Product ID:S-7732 WHITE LEAD FREE ISLE MARKING PAINT
MSDS Date:06/14/1995
FSC:8010
NIIN:00F053498
MSDS Number: CDRNX

DEL PAINT CORP

3105 E RENO AVE
OKLAHOMA CITY, OK 73106-6699
US

Emergency Phone: 405-692-7269/405-672-1431

Info Phone: 405-672-1431/800-866-6823

Preparer: ONEY FLEMING

Cage: EO523

DEL PAINT MFG

OKLAHOMA CITY, OK 73117 US

Telephone: 405-672-1431

Cage: 39934

2-PROPANOL-1-BUTOXY, PROPYLENE GLYCOL N-BUTYL ETHER *96-4*

CAS: 5131-66-8

RTECS: UA7700000

Fraction By Weight: 3.44%

1-PROPANOL, 2-BUTOXY

CAS: 15821-83-7

2-((2-ETHYLHEXYL)OXY), ETHYLENE GLYCOL, 2-ETHYL HEXYL ETHER

CAS: 1559-35-9

RTECS: KK9625000

NON-HAZARDOUS INGREDIENTS

Fraction By Weight: 95.99%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CAN CAUSE IRRITATION OF
NOSE, THROAT & LUNGS/IRRITATION OF RESPIRATORY PASSAGES. EYES/SKIN:
SLIGHT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:HEADACHES, NAUSEA, IRRITATION.
Medical Cond Aggravated by Exposure:PRE-EXISTING LUNG DISEASE.

First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH
THOROUGHLY W/SOAP & WATER. INGESTION: GIVE 2 GLASSES OF WATER TO
DRINK. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:SCC
Flash Point:241F
Lower Limits:1.1
Upper Limits:8.4
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR SCBA (PRESSURE DEMAND MSHA/NIOSH
APPROVED/EQUIVALENT)& FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER >212F. POLYMER FILM
CAN BURN. AUTOIGNITION TEMP: 216F.

Spill Release Procedures:KEEP SPECTATORS AWAY. FLOOR MAY BE SLIPPERY,
USE CARE TO AVOID FALLING. CONTAIN W/INERT MATERIALS. TRANSFER
LIQUIDS & SOLID DIKING MATERIAL TO SEPARATE SUITABLE CONTAINERS FOR
RECOVERY/DISPOSAL.
Neutralizing Agent:NONE

Handling and Storage Precautions:KEEP FROM FREEZING.
Other Precautions:DON'T TAKE INTERNALLY. KEEP AWAY FROM CHILDREN.

Respiratory Protection:DURING SPRAY APPLICATION, APPROVED MECHANICAL
FILTER RESPIRATOR TO REMOVE SOLID AIRBORNE PARTICLES OF OVER SPRAY.
Ventilation:NORMAL, SUCH AS FAN.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:EYEWASH STATION.
Supplemental Safety and Health

Boiling Pt:B.P. Text:212F-455F
Melt/Freeze Pt:M.P/F.P Text:32F
Decomp Temp:Decomp Text:212F
Vapor Pres:NONE
Vapor Density:>1
Spec Gravity:1.02
pH:8-9
VOC Grams/Liter:.44
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETE
Appearance and Odor:WHITE LIQUID W/SLIGHT ODOR
Percent Volatiles by Volume:67.36

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FREEZING.
Hazardous Decomposition Products:THERMAL: ACRYLIC MONOMERS.

Waste Disposal Methods:KEEP AREA & CLEANING RUN OFF OUT OF MUNICIPAL
SEWERS & OPEN BODIES OF WATER. DISPOSE OF IAW/FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.