CDYPY - 835 0167, KODAK FLEXICOLOR STABILIZER & REPLENISHER LF

  • MSDS: CDYPY
  • Manufacturer: EASTMAN KODAK COMPANY
  • Product Name: 835 0167, KODAK FLEXICOLOR STABILIZER & REPLENISHER LF
  • National Stock Number: 6750-00D006057
Product Identification

Product ID:835 0167, KODAK FLEXICOLOR STABILIZER & REPLENISHER LF
MSDS Date:07/19/1995
FSC:6750
NIIN:00D006057
Kit Part:Y
MSDS Number: CDYPY

Responsible Party
EASTMAN KODAK COMPANY
343 STATE STREET
ROCHESTER, NY 14650
US

Emergency Phone: 716-722-5151

Info Phone: 716-722-5151

Cage: 19139

Contractor
EASTMAN KODAK CO US CUSTOMER SERVICE/GOVERNMENT SALES
ROCHESTER, NY 14650-3129 US

Telephone: 800-828-6203

Cage: 5K871

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 95-100%


HEXAMINE

CAS: 100-97-0

RTECS: MN4725000

Fraction By Weight: <10%


SODIUM DODECYLBENZENE SULFONATE (CERCLA)

CAS: 25155-30-0

RTECS: DB6825000

Fraction By Weight: <1%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


DIPROPYLENE GLYCOL

CAS: 110-98-5

RTECS: UB8785000

Fraction By Weight: <1%


NONIONIC SURFACTANTS

Fraction By Weight: <10.0%


1,2-BENZISOTHIAZOL-3(2H)-ONE

CAS: 2634-33-5

RTECS: DE4620000

Fraction By Weight: <1%

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: EXPECTED TO BE A LOW
HAZARD FOR RECOMMENDED HANDLING. EYES: NO SPECIFIC HAZARD KNOWN.
MAY CAUSE TRANSIENT IRRITATION. SKIN: LOW HAZARD FOR RECOMMENDED
HANDLING. INGESTION: EXPECTED TO BE A LOW INGESTION HAZARD.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHALATION-IF SYMPTOMATIC, MOVE TO FRESH AIR. GET MEDICAL
ATTENTION IF SYMPTOMS PERSIST. EYES-ANY MATERIAL THAT CONTACTS THE
EYES SHOULD BE WASH OUT IMMEDIATELY WITH WATER. GET MEDICAL
ATTENTION. SKIN : WASH WITH SOAP AND WATER. GET MEDICALATTENTION IF
SYMPTOMS OCCUR. INGESTION- DRINK 1-2 GLASSES OF WATER. SEEK MEDICAL
ATTENTION.

Fire Fighting

Flash Point:NONE
Extinguishing Media:USE APPROPIATE AGENT FOR ADJACENT FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER.
OTHERWISE, ABSORB SPILL WITH VERMICULITE OR OTHER INERT MATERIAL,
THEN PLACE IN A CONTAINER FOR CHEMICAL WASTE. CLEAN SURFACE
THOROUGHLY TO REMOVE RESIDUAL CONTAMINATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED. KEEP AWAY FROM
INCOMPATIBLE SUBSTANCES.
Other Precautions:USE WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER
HANDLING.

Exposure Controls

Respiratory Protection:IF FORMALDEHYDE IS EMITTED AT LEVELS REQUIRING
RESPIRATORY PTOTECTION THE FOLLOWING RESPIRATOR TYPE SHOULD BE
WORN: FULL FACEPIECE WITH CARTRIDGE OR CANISTER SPECIFICALLY
APPROVED BY NIOSH FOR FORMALD EHYDE PROTECTION.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES/HR)
SHOULD BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS
Protective Gloves:IMPERVIOUS GLOVES SHOULD BE WORN.
Eye Protection:WEAR SAFETY GLASSES WITH SIDE SHIELDS.
Other Protective Equipment:EYE BATH, SAFETY SHOWER, WASHING FACILITIES.
WEAR PROTECTIVE CLOTHING APPROPIATE FOR RISK OF EXPOSURE.
Work Hygienic Practices:IT IS GOOD INDUSTRIAL HYGIENE PRACTICE TO
MINIMIZE EYE CONTACT. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
KEEP OUT OF REACH OF CHILDREN.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18 MMHG
Vapor Density:0.6 AIR=1
Spec Gravity:1.00
pH:7.5
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID, AMBER, SLIGHT AMINE ODOR.
Percent Volatiles by Volume:95-100

Stability

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:STABLE.
Hazardous Decomposition Products:AMMONIA, FORMALDEHYDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISCHARGE, TREATMENT, OR DISPOSAL MAY BE SUBJECT
TO NATIONAL, STATE, OR LOCAL LAWS. FLUSH TO SEWER WITH LARGE
AMOUNTS OF WATER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.