Product ID:TONER, 5210/7201
MSDS Date:03/05/1989
FSC:6850
NIIN:00N077878
MSDS Number: CDVBG

OKIDATA

532 FELLOWSHIP RD
MOUNT LAUREL, NJ 08054
US

Emergency Phone: 609-235-2600

Info Phone: 609-235-2600

Cage: 25405

OKIDATA

MOUNT LAUREL, NJ 08054 US

Telephone: 609-235-2600

Cage: 25405

STYRENE POLYMER; (INGREDIENTS 1-4 COMPOSE 81.5% OF PRODUCT

CAS: 9003-53-6

RTECS: WL6475000

OSHA PEL N/K

ACGIH TLV: N/K

POLYBUTYLACRYLATE

CAS: 9003-49-0

OSHA PEL N/K

ACGIH TLV: N/K

POLYETHYLENE

CAS: 9002-88-4

RTECS: TQ3325000

OSHA PEL N/K

ACGIH TLV: N/K

C.I. SOLVENT YELLOW 21

CAS: 41741-86-0

OSHA PEL N/K

ACGIH TLV: N/K

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 15%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

INORGANIC RESIDUE COMPOSED OF SMALL AMOUNTS OF INGREDIENTS

Fraction By Weight: 3.5%

OSHA PEL N/K

ACGIH TLV: N/K

IRON OXIDE

CAS: 1317-61-9

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

SILICON OXIDE

OSHA PEL N/K

ACGIH TLV: N/K

CHROMIUM OXIDE (CR II)

CAS: 12018-00-7

OSHA PEL N/K

ACGIH TLV: N/K

SODIUM OXIDE

CAS: 1313-59-3

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:POLYSTYRENE & POLYETHYLENE:
SUBCUTANEOUSLY IMPLANTED POLYSTYRENE & POLYETHYLENE HAVE RSLTD IN
TUMOR FORMATION IN RATS. POLYBUTYLACRYLATE: EMBEDDED ACRYLIC FIBERS
HAVE BEEN ASSOC W/CAUSING RESP EFTS & GRANULOMA-LIKE SKIN CHANGES.
C.I. SOLVENT YELLOW 21: OVEREXP TO CERTAIN TYPES OF AZO DYES HAS
BEEN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CARBON BLACK: IARC MONOGRAPHS ON THE
EVALUATION OF CARCIN RISK OF CHEMS TO MAN, VOL 65, PG 24-27,
1995:GROUP 2B.
Effects of Overexposure:HLTH HAZ: ASSOC W/CAUSING TUMORS IN RODENTS.
CARBON BLACK: OVEREXP IS ASSOC W/IRRIT OF SKIN, EYES & RESP TRACT
WHICH MAY PROGRESS TO CONJUNCTIVITIS, CORNEAL HYPOLASIA, ECZEMA,
DERMATITIS, BRONCHITIS & POSS LUNG CANCER. TOX POTNTL OF
CARBONBLACK MAY BE GREATER IN THE PRESENCE OF POLYCYCLIC AROMATIC
HYDROCARBONS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DILUTE BY GIVING TWO GLASSES OF WATER & INDUCE
VOMITING BY PLACING FINGER TO BACK OF THROAT OR BY USING SYRUP OF
IPECAC (FOLLOW MFR'S INSTRUCTIONS). NEVER INDUCE VOMITING IN
UNCONSCIOUS PERSON . INHAL: REMOVE TO FRESH AIR. SKIN: WASH
THOROUGHLY WITH LARGE QUANTITIES OF SOAP & WATER. EYES: FLUSH WITH
LARGE QUANTITIES OF WATER FOR AT LEAST 15 MINUTES.

Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:SEE SECTION ON HAZARDOUS DECOMPOSITION
PRODUCTS.

Spill Release Procedures:MATERIAL SHOULD FIRST BE WET DOWN TO PREVENT
DUSTING, THEN SCOOPED UP FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PROTECT FROM HIGH HEAT. AVOID MAKING
DUST.
Other Precautions:NONE.

Respiratory Protection:NOT NORMALLY REQUIRED. IN CASE OF LARGE SPILLS,
USE APPROPRIATE NIOSH APPROVED HEPA RESPIRATOR FOR PROTECTION
DURING CLEANUP.
Ventilation:OUTSIDE OF NORMAL VENTILATION NOT NORMALLY REQUIRED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE.
Supplemental Safety and Health
HAZ DECOMP PRODS: MONOXIDE, ACROLEIN &/OR HYDROGEN CYANIDE.

Melt/Freeze Pt:M.P/F.P Text:>200F,>93C
Spec Gravity:1.8-2.2(H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK COLORED FINE PARTICLES; PRACTICALLY ODORLESS.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HIGH HEAT (>400F).
Hazardous Decomposition Products:THERMAL DECOMPOSITION OF POLYSTYRENE,
POLYETHYLENE AND POLYBUTYLACRYLATE MAY RSLT IN THE RELEASE OF
CARBON (SUPDAT)

Waste Disposal Methods:FOLLOW APPROPRIATE FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.