NONE

First Aid

First Aid:OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Extinguishing Media:USE WATER ONLY. LARGE: FLOOD AREA W/WATER FROM A
DISTANCE.
Fire Fighting Procedures:MOVE CONTAINER W/O RISK. APPLY COOLING WATER
TO SIDES. IN CARGO AREA USE UNMANNED HOSE HOLDER/MONITOR NOZZLES.
IF NOT POSSIBLE WITHDRAW & LET FIRE BURN.
Unusual Fire/Explosion Hazard:USE FLOODING QUANTITIES OF WATER AS FOG.
COOL W/WATER, APPLY FROM AS FAR A DISTANCE AS POSSIBLE. EVACUATE TO
A RADIUS OF 1500 FEET. (SEE SUPP)

Accidental Release

Spill Release Procedures:INITIATE BY REMOTELY EXTRACTING THE SEAR. THE
INITIATOR SHOULD BE CONTAINED TO PREVENT HAZARDS OF SHRAPNEL.

Handling

Handling and Storage Precautions:GAS PRESSURE ENTERING THE INLET PORT
WILL ACTUATE THE PISTON WHICH UPON IMPACT WILL DETONATE THE LEAD
AZIDE & INTURN DETONATES THE HEXANITROSTIBENE.
Other Precautions:USE CAUTION IN HANDLING ACTUATED DEVICE SURFACE TEMP
MAY BE 200F. KEEP FIRE AWAY.

Exposure Controls

Supplemental Safety and Health
FIRE & EXPLOSION CONT'D: IF INITIATOR IS INITIATED SOME LIGHT METALLIC
FRAGMENTATION WOULD OCCUR W/A HOT DISCHARGE THAT WOULD POSE A FIRE
HAZARD. MODERATE EXPLOSION HAZARD WHEN SHOCKED/EXPOSED TO HEAT .
MINIMAL NOXIOUS GASES LIBERATED IF HERMETIC SEAL SHOULD RUPTURE.

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SHOCK, HEAT, FLAMES, IMPACT
Hazardous Decomposition Products:NOXIOUS GASES

Disposal

Waste Disposal Methods:DISPOSAL OF WASTE IS PERFORMED BY QUALIFIED
DEMOLITION PERSONNEL IAW/FEDERAL, STATE & LOCAL REGULATIONS.
EXPLOSIVE CLASS C UN0173.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.