Product ID:7XXX ALUMINUM
MSDS Date:04/17/1986
FSC:3439
NIIN:00F051151
MSDS Number: CCGWR

AMERICAN STEEL AND ALUMINUM CORPORATION

CROWN ROAD
LIVERPOOL, NY 13088-5000
US

Emergency Phone: 617-762-8014

Info Phone: 617-762-8014

Cage: 61456

AMERICAN STEEL AND ALUMINUM CORPORATION

620 MIDDLETOWN, PA 17057 US

Telephone: 617-762-8014

Cage: 61456

ALUMINUM *96-3*

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 90-99.7%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

COBALT (ANIMAL CARCINOGEN BY IARC - GROUP 2B) *96-3*

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: <1-10%

OSHA PEL 0.1 MG/CUM

ACGIH TLV: 0.05 MG/CUM

COPPER (DUST & MIST), BRONZE POWDER *96-3*

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: <1-10%

OSHA PEL 0.1 MG(CU)/M3 (FUME)

ACGIH TLV: 0.2 MG/M3 (FUME)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

RED IRON OXIDE/IRON (III) OXIDE/FERRIC OXIDE/YELLOW FERRIC

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: <1-10%

OSHA PEL 10 MG/CUM

ACGIH TLV: 5 MG/CUM (FE)

LEAD, INORGANIC LEAD (IARC CARC GROUP 2B) *96-3*

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: <.2-0.7%

ACGIH TLV: 0.15 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

MAGNESIUM OXIDE, MAGNESIA

CAS: 1309-48-4

RTECS: OM3850000

Fraction By Weight: <1-10%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM

MANGANESE *96-3*

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: <1-10%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM (DUST)

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: <1-10%

ACGIH TLV: 10 MG/CUM

TIN *96-3*

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: <1-10%

OSHA PEL 2 MG/CUM

ACGIH TLV: 2.0 MG/CUM

ZINC OXIDE *96-3*

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: <1-10%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM FUME

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:OVEREXPOSURE TO COPPER FUMES CAN
RESULT IN UPPER RESPIRATORY TRACT IRRITATION, NAUSEA & METAL FUME
FEVER. NICKEL & CHROMIUM ARE HAZARDOUS AS FUME. OVEREXPOSURE TO
LEAD FUMES CAN CAUSE TOXIC EFFECTS AS CNS DISTURBANCES, RENAL
CHANGES, PERIPHERAL NEUROPATHY, GI DISTURBANCES, ANEMIA &
CHROMOSOMAL CHANGES.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:COPPER FUME: IRRITATION, NAUSEA, METAL FUME
FEVER. LEAD FUMES: CNS DISTURBANCES, RENAL CHANGES, PERIPHERAL
NEUROPATHY, GI DISTURBANCES, ANEMIA & CHROMOSOMAL CHANGES.

First Aid:SKIN: WASH THOROUGHLY W/SOAP & WATER. EYES: FLUSH THOROUGHLY
W/WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Extinguishing Media:DON'T USE WATER/HALOGEN ON DUST FIRES.
Fire Fighting Procedures:SMALL CHIPS, FINE TURNINGS & DUST MAY IGNITE
READILY. DAMP ALUMINUM DUST MAY SPONTANEOUSLY HEAT W/LIBERATION OF
HYDROGEN TO FORM EXPLOSIVE AIR MIXTURES. (SUPP)

Handling and Storage Precautions:DON'T TOUCH CAST ALUMINUM METAL/HEATED
ALUMINUM PRODUCT W/O KNOWING METAL TEMP. ALUMINUM EXPERIENCES NO
COLOR CHANGE DURING HEATING.
Other Precautions:BURNS COULD RESULT. ALUMINUM POWDER MUST BE PACKAGED
& SHIPPED AS FLAMMABLE SOLIDS. HARD ALLOY INGOTS IN 2000 & 7000
SERIES MUST BE STRESS RELIEVED TO PREVENT EXPLOSION WHEN SAWED.

Respiratory Protection:IF EXPOSURE LIMITS ARE EXCEEDED, USE NIOSH
APPROVED RESPIRATOR.
Protective Gloves:REQUIRED
Eye Protection:SAFETY GLASSES/SHIELD
Other Protective Equipment:AS NEEDED DEPENDING ON OPERATION & SAFETY
CODES.
Supplemental Safety and Health
FIRE CONT'D: MOLTEN ALUMINUM MAY EXPLODE ON CONTACT W/WATER/CERTAIN
METAL OXIDES. PRODUCT IS NON-HAZARDOUS UNTIL USED AS IN WELDING
PURPOSES. THE COMPOSITION & QUANTITY OF FUMES/GASES DEPENDS ON
METAL BEING WELDED, PROCESSED, ELECTRODES USED, POSITION OF
WELDERS HEAD W/RESPECT TO THE PLUME & PRESENCE OF CONTAMINANTS.

Melt/Freeze Pt:M.P/F.P Text:900-1200F
Spec Gravity:2.5-2.9
Solubility in Water:INSOLUBLE
Appearance and Odor:METALLIC APPEARANCE SOLID W/NO ODOR.

Stability Indicator/Materials to Avoid:YES
(SEE SUPP)
Stability Condition to Avoid:(SEE SUPP)
Hazardous Decomposition Products:HEAT: STRONG OXIDIZERS. WELDING: CO,
CO2, OZONE, NITROGEN OXIDES, INFRARED RADIATION & ULTRAVIOLET
RADIATION.

Waste Disposal Methods:USED/UNUSED PRODUCT SHOULD BE TESTED TO
DETERMINE HAZARD STATUS & DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.