Product ID:EUTECSOL 808 NEUTRAL
MSDS Date:04/03/1992
FSC:3439
NIIN:00N036312
MSDS Number: CDMRC

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-2799
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

EXPECTED CONSTITUENTS OF FUME MAY INCL COMPLEX

RTECS: 9999999ZZ

METAL OXIDES, CARBON & SILICA. GASEOUS RXNS PRODS

RTECS: 9999999ZZ

NITROGEN OXIDES & CERTAIN INERT GASES USED AS

RTECS: 9999999ZZ

FUMES & GASES IN WHICH WORKERS ARE EXPOS IS TO TAKE

RTECS: 9999999ZZ

BRTHG ZONE. SEE ANSI/AWS F1.1 AVAIL FROM AWS. P.O.

RTECS: 9999999ZZ

"EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT

RTECS: 9999999ZZ

ADVICE ON SAMPLING.

RTECS: 9999999ZZ

DIMETHYL AMMONIUM CHLORIDE; (DIMETHYLAMINE HYDROCHLORIDE)

CAS: 506-59-2

RTECS: IQ0220000

OSHA PEL N/K

ACGIH TLV: N/K

HARMFUL IF SWALLOWED. SKIN CONT &

RTECS: 9999999ZZ

HIGH CONCS MAY PRDCE HDCHS, NAUS, WEAK, DROW, VOMIT,

RTECS: 9999999ZZ

RPTD EXPOS CAN CAUSE DIGEST DISTURBS & FAILURE OF

RTECS: 9999999ZZ

IRRITATION OR BURNS OF EYES & SKIN. INGESTION MAY

RTECS: 9999999ZZ

FUMES, GASES & DUSTS GIVEN OFF DURING

RTECS: 9999999ZZ

SPRAY PROCESSES CANNOT BE CLASSIFIED SIMPLY.

RTECS: 9999999ZZ

WELDED, PROCESS, PROCS & ELECTRODES/OTHER

RTECS: 9999999ZZ

& QTY OF FUMES, GASES & DUSTS THAT WORKERS MAY BE

PLATING), NUMBER OF WORKERS & VOL OF WORK SPACE,

RTECS: 9999999ZZ

RESPECT TO FUMES GENERATED, AS WELL AS PRESENCE OF

RTECS: 9999999ZZ

FROM CLEANSING & DEGREASING ACTIVITIES). DURING

RTECS: 9999999ZZ

DECOMP PRODS GENERATED ARE DIFF IN PERCENT & FORM

RTECS: 9999999ZZ

THOSE ORIGINATING FROM VOLATIZATION, RXN/OXIDATION

RTECS: 9999999ZZ

ETHYL ALCOHOL; (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM

ROSIN ACID; (GUM ROSIN)

CAS: 8050-09-7

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

ACETIC ACID, ETHYL ESTER; (ETHYL ACETATE) (CERCLA)

CAS: 141-78-6

RTECS: AH5425000

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

METHANOL; (METHYL ALCOHOL) (SARA 313) (CERCLA)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 1-5%

OSHA PEL 200 PPM, S

ACGIH TLV: 200 PPM;250 STEL, S

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:FUMES ASSOC W/HEATING, WELDING,
BRAZING, SOLDERING/CUTTING METALS CAN BE DANGEROUS TO YOUR HLTH &
OVEREXP CAN CAUSE LUNG DMG &/OR OTHER ORG DMG. EYE/SKIN CONT:ARC
RAYS & ULTRAVIOLET LIGHT CAN IN JURE EYES & BURN SKIN. LIQS USED IN
FLUXES MAY CAUSE IRRIT/POSS CHEM BURNS. ELEC SHOCK CAN KILL. (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:INGEST:DANGER! MAY BE HARMFUL/FATAL IF
SWALLOWED. ING 1:HIGH VAP CONCS MAY CAUSE UPPER RESP TRACT IRRIT &
NARCOS. LIQ & VAP CONT CAN CAUSE EYE IRRIT. ING 3:CAN AFFECT BODY
IF INHALED, INGESTE D/IF IT COMES IN CONT W/EYES OR SKIN. SHORT
TERM OVEREXP MAY CAUSE IRRIT OF EYES, NOSE/THROAT. SEV OVEREXP MAY
(SUPDAT)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:INHAL:MOVE VICTIM TO FRESH AIR SOURCE. CONTACT MD & ADVISE ON
INGS. SKIN:THOROUGHLY WASH HANDS OR AFFECTED AREAS W/SOAP & WATER
TO REMOVE ALL RESIDUE. IF RASH OR BURN DEVELOPS, CONSULT MD.
EYES:THOROU GHLY FLUSH W/WATER FOR AT LEAST 15 MINUTES TO REMOVE TO
REMOVE ALL RESIDUE. OBTAIN PROMPT MEDICAL ADVISE FOR CHEMICAL AIDS.
ADVISE MD OF INGS. INGEST:CALL MD &/OR LOCAL POIS CTL CTR. ADVISE
OF INGS.

