CFCHC - CHAIN SAW/AIR COOLED ENGINE OIL SL2261,SL2269
- MSDS: CFCHC
- Manufacturer: CRC CHEMICALS U S A CRC INDUSTRIES INC
- Product Name: CHAIN SAW/AIR COOLED ENGINE OIL SL2261,SL2269
- National Stock Number: 9150-00D000348
Product Identification
Product ID:CHAIN SAW/AIR COOLED ENGINE OIL SL2261,SL2269
MSDS Date:06/10/1994
FSC:9150
NIIN:00D000348
MSDS Number: CFCHC
Responsible Party
WARMINSTER, PA 18974-2820
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 215-674-4300
Preparer: ADAM SELISKER
Cage: 10136
Contractor
Telephone: 310-664-2121/800-424-9300(CHEMTREC)
Cage: 33876
Ingredients
LUBE OIL 500 SUS
CAS: 64742-52-5
MINERAL SPIRITS
CAS: 64741-65-7
Fraction By Weight: 15-20%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
PROPRIETRY ADDITIVE SYSTEM
Fraction By Weight: 5%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE IRRIT, SKIN IRRIT, IRRIT OF
UPPER RESPIRATORY TRACT. CHRONIC:REPEATED CONTACT CAN CASUE
DERMATITIS.
Explanation of Carcinogenicity:PER MSDS:NTP/IARC/OSHA:NO.
Effects of Overexposure:EYE IRRIT, SKIN IRRIT, UPPER RESPIRATORY TRACT
IRRIT, DERMATITIS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN & PRE-EXISTING
RESPIRATORY CONDITIONS.
First Aid
First Aid:IF SYMPTOMS PERSIST CALL PHYSICIAN.INHAL:REMOVE TO FRESH
AIR.EYE:FLUSH W/LG AMTS OF WATER FOR 15MINS.SKIN:WASH THOROUGHLY
W/SOAP/WATER.INGEST:DO NOT INDUCE VOMIT.
Fire Fighting
Flash Point Method:TCC
Flash Point:150F,66C
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:0.7
Upper Limits:5.0
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR & IF HEATED
MAY TRAVEL TO IGNITION SOURCE & FLASH BACK.
Accidental Release
Spill Release Procedures:ABSORB SPILL W/ABSORBENT MATL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL DRY AREA.
Other Precautions:ENCLSD/HEADSPACES IN MATL TANKS,PIPE,CNTNRS,ENCLSD
SPACES/LOW-LYING AREAS MAY CONTAIN HAZ VAPOR
CONCENTRATIONS.EXERCISE CAUTION & WEAR RECOMMENDED PROTECTIVE
CLOTHING & EQPMT WHEN HNDLG/WORKING W/MATL .
Exposure Controls
Respiratory Protection:USE SELF-CONTAINED BREATHING APPARATUS IF
ACCUMULATION OF VAPORS IS SUSPECTED.
Ventilation:ADEQUATE VENTILATION TO PREVENT ACCUMULATION OF VAPORS.
Protective Gloves:RESISTANT GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NA
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
Chemical Properties
HCC:V4
Boiling Pt:B.P. Text:>300F,>149C
Melt/Freeze Pt:M.P/F.P Text:ND
Decomp Temp:Decomp Text:NP
Vapor Pres:LOW
Vapor Density:>AIR
Spec Gravity:0.85-0.95
pH:NA
Viscosity:NP
Evaporation Rate & Reference:NEG
Solubility in Water:NP
Appearance and Odor:BLUE, OILY LIQUID, WITH FAINT PETROLEUM ODOR.
Percent Volatiles by Volume:15-20
Corrosion Rate:NP
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE.
Disposal
Waste Disposal Methods:ALL USED & UNUSED PRODUCT SHOULD BE DISPOSED OF
IN CONFORMANCE W/LOCAL, STATE AND FEDERAL REGULATIONS.CONTAINS NO
CHEM SUBJ TO RELEASE REPORTING UNDER SEC 313 SARA TITLE III.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.