CCRBG - SB-100, 12379

  • MSDS: CCRBG
  • Manufacturer: ALCO PRODUCTS INC
  • Product Name: SB-100, 12379
  • National Stock Number: 6850-00N014178
Product Identification

Product ID:SB-100, 12379
MSDS Date:03/02/1994
FSC:6850
NIIN:00N014178
MSDS Number: CCRBG

Responsible Party
ALCO PRODUCTS INC
13126 SATICOY ST
NORTH HOLLYWOOD, CA 91605
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 818-764-7700

Preparer: STEWART HOLYK

Cage: 0AXK7

Contractor
ALCO PRODUCTS INC
NORTH HOLLYWOOD, CA 91605 US

Telephone: 818-764-7700

Cage: 0AXK7

Ingredients

HYDROCHLORIC ACID (SARA 302/313) (CERCLA)

CAS: 7647-01-0

RTECS: MW4025000

Fraction By Weight: 23%

OSHA PEL 5 PPM, C

ACGIH TLV: 5 PPM, C

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: CONTACT OF THIS PRODUCT UPON THE
SKIN CAN CAUSE SEVERE IRRITATION AND/OR TISSUE DAMAGE. EYES:
CONTACT OF THIS PRODUCT UPON THE EYES CAN CAUSE SEVERE IRRITATION
AND/OR CHEMICAL BURNS OF THE EYES AND EYELIDS. INHALATION: FUMES
FROM THIS PRODUCT CAN CAUSE SEVERE IRRITATION OF THE NOSE, NASAL
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: PASSAGES AND LUNGS. INGESTION: WHEN
CONCENTRATED SOLUTIONS OF THIS PRODUCT ARE SWALLOWED. IT WILL CAUSE
CHEMICAL BURNS OF THE MUCOUS MEMBRANES IN THE MOUTH, ESOPHAGUS,
STOMACH AND INTESTINAL TRACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: FLUSH EXPOSED AREA FOR 15 MINUTES WITH WARM WATER.
CONSULT MD IMMEDIATELY. EYES: FLUSH EYES FOR 30 MINUTES WITH COOL
WATER. CONSULT MD IMMEDIATELY. INHAL: MOVE PATIENT TO CLEAN
ATMOSPHERE & ADMI NISTER OXYGEN IF IT IS AVAILABLE. CONSULT MD
IMMEDIATELY. INGEST: DO NOT INDUCE VOMITING. THIS PRODUCT IS AN
ACID; HAVE PATIENT DRINK LARGE QUANTITIES OF WATER OR MILK. CONSULT
MD IMMEDIATELY.

Fire Fighting

Flash Point:NONE
Extinguishing Media:WATER, SAND, CARBON DIOXIDE, DRY FOAM, HALON.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . THIS MATERIAL IS CONSIDERED A CORROSIVE AND CAN CAUSE
BURNS OF THE EXPOSED AREAS OF THE BODY.
Unusual Fire/Explosion Hazard:WHEN THIS MATERIAL IS HEATED, THE
CORROSIVE ACTION IS INCREASED GENERALLY. GREAT CARE SHOULD BE TAKEN
WHEN HANDLING HEATED CORROSIVE ACIDS.

Accidental Release

Spill Release Procedures:SMALL SPILL: FLUSH AREA WITH WATER TO AN
INDUSTRIAL SEWER LINE. LARGE SPILL: CONTAIN SPILL WITH DIKES OF
ABSORBENT MATERIALS SUCH AS CLAY, SAND OR VERMICULITE. COLLECT
MATERIAL AND DISPOSE OF MATERIAL IN A CERTIFIED CLASS ONE DISPOSAL
FACILITY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP THIS MATERIAL AWAY FROM HIGH HEAT
AND OBSERVE PROPER HOUSEKEEPING PROCEDURES. DO NOT MIX CHEMICALS
UNLESS INSTRUCTED BY QUALIFIED PERSONNEL.
Other Precautions:CHEMICALS CAN BE HAZARDOUS IF NOT RESPECTED. THE USE
OF PROPER EQUIPMENT & PROCEDURES FOR HANDLING CHEMICALS ARE NOT
ONLY OF BENEFIT FOR THEIR OBVIOUS USES, BUT CAN REDUCE THE
POSSIBILITY OF SERIOUS I NJURY AND TIME LOSS ACCIDENTS.

Exposure Controls

Respiratory Protection:WHEN USING THIS MATERIAL IN CONFINED SPACE, USE
OF NIOSH APPROVED PERSONAL RESPIRATORY PROTECTION IS RECOMMENDED.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (SUPDAT)
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
WHEN HANDLING CHEMICALS IN 55 GALLON CONTAINERS IT IS (SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH (CONCENTRATE): 0.061. EYE PROT: & FULL LENGTH FACESHIELD . OTHER
PROT EQUIP: RECOMMENDED THAT STEEL-TOED SHOES & APRON BE WORN.

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.08 (H*2O=1)
pH:SUPDAT
Evaporation Rate & Reference:1.06 (H*2O=1)
Solubility in Water:100% MISCIBLE
Appearance and Odor:MILKY WHITE LIQUID WITH AN ACIDIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:ALL HAZARDOUS MATLS MUST BE SOLIDIFIED &
DISPOSED OF IN AN EPA APPRVD CLASS ONE FACILITY. WHEN DISPOSING OF
CHEMS, CONTACT LOCAL, STATE & FEDERAL ENVIRONMENTAL AGENCIES TO
FULLY UNDERSTAND THE NECESSA RY REGS GOVERNING THE DISPOSAL OF CHEM
WASTES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.