Extinguishing Media:CO*2, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:REFER TO ANSI Z49.1 FOR FIRE PREVENTION
DURING USE OF WELDING & ALLIED PROCESSES. ALL E & C FLUXES ARE
NONFLAMM & ARE USED AS DEOXIDIZERS DURING (SUPP DATA)

Spill Release Procedures:IF A FLUX IS ACCIDENTALLY SPILLED, CONTAIN
SPILL, ABSORB & SWEEP UP. FLUSH AREA W/WATER TO APPRVD CHEM DRAIN.
USE APPROP MEASURES TO KEEP AIRBORNE DUST LEVELS CONTAINED I/A/W
EXPOS LEVELS OF INGS. SEE SECTION 8 FOR PROPER SAFE HNDLG &
STORAGE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:TRAIN WELDER TO KEEP HIS/HER FACE AWAY
FROM FUME/DUST PLUME. PLEASE READ & UNDERSTAND PRODUCT LABEL
INFORMATION FOR PROPER PROCEDURES & USE.
Other Precautions:WARNING - FLAMMABLE! KEEP AWAY FROM SPARKS, FLAMES &
HEAT. USE ADEQUATE VENTILATION.

Respiratory Protection:IF WORK STATION IS NOT PROPERLY VENTILATED TO
EXHAUST ALL FUMES, VAPORS & DUSTS BELOW RECOMMENDED EXPOSURE
LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOCAL EXHAUST AT WORK SITE TO KEEP
ALL FUMES & DUST FROM WORKER'S BREATHING ZONE & GENERAL AREA.
Protective Gloves:CHEMICAL & OIL IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS &(SUPDAT)
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
SHOWER . USE FULL PROT EQUIP NORMALLY USED IN WELDING/BRAZING (SUPP
DATA)
Work Hygienic Practices:ALWAYS WASH HANDS THOROUGHLY AFTER USE. DO NOT
WEAR CONTACT LENSES.
Supplemental Safety and Health
MATLS TO AVOID:GAS IN FIRE. EYE PROT:FULL LGTH FCSHLD W/FILTER LENS
REC FOR SPECIFIC WELDING OPERATION. OTHER PROT EQUIP:OPERATIONS SO
AS TO PVNT SKIN CONT. EXPLO HAZ:WELDING, BRAZING/SOLDERING
OPERATIONS. CANS UNDER PRESS & FLAMMS MAY EXPLODE. EFTS OF
OVEREXP:CAUSE WEAK, DROW & UNCON. PRLNG SKIN CONT MAY(ING 6)

Appearance and Odor:DARK BROWN LIQUID.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, CYANIDES, SULFIDES. CHLORIDE CMPDS WILL FORM STRONG ACIDS
IN PRESENCE OF WATER & MAY GIVE OFF HCL (SUPDAT)
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:IN PRESENCE OF WATER & HEAT, FLUXES
MAY GIVE OFF HCL & HF. SOME FLUXES MAY GIVE OFF PHOSGENE & CHLORINE
GASES. (ING 10)

Waste Disposal Methods:DISPOSE OF IN AN ENVIRONMENTALLY SENSITIVE
MANNER I/A/W FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.