CFFCY - PHENOL FORMALDEHYDE RESIN
- MSDS: CFFCY
- Manufacturer: ASIA PACIFIC MICROSPHERES SON 8HD
- Product Name: PHENOL FORMALDEHYDE RESIN
- National Stock Number: 9330-00-130-0409
Product Identification
Product ID:PHENOL FORMALDEHYDE RESIN
MSDS Date:01/01/1996
FSC:9330
NIIN:00-130-0409
MSDS Number: CFFCY
Responsible Party
SELANGOR DARUL EHSAN,WEST MALAYSIA
Emergency Phone: 603-559-1801
Info Phone: 603-550-2168
Cage: KO160
Contractor
Telephone: 603-550-2168
Cage: 0MN47
Ingredients
PHENOL FORMALDEHYDE RESIN
CAS: 9003-35-4
Fraction By Weight: 100%
PHENOL (SARA 302/313) (CERCLA)
CAS: 108-95-2
RTECS: SJ3327000
Fraction By Weight: 0.01%
OSHA PEL S, 5 PPM
ACGIH TLV: S, 5 PPM; 9596
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
FORMALDEHYDE (SARA 302/313) (CERCLA)
CAS: 50-00-0
RTECS: LP8925000
Fraction By Weight: 0.001%
OSHA PEL SEE 1910.1048
ACGIH TLV: C 0.3 PPM, A2; 9596
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST/SKIN ABSORPTION/SKIN CONTACT:NO
EVIDENCE OF HARMFUL EFFECTS FROM AVAI INFO.INHAL:SHORT TERM HARMFUL
EFFECT NOT EXPECTED FROM VAP GENERATED @AMB TEMPS.EYE:MAY CAUSE
IRRIT,EXPERIENCED AS STINGING W/EXCESS BLINKING & TEAR
PRODUCTION.REDNESS & SWELLING OF CONJUCTIVA MAY OCUR.
Explanation of Carcinogenicity:PER MSDS:CONTAIN TRACE AMT(<0.001%)OF
FREEE FORMALDEHYDE-LISTED BY IARC/NTP/OSHA AS CARCINOGEN.CA PROP
65.
Effects of Overexposure:EYE IRRITATION, STINGING W/EXCESS BLINKING/TEAR
PRODUCTION, REDNESS/SWELLING OF CONJUCTIVA.
Medical Cond Aggravated by Exposure:A KNOWLEDGE OF AVAI TOXICOLOGY INFO
& PHYSICIAL/CHEM PROPERTIES OF MATLS SUGGEST THAT OVEREXPO IS
UNLIKELY TO AGGRAVATE EXISTING MED CONDITIONS.
First Aid
First Aid:INGEST/INHAL:NO EMERG CARE ANTICIPATED.SKIN:REMOVE CONTAMIN
CLOTH.WASH SKIN W/SOAP/WATER.OBTAIN MED ATTN IF IRRIT
PERSISTS.EYE:IMMED FLUSH W/WATER & CONTINUE WASHING FOR SEVERAL
MINS.OBTAIN MED ATTN I F DISCOMFORT PERSIST.DR:THERE'S NO SPECIFIC
ANTIDOTE.TREAT OF OVEREXPO SHOULD BE DIRECTED @CONTROL OT
SYMPTOMS/CLINICAL CONDITION OF PATIENT.
Fire Fighting
Autoignition Temp:Autoignition Temp Text:D
Lower Limits:D
Upper Limits:D
Extinguishing Media:APPLY ALCOHOL TYPE OR ALL PURPOSE TYPD FOAMS BY MFG
RECOMMENDED TECHNIQUE FOR LG FIRES.USE CO OR DRY CHEM MEDIA FOR SM.
Fire Fighting Procedures:DO OT DIRECT SOLID STREAM OF WATER OR FOAM
INTO BURNING MOLTEN MATL;THIS MAY CAUS SPATTERING & SPREAD OF
FIRE.USE SELF-CONTAIN BREATH APPARATUS & PROT CLOTHING.
Unusual Fire/Explosion Hazard:AVOID DISPERSION OF DUST IN AIR TO REDUCE
POTENTIAL OF DUST IGN/EXPLOSIONS.FORMALDEHYDE & PHENOL MAY FORM
UNDER FIRE CONDITIONS.
Accidental Release
Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING.COLLECT FOR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID DISPERSION OF DUST IN
AIR;SPARKS/FLAME UNDER DUST CONDITIONS/SKIN CONTACT.USE W/ADEQU
VENTI.ELECTR BOND/GROUND ALL EQPMT.SEE DISPO SEC FOR DRYIG
Other Precautions:CONTAIN <0.001% FREE FORMALDEHDYE-SHOULD BE MIN RISK
WHEN ADEQUATE VENTI USED DUE TO VERY LOW FORMALDEHYDE CONCEN.MAY
UNDERGO SPONT SMOULDER IF STORE/HEAT IN BULK >25C UNDER CONDITIONS
ALLOWING AIR IN GRESS TO PROD.STORE PKG IN COOL(SUPPLEM)
Exposure Controls
Respiratory Protection:DUST RESPIRATORY IF DUSTING CONDITIONS EXISTS.
Ventilation:SPECIAL LOC VENTI RECOMMENDED IN AREAS WHERE CNTNRS OPENED
& CONTENTS DISCHARGE OR IN ANY OTHER AREAS WHERE DUSTING OCCU
Protective Gloves:GENERAL WORKING GLOVES ACCEPTABLE.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:EYE BATH,SAF SHOWER.
Work Hygienic Practices:WASH CONTAMIN CLOTH BEF REUSE.
Supplemental Safety and Health
OTHER PREC:WELL VENTI AREA.DON'T STORE IN SUN/DRY IN PKG-USE SPEC
DRYING INSTRUCT.MICROSPHERES UNDERGO OXIDATION @ HI TEMP.DUE TO ITS
EXCELLENT INSULATING CHARACT INTERNAL MASS TEMP CAN INCR TO PT WHE
RE SPONT IGN/SMOULDER CAN OCCUR.TEMP THIS OCCUR FUNCTION OF
GEOMETRY,AMT,AVAI OXY.SMOULDER-SOFT GLOW LIKE BURN CHARCOAL.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:NA
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:NONE SPECIFIED.
Appearance and Odor:HOLLOW SPHERES,RED BRONW COLOR, NO ODOUR SPECIFIED.
Percent Volatiles by Volume:>WATER
Corrosion Rate:NP
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS,STRONG ACIDS,STRONG ALKALIES,HALOFENS,ACYL
HALIDES.
Stability Condition to Avoid:NONE KNOWN.PREVENT DISPERSE OF MATL IN AIR
TO FORM DUST-ANY FINELY DIVIDED ORG MATL IN AIR CAN IGN/DUST EXPLO.
Hazardous Decomposition Products:BURNING/THERM DECOMPO CNA PRODUCE
PHENOL,FORMALDEHYDE,CO(HIGHLY TOXIC IF INHAL) &/OR CO2(SUFFI CONCE
ACT AS ASPHYXIANT).
Disposal
Waste Disposal Methods:INCINERATE IN FURNACE,OTHERWISE DISPO OF IAW
APPROPRIATE NAT/LOC REGS.NOT SARA SEC 313/CERCLA CHEMS. DRY:TO
REDUCE MOISTURE <4%,DRY 2" LAYER @75C MAX 24HRS W/CLOTH(THAT ALLOWS
MOISTURE EVAPO)OVER MATL .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.