Product ID:EUTROLOY 16804
MSDS Date:09/07/1995
FSC:3439
NIIN:00N072161
MSDS Number: CDWSX

EUTECTIC CORP

1515 BROOK DR
DOWNERS GROVE, IL 60515
US

Emergency Phone: 800-323-4845

Info Phone: 800-323-4845

Cage: 72271

EUTECTIC CORPORATION

DOWNERS GROVE, IL 60515 US

Telephone: 800-323-4845

Cage: 5N977

CHROMIUM (SARA 313) (CERCLA)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 18-25%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NIOBIUM (ALSO CALLED COLUMBIUM)

CAS: 7440-03-1

OSHA PEL N/K

ACGIH TLV: N/K

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 55-75%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

FORM FROM INGS. DECOMP PRODS OF NORM

RTECS: 9999999ZZ

OF MATLS SHOWN IN INGS SECTION, PLUS THOSE OF BASE

RTECS: 9999999ZZ

COMPLEX

RTECS: 9999999ZZ

MAY PRDCE FLUORIDE CMPDS, METAL OXIDES, CARBON &

RTECS: 9999999ZZ

MONOXIDE & DIOXIDE, NITROGEN OXIDES, & CERTAIN INERT

RTECS: 9999999ZZ

DETERMINE COMPOSITION & QTY OF FUMES & GASES TO

RTECS: 9999999ZZ

WORKER'S HELMET IF WORN OR IN THE WELDER'S

RTECS: 9999999ZZ

NTP 7TH ANNUAL REPORT ON CARCINOGENS,

RTECS: 9999999ZZ

NAUS/DRYNESS/IRRIT OF NOSE, THROAT/EYES.

RTECS: 9999999ZZ

PNEUMOCONIOSIS/SIDEROSIS (IRON DEPOSITS IN LUNG).

