Product ID:DCC-4163 CONCEPT ACRYLIC URETHANE
MSDS Date:05/18/1993
FSC:8010
NIIN:00F052826
MSDS Number: CDCDM

PPG INDUSTRIES INC COATINGS & RESINS GROUP

4325 ROSANNA DR
ALLISON PARK, PA 15101-5000
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

ACRYLIC RESIN

Fraction By Weight: 10-15%

TITANIUM DIOXIDE, TITANIUM OXIDE (SUSPECTED ANIMAL

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 30-35%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

PHTHALOCYANINE GREEN PIGMENT

CAS: 14302-13-7

RTECS: GL7500000

Fraction By Weight: 10-15%

NICKEL,BIS(3-((4-CHLOROPHENYL)AZO)-2,4(1H, 3H)-

CAS: 51931-46-5

Fraction By Weight: 5-10%

BUTANOL, N-BUTYL ALCOHOL, PROPYL CARBINOL, BUTYL ALCOHOL

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 2-5%

OSHA PEL 100 PPM

ACGIH TLV: C 152 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *96-4*

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 25-30%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SOLVENT NAPHTHA, PETROLEUM, LIGHT AROMATIC, HIGH FLASH

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 2-5%

PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,

CAS: 108-65-6

RTECS: AI8925000

Fraction By Weight: 10-15%

ETHYLENE GLYCOL MONOBUTYL ETHER ACETATE, BUTYL CELLOSOLVE

CAS: 112-07-2

RTECS: KJ8925000

Fraction By Weight: 2-5%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM

ETHYL 3-ETHOXYPROPIONATE, PROPANOIC ACID, 3-ETHOXY-, ETHYL

CAS: 763-69-9

RTECS: UF3325000

Fraction By Weight: 5-10%

BUTYL ACETATE (N-BUTYL ACETATE) *96-4*

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 20-25%

OSHA PEL 710 MG/CUM

ACGIH TLV: 713 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 35-40%

NICKEL COMPOUNDS AS NI

Fraction By Weight: 5-10%

GLYCOL ETHERS

Fraction By Weight: 2-5%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES: SEVERE
IRRITATION. SKIN: MODERATE IRRITATION & MAY BE ABSORBED.
INHALATION: HARMFUL, IRRITATES EYES, NOSE & THROAT. IRRITATION OF
THE RESPIRATORY SYSTEM, PERMANENT BRAI N DAMAGE & NERVOUS SYSTEM
DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, WATERING EYES, HEADACHES, NAUSEA,
DIZZINESS, LOSS OF COORDINATION, REDNESS, ITCHING, BURNING
SENSATION, VISUAL DISTURBANCES, DRYNESS, CRACKING, BURNING,
SWELLING.

First Aid:INGESTION: GIVE 1/2 GLASSES OF WATER. DON'T INDUCE VOMITING.
EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 30 MINS. SKIN: FLUSH
W/PLENTY OF WATER, FOLLOWED BY WATERLESS HAND CLEANER, SOAP &
WATER. INHALA TION: REMOVE TO FRESH AIR. GIVE CPR & OTHER
SUPPORTIVE MEASURES AS REQUIRED. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Flash Point Method:PMCC
Flash Point:72F
Lower Limits:1.2
Extinguishing Media:CO2, DRY CHEMICAL, UNIVERSAL AQUEOUS FILM FORMING
FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, BUT MAY BE
USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG NOZZLES ARE
PREFERABLE. FIRE-FIGHTERS SHOULD WEAR SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DON'T APPLY ON HOT SURFACES. TOXIC GASES
MAY FORM WHEN CONTACTED BY FLAME/HOT SURFACES.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED W/PROPER PROTECTIVE EQUIPMENT SHOULD BE PERMITTED. REMOVE
SOURCES OF IGNITION. TAKE UP W/SAWDUST, VERMICULITE/OTHER ABSORBENT
MATERIAL & PLACE INTO CONTAINERS FOR DISPOSAL.

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE AMOUNTS
IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE. KEEP CONTAINERS
TIGHTLY CLOSED. ISOLATE FROM IGNITION SOURCES.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES. INTENTIONAL MISUSE
BY DELIBERATELY CONCENTRATING & INHALING THE CONTENTS CAN BE
HARMFUL/FATAL.

Respiratory Protection:OVEREXPOSURE TO VAPORS MAY BE PREVENTED BY
USING, VAPOR EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPROVED (TC-23C)
AIR PURIFYING/AIR SUPPLIED (TC-19C) RESPIRATORS MAY ALSO REDUCE
EXPOSURE.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST: KEEP CONCENTRATIONS <
LIMITS. REMOVE DECOMPOSTION PRODUCTS DURING WELDING/FLAME CUTTING.
Protective Gloves:NITRILE RUBBER/NEOPRENE RUBBER
Eye Protection:CHEMICAL TYPE SPLASH GOGGLES
Other Protective Equipment:FULL FACE SHIELD, PROTECTIVE CLOTHING,
IMPERMEABLE APRON.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE.
Supplemental Safety and Health
BOILING POINT: 179.6-384.8F.

Boiling Pt:B.P. Text:(SEE SUPP)
Vapor Pres:8
Vapor Density:>1
Spec Gravity:1-1.4
Evaporation Rate & Reference:(BUO AC = 100): 89
Solubility in Water:INCOMPLETE
Appearance and Odor:VISCOUS LIQUID W/A CHARACTERISTIC ODOR
Percent Volatiles by Volume:50-65

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN
FLAMES, HOT SURFACES.
Hazardous Decomposition Products:CO.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY. UN1283.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.