CCMSH - PLASTIDIP

  • MSDS: CCMSH
  • Manufacturer: PDI INC
  • Product Name: PLASTIDIP
  • National Stock Number: 5970-01-038-0593
Product Identification

Product ID:PLASTIDIP
MSDS Date:06/01/1997
FSC:5970
NIIN:01-038-0593
MSDS Number: CCMSH

Responsible Party
PDI INC
3760 FLOWERFIELD RD
MINNEAPOLIS, MN 55434
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 612-785-2156

Preparer: NOT GIVEN

Cage: 0B629

Contractor
PIONEER VALVE AND FITTING CO INC
BROOKLYN, NY 11206-3204 US

Telephone: 718-387-4724

Cage: 66200

Ingredients

VM & P NAPHTHA

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 37.0%


HEXANE (N-HEXANE) (CERCLA)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 18.5%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9596

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


TOLUENE (SARA 313) (CERCLA)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 14.8%

OSHA PEL 200 PPM; Z-2

ACGIH TLV: S, 50 PPM; 9596

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA 313) (CERCLA)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 3.7%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300STEL;9596

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


RESINS

Fraction By Weight: 26%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMTPOMS OF
OVEREXPOSURE. BRAIN AND NERVOUS SYSTEM DAMAGE (REFERRED TO AS
SOLVENTS OR PAINTERS SYNDROME). DRYING OR CRACKING SKIN.
Explanation of Carcinogenicity:PER MSDS:CARCINOGENCITY:NO. CONTAINS
TOLUENE-CHEM KNOWN TO STATE OF CA TO CAUSE BIRTH DEFECTS/OTHER
REPRODUCTIVE HARM.
Effects of Overexposure:HEADACHE, DIZZINESS, DROWSINESS, FATIGUE,
IRREGULAR HEARTBEAT, SKIN/EYE IRRIT.
Medical Cond Aggravated by Exposure:PRE-EXISTING HEART, LIVER, KIDNEY,
AND LUNG DISORDERS. TARGET
ORGANS:CNS,CVS,PNS,LIVER,KIDNEY,LUNGS,RESPIRATORY SYSTEM, SKIN.

First Aid

First Aid:INGEST:CONTACT PHYSICIAN OR POISON CONTROL IMMED.
INHAL:REMOVE TO FRESH AIR. ADMINISTER OXYGEN OR ARTIFICIAL
RESPIRATION IF NECESSARY. EYE:FLUSH W/LG AMTS OF WATER. IF IRRIT
PERSISTS CONTACT PHYSICIAN . SKIN:WASH W/SOAP/WATER.

Fire Fighting

Flash Point Method:PMCC
Flash Point:<2F,<-17C
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:1.0
Upper Limits:11.4
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS WITH A FULL
FACE PIECE OPERATED IN PRESSURE DEMAND OR OTHER POSITIVE PRESSURE
MODE.
Unusual Fire/Explosion Hazard:THIS MATERIAL IS FLAMMABLE AND MAY BE
IGNITED BY HEAT, SPARKS, FLAME OR STATIC ELECTRICITY.

Accidental Release

Spill Release Procedures:WIPE UP W/FLOOR ABSORBENT. TRANSFER TO HOOD.
PREVENT RUN-OFF TO SEWERS. ELIMINATE ALL SOURCES OF IGNITION.
VENTILATE TO MAINTAIN EXPO BELOW PELS. USE SAND OR TOHER MATERIAL
TO DAM OR CONTAIN SPILLS. I F LG SPILL NOTIFY APPROPRIATE
STATE/LOCAGENCIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM SPARKS,FLAME,HEAT
SOURCES.DO NOT STORE ABOVE 120F AND USE ADEQUATE VENTILATION.AVOID
INHAL OF VAPORS & CONTACT W/LIQ PRODUCT.
Other Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE. CONTAINERS
SHOULD BE DISPOSED OF IN AN ENVIRONMENTALLY SAFE MANNER IN
ACCORDANCE WITH GOVT REGULATIONS.

Exposure Controls

Respiratory Protection:DEPENDING ON AIRBORNE CONC USE A RESPIRATOR OR
GAS MASK W/APPROPRIATE NIOSH APPROVED CARTRIDGE & CANNISTER OR
SUPPLIED AIR EQPMT.
Ventilation:MAINTAIN PEL'S.LOC EXHAUST:SUPPLEMENTAL(IF NEEDED).
MECHANICAL(GEN):TO MAINTAIN EXPO BELOW PEL'S.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM SPLASH GOGG OR APPROVED EYE PROTECT
Other Protective Equipment:IMPERVIOUS CLOTHING/BOOTS AS NEEDED.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:151F,66C
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:118MM @20C
Vapor Density:2.5-4.1
Spec Gravity:0.92-0.94
pH:NP
Viscosity:NP
Evaporation Rate & Reference:6.8, BUTYL ACETATE=1
Solubility in Water:INSOLUBLE.
Appearance and Odor:VARIOUS COLORS, HONEY LIKE SUBSTANCE,
CHARACTERISTIC ODOR.
Percent Volatiles by Volume:74

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, OXIDIZING AGENTS, SELECTED AMINES W/ALKALI METALS
AND HALOGENS.
Stability Condition to Avoid:NONE. HMIS:HEAT, SPARKS, FLAME, STATIC
ELECTRICITY.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS.CONTAINS CHEMS SUBJ TO REPORTING
REQMTS OF SEC 313 TITLE III SARA/40CFR372:HEXANE,TOLUENE,METHYL
ETHYL KETONE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.