CDWNB - 01958 TEXCLAD 2
- MSDS: CDWNB
- Manufacturer: TEXACO LUBRICANTS CO
- Product Name: 01958 TEXCLAD 2
- National Stock Number: 9150-00N060847
Product Identification
Product ID:01958 TEXCLAD 2
MSDS Date:01/30/1995
FSC:9150
NIIN:00N060847
MSDS Number: CDWNB
Responsible Party
US
Emergency Phone: 914-831-3400;800-424-9300(CHEMTREC)
Info Phone: 914-838-7204
Cage: OTTJ3
Contractor
Telephone: 713-650-5206
Cage: 2R503
Ingredients
SOLVENT DEASPHALTED RESIDUAL PETROLEUM OIL; (SEVERELY
CAS: 64741-95-3
Fraction By Weight: <49.99%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
20-34.99.
CAS: 7440-44-0
RTECS: FF5250100
Fraction By Weight: <34.99%.
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST
10-19.99.
CAS: 8052-42-4
RTECS: CI9900000
Fraction By Weight: <19.99%
OSHA PEL N/K
ACGIH TLV: 5 MG/M3 (FUME)
10-19.99.
CAS: 64755-01-7
Fraction By Weight: <19.99%
OSHA PEL N/K
ACGIH TLV: N/K
MOLYBDENUM SULFIDE; (MOLYBDENUM DISULFIDE)
CAS: 1317-33-5
RTECS: QA4697000
Fraction By Weight: 3-9.99%
OSHA PEL 5 MG/M3 (MO)
ACGIH TLV: 5 MG/M3 (MO)
H2S CONCS ABOVE PERMISSIBLE CONCS CAN CAUSE IRRIT OF
RTECS: 9999999ZZ
PULM EDEMA. AT CONCS >300 PPM, RESP PARAL, CAUSING
RTECS: 9999999ZZ
MOUTHFULS ARE SWALLOWED, ABDOM DISCOMFORT, NAUS &
RTECS: 9999999ZZ
DOCUMENTED IN HUMANS AS RSLT OF CHRONIC EXPOS.
RTECS: 9999999ZZ
SHOWN TO CAUSE SKIN CANCER WHEN RPTDLY APPLIED TO
RTECS: 9999999ZZ
APPLICATIONS. IARC HAS CONCLUDED THAT ASPHALTS
RTECS: 9999999ZZ
CARCINOGENIC TO LAB ANIMALS.
RTECS: 9999999ZZ
CLEANING/CONTAM CLTHG MAY BE MORE EFTIVE
RTECS: 9999999ZZ
FOR CLEANING OF POTNTL HAZS ASSOC W/HNDLG CONTAM
RTECS: 9999999ZZ
CAUSE FIRE, EXPLO/TOX FUMES FROM RESIDUES. DO
RTECS: 9999999ZZ
CLOSED & DRUM BUNGS IN PLACE.
RTECS: 9999999ZZ
CONTAM. NIOSH APPRVD AIR SUPPLIED RESPS SHOULD
RTECS: 9999999ZZ
CONTENT IS UNKNOWN.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT) >5 G/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:MAY CAUSE MIN IRRIT, EXPER
AS TEMPORARY DISCOMFORT. SKIN:PRLNG CONT, AS W/CLTHG WETTED W/MATL,
MAY CAUSE DEFAT/IRRIT, SEEN AS LOC REDNESS W/POSS MILD DISCOMFORT.
MATL FROM HIGH PRESS EQUIP, PINHOLE LEAKS/HIGH PRESS LINE FAILURE
CAN PENETRATE &, IF NOT PROPERLY TREATED, CAN CAUSE SEV INJURY,
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:INCL DISFIGUREMENT, LOSS OF FUNC/EVEN
REQ AMPUTATION OF AFFECTED AREA. TO PVNT SUCH SERIOUS INJURY, IMMED
MED ATTN SHOULD BE SOUGHT EVEN IF INJECTION INJURY APPEARS TO BE
MINOR. INHAL:VAPS/MI STS IN HIGH CONCS, AS GENERATED FROM
SPRAYING/HEATING IN ENCLSD SPACE, MAY CAUSE MIN IRRIT. WHEN
OVERHEATED, (SUPDAT)
Medical Cond Aggravated by Exposure:BECAUSE OF ITS DEFATTING
PROPERTIES, PROLONGED & REPEATED SKIN CONTACT MAY AGGRAVATE AN
EXISTING DERMATITIS (SKIN CONDITION).
