Product ID:E7083
MSDS Date:08/14/1990
FSC:3439
NIIN:00N074983
MSDS Number: CCTJN

THERMACOTE WELCO

1051 YORK RD
KINGS MOUNTAIN, NC 28086
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 704-739-6424

Cage: OAES5

THERMACOTE-WELCO CO SUB OF FOSTER WHEELER CORP

828 KINGS MOUNTAIN, NC 28086 US

Telephone: (704) 739-6421

Cage: 24559

CARBON BLACK; (CARBON)

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 0.50%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9495

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 2.50%

OSHA PEL C 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9495

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 1.50%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9495

COPPER (SARA 313) (CERCLA)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 0.50%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2 MG/M3 FUME; 9495

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0.75%

OSHA PEL 10 PPM.

ACGIH TLV: 10 PPM.

ALUMINUM (SARA 313)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 0.50%

OSHA PEL 15 MG/M3 DUST

ACGIH TLV: 10 MG/M3 DUST; 9495

TITANIUM

CAS: 7440-32-6

RTECS: XR1700000

Fraction By Weight: 0.50%

OSHA PEL N/K

ACGIH TLV: 10MG/M3 TOTAL (MFR)

ZIRCONIUM

CAS: 7440-67-7

RTECS: ZH7070000

Fraction By Weight: 0.50%

OSHA PEL 5 MG ZR/M3

ACGIH TLV: 5 MG ZR/M3

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: BAL

OSHA PEL N/K

ACGIH TLV: 5 MG/M3 FE203FE(MFR)

PERCENT & FORM FROM INGRED LISTED IN SECTION II.

RTECS: 9999999ZZ

ARE IMPORTANT. THE CONC OF GIVEN FUME/GAS COMPONENT

RTECS: 9999999ZZ

IN ELECTRODE. NEW CMPDS NOT IN ELECTRODE MAY FORM,

RTECS: 9999999ZZ

FROM VOLATILIZATION, RXN, OXIDATION OF MATL IN

RTECS: 9999999ZZ

REASONABLY EXPECTED FUME CONSTITUENTS OF PROD COULD

RTECS: 9999999ZZ

OXIDES OF MANGANESE & SILICON & ALUMINUM. GASEOUS

RTECS: 9999999ZZ

NITROGEN OXIDES MAY BE FORMED BY RADIA FROM ARC, &

RTECS: 9999999ZZ

COMPOSITION & QTY OF FUMES & GASES TO WHICH WORKERS

RTECS: 9999999ZZ

HELMET/IN WORKING ZONE. SEE AWS F1.1 & AWS

RTECS: 9999999ZZ

AVAILABLE FROM THE AM. WELDING SOCIETY. SEE AWS

RTECS: 9999999ZZ

AM. STANDARD 249.1-1983. SAFETY IN WELDING

RTECS: 9999999ZZ

PRACTICES IN WELDING AND CUTTING.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ELECTRIC ARC WELDING MAY CREATE THE
FOLLOWING: FUMES AND GASES CAN BE DANGEROUS TO YOUR HEALTH. ARC
RAYS CAN INJURE EYES AND BURN SKIN. ELECTRIC SHOCK CAN KILL.
Explanation of Carcinogenicity:CARBON BLACK:IARC MONOGRAPHS ON THE
EVALUATION OF CARCINOGENIC RISK OF CHEMS TO MAN, VOL 65, PG 24-27,
1995:GROUP 2B.
Effects of Overexposure:SHORT TERM-DIZZINESS, NAUSEA, DRYNESS &
IRRITATION OF NOSE, THROAT, EYES, CHEST TIGHTNESS, FEVER, ALLERGIC
REACTION. OVEREXPOSURE TO FUMES-SIDEROSIS POSSIBLE. MAY AFFECT
PLUMONARY FUNCTION.
Medical Cond Aggravated by Exposure:SEE SIGNS & SYMPTOMS OF EXPOSURE.

First Aid:INGEST: CALL MD IMMEDIATELY . EYES: IMMEDIATELY FLUSH WITH
POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD
. SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL MD . I NHAL:
REMOVE TO FRESH AIR, OBTAIN MEDICAL ATTENTION. EMPLOY FIRST AID
TECHNIQUES RECOMMENDED BY AM. RED CROSS.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WELDING ARC & SPARKS CAN IGNITE COMBUSTS & FLAM. REFER TO AM.
NATIONAL STANDARD Z49.1 FOR FIRE PVNT (SUPDAT)
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NOT APPLICABLE.
Other Precautions:NOT APPLICABLE.

Respiratory Protection:MAKE SURE INHALED AIR DOES NOT CONTAIN FUME
CONSITUENTS ABOVE PERMISSIBLE EXPOSURE LEVELS. NIOSH APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:SEE RESPIRATORY PROTECTION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
OTHER PREC FOR ADDNL SAFETY INFO ON WELDING & CUTTING, SEE (ING 20)
Work Hygienic Practices:NOT APPLICABLE.
Supplemental Safety and Health
FIRE FIGHT PROC:DURING THE USE OF WELDING & ALLIED PROCS. HAZ DECOMP
PROD:BEING USED. OTHER FACTORS INCL COATINGS ON THE METAL BEING
WELDED (PAINT, PLATING/GALVANIZING). NUMBER OF WELDERS & VOL OF WOR
K AREA AS PRESENCE OF CONTAMS IN ATM. WHEN ELECTRODE IS CONSUMED
FUME & GAS DECOMP PRODS GENERATED ARE DIFF IN (ING 10)

Appearance and Odor:SOLID WIRE OR ROD.

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:THE COMPOSITION & QUALITY OF WELDING
FUMES & GASES ARE DEPENDENT UPON METAL BEING WELDED, PROCESS &
ELECTRODE (SUPDAT)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT, DISCARD PRODUCT RESIDUE, DISPOSABLE CONTAINER OR LINER
IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE WITH
FEDERAL, STATE AND LOC AL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.