CCPVL - ULTRA FLUX A
- MSDS: CCPVL
- Manufacturer: MEMBREX INC
- Product Name: ULTRA FLUX A
- National Stock Number: 7930-00N073843
Product Identification
Product ID:ULTRA FLUX A
MSDS Date:07/28/1995
FSC:7930
NIIN:00N073843
MSDS Number: CCPVL
Responsible Party
FAIRFIELD, NJ 07004-3225
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 201-575-8388
Cage: 036G6
Contractor
Telephone: 201-575-8388
Cage: 036G6
Ingredients
NON-HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
PLACE IN LABELED WASTE CONTR FOR DISP. CLEAN UP
RTECS: 9999999ZZ
NIOSH APPRVD PRESS-DEMAND, SCBA IS RECOMMENDED.
RTECS: 9999999ZZ
YOUR SFTY PROFESSIONAL/INDUS HYGIENIST FOR
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES/SKIN: WEAK IRRITANT.
INGESTION: MAY CAUSE NAUSEA, VOMITING AND DIARRHEA. INHALATION: MAY
CAUSE IRRITATION OF MUCOUS MEMBRANES OF NOSE/MOUTH/THROAT. CHRONIC:
NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:CONT MD IN ALL CASES OF EXPOS. FIRST AIDERS SHOULD PROVIDE
FOR THEIR OWN SFTY PRIOR TO RENDERING ASSIST. EYES: WASH AFFECTED
EYES UNDER SLOWLY RUNNING WATER FOR AT LEAST 15 MIN. CONT MD IMMED.
SKIN: W ASH SKIN W/WATER FOR 15 MIN. REMOVE & ISOLATE ALL CONTAM
CLTHG & SHOES. INGEST: RINSE MOUTH & THROAT LIBERALLY IN WATER. DO
NOT INDUCE VOMIT. CONT MD IMMED. INHAL: REMOVE VICTIM TO COOL, (SUP
DAT)
Fire Fighting
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:NEVER ALLOW RUN-OFF TO ENTER SEWERS/WATERWAYS.
ACCORDING TO NFPA GUIDE, USE WATER SPRAY, DRY CHEM/CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIP . WATER/FOAM MAY CAUSE FROTHING. USE WATER TO COOL
FIRE-EXPOSED CONTRS. FIGHT FIRE FROM REMOTE LOCATION.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:NEVER ALLOW SPILLS TO ENTER SEWERS/WATERWAYS.
SOAK UP INERT INTO ABSORB MATL. DO NOT USE SAWDUST. COLLECT FOR
DISP IN PLASTIC RECOVERY DRUM. FLUSH RESIDUE W/PLENTY OF WATER TO
CHEM DRAIN. SPILL: STOP LEAKS. SOAK UP SML SPILLS W/ABSORB MATL&
(ING 2)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:MATERIAL SHOULD BE STORED IN THE
PROPERLY SEALED ORIGINAL CONTAINER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:IF OSHA-PEL/ACGIH-TLV ARE EXCEEDED, IT IS REC
THAT NIOSH APPRVD RESP BE USED. CONSULT W/YOUR INDUS HYGIENIST FOR
APPROP CARTIRDGE SELECTION & USE. FOR LGE SPILLS, ENTRY INTO LGE
TANKS, VESSELS/ENCLSD SML PLACES W/INADEQ VENT, A (ING 3)
Ventilation:GENERAL DILUTION IS REC. ADDITIONALLY, LOC EXHST VENT IS
REC WHERE VAPS, DUST, MISTS/ACROSIS MAY BE RELEASED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . CHEMICAL APRONS, BOOTS.
Work Hygienic Practices:IF CLTHG IS CONTAM, REMOVE CLTHG & THORO WASH
AFFECTED BODY AREA. LAUNDER CONTAM CLTHG BEFORE REUSE. CONSULT (ING
4)
Supplemental Safety and Health
FIRST AID PROC: UNCONTAM AREA. MONITOR PATIENT FOR RESP DISTRESS.
CAUTION: IF UNCON, HAVING TROUBLE BRTHG/IN CONVULSIONS, DO NOT
INDUCE VOMIT/GIVE WATER. ALWAYS CLEAN CONTAM CLTHG & GEAR PRIOR TO
REUS E. NEVER ADMIN ANYTHING TO AN UNCON PERS. WASTE DISP METH:
SPILLS MAY REQUIRE NOTIFICIATION TO FED, STATE & LOC AUTH.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.117
Solubility in Water:SOLUBLE
Appearance and Odor:CLEAR LIQUID, NO ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG BASES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:DILUTE W/LGE AMTS OF WATER & NEUTRALIZE W/DILUTE
BASE. DISCHARGE TO CHEM WASTE TREATMENT SYS. NOTE: DUE TO MORE
RESTRICTIVE WASTE DISP REGS, NEVER WASTE TREAT/DISPOSE OF MATL
UNTIL YOU CHECK YOUR APPR OP LOC, STATE, & FED REGS FOR REQS. (SUP
DAT)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.