CDQZX - F0512 INT/EXT ACRYLIC DEEP TINT BASE
- MSDS: CDQZX
- Manufacturer: DEL PAINT CORP
- Product Name: F0512 INT/EXT ACRYLIC DEEP TINT BASE
- National Stock Number: 8010-00F053071
Product Identification
Product ID:F0512 INT/EXT ACRYLIC DEEP TINT BASE
MSDS Date:10/01/1994
FSC:8010
NIIN:00F053071
MSDS Number: CDQZX
Responsible Party
OKLAHOMA CITY, OK 73106-6699
US
Emergency Phone: 405-692-7269/405-672-1431
Info Phone: 405-672-1431/800-866-6823
Preparer: ONEY FLEMING
Cage: EO523
Contractor
Telephone: 405-672-1431
Cage: 39934
Ingredients
NON-HAZARDOUS INGREDIENTS
Fraction By Weight: 98.45%
ETHYLENE GLYCOL, GLYCOL *96-4*
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 1.55%
OSHA PEL 50 PPM
ACGIH TLV: C 127 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
83.0 GM/L; (0.34 LBS/GAL)
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CAN CAUSE IRRITATION OF
RESPIRATORY PASSAGES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:NAUSEA, IRRITATION
Medical Cond Aggravated by Exposure:NONE
First Aid
First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH
THOROUGHLY W/SOAP & WATER. INGESTION: GIVE 2 GLASSES OF WATER TO
DRINK. SKIN: WASH THOROUGHLY W/SOAP & WATER. OBTAIN MEDICAL
ATTENTION IN A LL CASES.
Fire Fighting
Flash Point Method:SCC
Flash Point:250F
Lower Limits:3.2
Upper Limits:15.3
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:THIS PRODUCT WILL NOT BURN UNTIL THE
WATER HAS EVAPORATED FOR RESIDUAL SOLID. AUTOIGNITION TEMP: 250F.
Accidental Release
Spill Release Procedures:KEEP SPECTATORS AWAY. FLOOR MAY BE SLIPPERY,
USE CARE TO AVOID FALLING. CONTAIN W/INERT MATERIALS: SAND/EARTH.
TRANSFER LIQUIDS & SOLID MATERIAL TO SEPARATE SUITABLE CONTAINERS
FOR RECOVERY/DISPOSAL.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. KEEP AWAY FROM
CHILDREN.
Other Precautions:DON'T TAKE INTERNALLY.
Exposure Controls
Respiratory Protection:APPROVED MECHANICAL FILTER RESPIRATOR TO REMOVE
SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING SPRAY APPLICATION.
Ventilation:NORMAL, SUCH AS FAN.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:EYE WASH STATION.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212-464F
Melt/Freeze Pt:M.P/F.P Text:32F
Decomp Temp:Decomp Text:212F
Vapor Pres:NONE
Vapor Density:>1
Spec Gravity:1.41
pH:8-9
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SLIGHT
Appearance and Odor:WHITE LIQUID W/SLIGHT ODOR
Percent Volatiles by Volume:54.69
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FREEZING
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:KEEP CLEANING RUN OFF OUT OF MUNICIPAL SEWERS &
OPEN BODIES OF WATER. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.