Product ID:12003 CERTANIUM 889SP
MSDS Date:11/23/1993
FSC:3439
NIIN:01-222-5520
MSDS Number: CCJBV

CERTANIUM ALLOYS & RESEARCH COMPANY

4500 EUCLID AVENUE
CLEVELAND, OH 44103-3780
US

Emergency Phone: 216-391-8300

Info Phone: 216-391-8300

Cage: 61404

CERTANIUM ALLOYS & RESEARCH CO

CLEVELAND, OH 44103-1395 US

Telephone: 216-391-8300

Cage: 61404

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 30-50%

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 40-60%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9596

STRONTIUM CARBONATE

CAS: 1633-05-2

Fraction By Weight: 3-8%

GRAPHITE

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: <5%

ACGIH TLV: 2 MG/CUM RESP IC

CALCIUM FLUORIDE (AS F)

CAS: 7789-75-5

RTECS: EW1760000

Fraction By Weight: <5%

STRONTIUM FLUORIDE

CAS: 7783-48-4

RTECS: WK8925000

Fraction By Weight: <3%

OSHA PEL 2.5 MG/M3 AS F

ACGIH TLV: 2.5 MG/M3 AS F

ALUMINUM (SARA 313)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: <5%

OSHA PEL 15 MG/M3 DUST

ACGIH TLV: 10 MG/M3 DUST; 9596

BARIUM CARBONATE

CAS: 513-77-9

RTECS: CQ8600000

Fraction By Weight: 1-8%

OSHA PEL 5 MG BA/M3

ACGIH TLV: 2 MG BA/M3

SODIUM METASILICATE

CAS: 6834-92-0

RTECS: VV9275000

Fraction By Weight: <10%

LD50 LC50 Mixture:NOT GIVEN
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCT PRESENTS NO HAZARD AS
SHIPPED/STORED. ADVERSE EFFECTS OCCUR WHEN EXPOSED TO WELDING
FUMES. OVEREXPOSURE TO WELDING FUMES MAY RESULT IN IRRITATION OF
NOSE, THROAT & EYES. PROLONGED/REPEATED INH ALATION MAY BE HARMFUL
TO RESPIRATORY SYSTEM.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:DIZZINESS, NAUSEA, DRYNESS, IRRITATION IF
EXPOSED TO WELDING FUMES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH IMMEDIATELY W/WATER FOR 15 MINS. SKIN: WASH
THOROUGHLY W/PLENTY OF WATER & SOAP. INHALATION: REMOVE TO FRESH
AIR. ADMINISTER OXYGEN. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:NONFLAMMABLE. USE EXTINGUISHING MEDIA SUITABLE FOR
SURROUNDING FIRE.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:CONTAIN & PICK UP WASTE MATERIAL, PUT IN A
SEALED APPROVED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:ARCS, SPARKS & FLAME MAY BE A SOURCE
OF IGNITION OF COMBUSTIBLE MATERIALS. USE ONLY IN WELL VENTILATED
AREA. KEEP ONLY IN ORIGINAL LABELED CONTAINERS.
Other Precautions:ALWAYS READ & FOLLOW DIRECTIONS ON PRODUCT LABEL.
DON'T BREATHE DUSTS. AVOID PROLONGED CONTACT W/SKIN. DON'T TAKE
INTERNALLY. KEEP FROM FOOD, DRINK & ANIMAL FEEDS. KEEP OUT OF REACH
OF CHILDREN. FOR P ROFESSIONAL & INDUSTRIAL USE ONLY.

Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF STORAGE.
Ventilation:LOCAL/MECHANICAL VENTILATION: REQUIRED.
Protective Gloves:WELDERS LEATHER
Eye Protection:FACE SHIELD & COLORED ABSORPTIVE LENS.
Other Protective Equipment:WELDERS LEATHER APRON, SLEEVES & LEGGINGS.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
FUMES AND GASES FROM WELDING AND HIGH TEMPERATURE CUTTING CANNOT BE
CLASSIFIED SIMPLY. THE COMPOSITION AND QUANTITY OF BOTH DEPEND ON
THE ALLOY BEING WELDED, THE PROCESS, PROCEDURES AND ELECTRODES USE
. THE CONSTITUENTS OF THE FUME MAY BE DIFFERENT FROM THE
INGREDIENTS IN THE ELECTRODE.

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NOT GIVEN
Appearance and Odor:SOLID ROD

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:ARCS, SPARKS & FLAMES
Hazardous Decomposition Products:IRON, MANGANESE, SILICON, CHROMIUM,
NICKEL, AMORPHOUS SLAGS, CO, OZONE, METAL OXIDES/METAL FLUORIDES.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.