First Aid
First Aid:EYES:FLUSH W/PLENTY OF WATER FOR AT LST 15 MINS. GET MED ATTN
IF IRRIT PERSISTS. INGEST:IF MORE THAN SEVERAL MOUTHFULS OF THIS
MATL ARE SWALLOWED, GIVE 2 GLASSES OF WATER (16 OZ). GET MED ATTN.
INHAL: REMOVE TO FRESH AIR. SKIN:WASH W/PLENTYOF SOAP & WATER FOR
SEVERAL MINS. GET MED ATTN IF IRRIT DEVELS/PERSISTS. REMOVE &
DRY-CLEAN/LAUNDER CLTHG SOAKED/SOILED W/THIS MATL BEFORE REUSE. DRY
(ING 13)
Fire Fighting
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM OR CARBON
DIOXIDE TO EXTINGUISH FLAMES.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . USE WATER SPRAY TO COOL FIRE-EXPOSED CONTAINERS. WATER
OR FOAM MAY CAUSE FROTHING.
Unusual Fire/Explosion Hazard:HYDROGEN SULFIDE (H2S) MAY BE RELEASED IF
OVERHEATED.
Accidental Release
Spill Release Procedures:CONTAIN SPILL IF POSSIBLE, CONTAIN W/ABSORBENT
MATERIALS SUCH AS CLAY OR SOIL & SHOVEL UP. AVOID SKIN & EYE
CONTACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:MIN FEASIBLE HNDLG TEMPS SHOULD BE
MAINTAINED. PERIODS OF EXPOS TO HIGH TEMPS SHOULD BE MIN. WATER
CONTAM SHOULD BE AVOIDED.
Other Precautions:READ & UNDERSTAND MSDS BEFORE HNDLG/DISP OF PROD.
AVOID PRLNG BRTHG OF VAP, MIST/GAS. CAUT:MISUSE OF EMPTY CNTNRS CAN
BE HAZ. EMPTY CNTNRS CAN BE HAZ IS USED TO STORE TOX,
FLAMM/REACTIVE MATLS. CUTTIN G/WELDING OF EMPTY CNTNRS MIGHT (ING
15)
Exposure Controls
Respiratory Protection:AIRBORNE CONCS SHOULD BE KEPT TO LOWEST LEVELS
POSS. IF VAP, MIST/DUST IS GENERATED & OCCUP EXPOS LIM OF PROD/ANY
COMPONENT OF PROD, IS EXCEEDED, USE APPROP NIOSH APPRVD AIR
PURIFYING/AIR SUPPLIED RES P AFTER DETERM AIRBORNE CONC OF (ING 17)
Ventilation:ADEQUATE TO MEET COMPONENT OCCUPATIONAL EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS &(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WORKERS SHOULD WASH EXPOS SKIN SEVERAL TIMES
DAILY W/SOAP & WATER. SOILED WORK CLTHG SHOULD BE
LAUNDERED/DRY-CLEANED.
Supplemental Safety and Health
HAZ DECOMP PROD:MOLYBDENUM, SULFUR (MAY INCL HYDROGEN SULFIDE). WASTE
DISP METH:PROD MEETS RCRA CRITERIA FOR HAZ WASTE. THIS IS BECAUSE
PROD USES, TRANSFORMATIONS, MIXTS, PROCESSES, ETC, MAY RENDER RE
SULTING MATLS HAZ. EYE PROT:FULL LGTH FSHLD . EFTS OF OVEREXP:PROD
MAY RELS HYDROGEN SULFIDE (H2S) GAS. (ING 6)
Chemical Properties
Vapor Pres:<0.1
Solubility in Water:<0.1%.
Appearance and Odor:BLACK SEMI-SOLID.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:UNDER EXTREME TEMPS/EXTENDED STOR PERIODS,
HYDROGEN SULFIDE (H2S) GAS MAY ACCUM IN HEAD-SPACE OF CONTAINER.
Hazardous Decomposition Products:TOX LEVELS OF CARBON MONOXIDE, CARBON
DIOXIDE, IRRIT ALDEHYDES & KETONES & COMBUST PRODS/CMPDS OF
CALCIUM, (SUPP DATA)
Disposal
Waste Disposal Methods:DISP MUST BE I/A/W FED, STATE & LOC REGS. PROD
HAS BEEN EVAL FOR RCRA CHARACTS & DOES NOT MEET CRITERIA OF HAZ
WASTE IF DISCARDED IN ITS PURCHASED FORM. UNDER RCRA, IT IS
RESPONSIBILITY OF USER OF PROD TO DETERM AT TIME OF DISP,
WHETHER(SUPDAT)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.