RTECS: 9999999ZZ

METALLIC CMPDS DURING WELDING, HEATING, BRAZING,

RTECS: 9999999ZZ

INFLUENZA TYPE SICKNESS INCL CHILLS, FEVER, HEAD &

RTECS: 9999999ZZ

MOUTH, MUSC PAIN, NAUS & VOMIT. SYMPS USUALLY OCCUR

RTECS: 9999999ZZ

CONSULT MD IMMED IF ANY OF THESE SYMPS DEVELOP

RTECS: 9999999ZZ

TO GEN IRRIT OF RESP TRACT IF INHALED. LONG TERM

RTECS: 9999999ZZ

FUNC. LUNGS WILL CLEAR WHEN EXPOS CEASES. NICKEL

RTECS: 9999999ZZ

FILTER LENS. PROVIDE PROT SCREENS & FLASH GOGG IF

RTECS: 9999999ZZ

IS TOO DARK TO SEE WELD ZONE, THEN GO TO NEXT

RTECS: 9999999ZZ

SPKS & ELEC SHOCK. AT MIN, THIS INCL

RTECS: 9999999ZZ

APRONS, HATS AS WELL AS DARK, PROT CLOTHING.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: FUMES CAN BE DANGEROUS
TO YOUR HLTH & OVEREXP CAN CAUSE LUNG DMG &/OTHER ORGAN DMG.
EYE/SKIN: ARC RAYS & ULTRAVIOLET LIGHT CAN INJURE EYES & BURN SKIN.
LIQS USED IN FLUXES & CHEM AIDS MA Y CAUSE IRRIT/POSS CHEM BURNS.
ELEC SHOCK CAN KILL. INGEST: DANGER! MAY BE HARMFUL/FATAL IF
SWALLOWED. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL: IARC MONOGRAPHS ON EVALUATION OF
CARCIN RISK OF CHEMICALS TO MAN, VOL 49, PG 257, 1990: GROUP 2B.
(ING 13)
Effects of Overexposure:HLTH HAZ: CHRONIC: GEN WELDING FUMES: ELEC ARC
WELDING, BRAZING, SOLDERING/THERMAL SPRAYING MAY CREATE ONE/MORE OF
THE FOLLOWING HLTH HAZ: FUMES, GASES & DUSTS CAN BE DANGEROUS TO
YOUR HLTH. CERTAIN M ED STUDIES HAVE SUGGESTED LUNG DMG CAN RSLT
FROM OVEREXP TO THOSE FUMES. SHORT TERM OVEREXP MAY RSLT IN DIZZ,
(ING 14)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:INHAL: MOVE VICTIM TO FRESH AIR SOURCE. CONTACT MD & ADVISE
OF INGREDIENTS. SKIN: THOROUGHLY WASH HANDS/AFFECTED AREAS W/SOAP &
WATER TO REMOVE ALL RESIDUE. IF RASH/BURN DEVELOPS, CONSULT MD.
EYES: TH OROUGHLY FLUSH W/WATER FOR AT LEAST 15 MINUTES TO REMOVE
ALL RESIDUE. OBTAIN PROMPT MED ADVICE FOR FLUXES & CHEMICAL AIDS.
ADVISE MD OF INGS. INGEST: CALL MD &/LOCAL POISON CTL CTR. ADVISE
OF INGS.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:GEN NON-FLAM WELDING ARC SPKS & FLAMES
CAN IGNITE COMBUST & FLAMS. METAL POWDER DUST MAY PRESENT
FIRE/EXPLO HAZ UNDER FAVORABLE CNDTNS OF PARTICLE SIZE(SUP DAT)

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PLEASE READ AND UNDERSTAND THE PRODUCT
LABEL INFORMATION FOR PROPER PROCEDURES AND USE.
Other Precautions:SEE ANSI Z49.1 "SFTY IN WELDING & CUTTING" & CHAPTER
II OF "THERMAL SPRAYING" PUBLISHED BY AMERICAN WELDING SOCIETY &
OSHA PUBLICATION 2206 (29 CFR 1910) FOR MORE DETAIL. TRAIN WELDER
TO KEEP HIS/HER FACE AWAY FROM FUME/DUST PLUME.

Respiratory Protection:IF THE WORK STATION IS NOT PROPERLY VENTILATED
TO EXHAUST ALL FUMES, VAPORS AND DUSTS BELOW THE RECOMMENDED
EXPOSURE LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP ALL
FUMES & DUSTS FROM WORKER'S BRTHG ZONE & GEN AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:WEAR HELMET/USE FSHLD W/APPROP (ING 22)
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR HAND, HEAD & BODY PROT WHICH HELP PVNT INJURY FROM RADIA, (ING
24)
Work Hygienic Practices:TRAIN WORKERS NOT TO TOUCH LIVE ELEC PARTS & TO
INSULATE THEMSELVES FROM WORK & ELEC GROUND.
Supplemental Safety and Health
EXPLO HAZ:DISPERSION & STRONG IGNIT SOURCE. WHEN PREPARING WORKPLACE
W/FLAM CHEM AID, KEEP ALL WELDING SOURCES, SPKS & FLAMES AT LEAST
20 FEET FROM WORKPLACE UNTIL FLAM EVAPS. TOX FUMES MAY BE PRDCED.
SOME FLUXES & CHEM AIDS MAY GIVE OFF HYDROGEN CHLORIDE, PHOSGENE &
CHLORINE GAS. CANS, UNDER PRESS, & FLAM MAY EXPLODE.

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DURING WELDING, THERMAL SPRAYING &
ALLIED PROCESSES, FUME & GAS DECOMP PRODS GENERATED ARE DIFFERENT
IN PERCENT &(ING 6)

Waste Disposal Methods:DISPOSE OF WASTE MATERIAL, POWDERS,
GRINDING/FILLER RESIDUES IN AN ENVIRONMENTALLY SENSITIVE MANNER IN
ACCORDANCE WITH FEDERAL, STATE & LOCAL REGULATIONS. USE APPROP
MEASURES TO KEEP AIRBORNE DUST LEV ELS CONTAINED I/A/W EXPOS LEVELS
IN INGS SECTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.