CCRFC - TIP TINNER
- MSDS: CCRFC
- Manufacturer: R AND R LOTION
- Product Name: TIP TINNER
- National Stock Number: 6850-00N073857
Product Identification
Product ID:TIP TINNER
MSDS Date:08/16/1995
FSC:6850
NIIN:00N073857
MSDS Number: CCRFC
Responsible Party
TEMPE, AZ 85281
US
Emergency Phone: 602-968-7787
Info Phone: 602-968-7787
Cage: GO676
Contractor
Telephone: 602-968-7787
Cage: 0KDZ6
Ingredients
INSOLUBLE
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 50%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
SOLUBLE
CAS: 7783-28-0
Fraction By Weight: 50%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: PROLONGED OR REPEATED SKIN
CONTACT CAN RESULT IN A RASH. FUMES EMITTED DURING USE CAN CAUSE
HEADACHE AND IRRITATION OF MUCOUS MEMBRANES IN THE EYES AND
RESPIRATORY SYSTEM. CHRONIC OVEREXPOSURE TO TIN CAN RESULT IN
BENIGN PNEUMOCONIOSIS (STANNOIS).
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:CHEMICAL HYPERSENSITIVITY, ASTHMA
AND OTHER RESPIRATORY CONDITIONS.
First Aid
First Aid:NORMAL HYGIENE AND FIRST AID PROCEDURES. SKIN: WASH WITH SOAP
AND WATER. EYES: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES. INHALATION: REMOVE VICTIM TO FRESH AIR. INGESTION: CALL MD
IMMEDIATEL Y .
Fire Fighting
Extinguishing Media:DRY CHEMICAL OR EQUIVALENT TYPE SUITABLE FOR METAL
TYPE FIRES.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:SCOOP OR SWEEP UP AND DISCARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID EYE AND SKIN CONTACT. AVOID
BREATHING FUMES GENERATED DURING USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:A NIOSH APPROVED CARTRIDGE TYPE RESPIRATOR
SHOULD BE WORN.
Ventilation:LOC EXHST: PROVIDE ADEQ VENT TO MEET TLV REQUIREMENTS.
SPECIAL: REMOVE SMOKE FROM BREATHING ZONE.
Protective Gloves:PLASTIC OR RUBBER GLOVES RECOMMENDED.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:2260F,1238C
Melt/Freeze Pt:M.P/F.P Text:450F,232C
Vapor Pres:<0.01
Spec Gravity:2.0 (H*2O=1)
Solubility in Water:SEE INGREDIENTS
Appearance and Odor:SILVER PASTE, LOW ODOR WHEN HEATED > 300F (150C)
Stability
Stability Indicator/Materials to Avoid:YES
CHLORINE, TURPENTINE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AT TEMPERATURES ABOVE THE MELTING
POINT, METAL OXIDE FUMES MAY BE EVOLVED.
Disposal
Waste Disposal Methods:ACCORDING TO LOCAL REGULATIONS, TIN MAY HAVE
VALUE OF RECYCLE BASIS IF DISPOSED OF IN A PERMITTED DISPOSAL SITE
IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL DISPOSAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.