CFFLQ - 873 2513 RP X-OMAT LO FIXER & REPLNSHR PART B TO MAKE 20 GAL
- MSDS: CFFLQ
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: 873 2513 RP X-OMAT LO FIXER & REPLNSHR PART B TO MAKE 20 GAL
- National Stock Number: 6750-01-428-0288
Product Identification
Product ID:873 2513 RP X-OMAT LO FIXER & REPLNSHR PART B TO MAKE 20 GAL
MSDS Date:03/26/1997
FSC:6750
NIIN:01-428-0288
Kit Part:Y
MSDS Number: CFFLQ
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 800- 242-2424
Cage: 19139
Contractor
Telephone: 800-828-6203
Cage: 5K871
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 75-80%
ALUMINUM SULFATE
CAS: 10043-01-3
RTECS: BD1700000
Fraction By Weight: 20-25%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9596
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXPECTED TO BE A LOW INHALATION HAZARD
FOR RECOMMENDED HANDLING. NO SPECIFIC EYE HAZARD KNOWN. MAY CAUSE
TRANSIENT IRRITATION. LOW SKIN HAZARD FOR RECOMMENDED HANDLING.
EXPECTED TO BE LOW INGESTION HA ZARD.
Explanation of Carcinogenicity:PER MSDS:CARCINOGENICITY CLASSIFICATION:
IARC/ACGIH/NTP/OSHA:NONE.
Effects of Overexposure:TRANSIENT EYE IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION-IF SYMPTOMATIC, MOVE TO FRESH AIR. GET MEDICAL
ATTENTION IF SYMPTOMS OCCUR. EYES-FLUSH WITH WATER FOR 15 MINUTES.
GET MEDICAL ATTENTION IF SYMPTOMS OCCUR. SKIN-WASH WITH SOAP &
WATER. GET M EDICAL ATTENTION IF SYMPTOMS OCCUR. INGESTED-IF
CONSCIOUS, DRINK 1-2 GLASSES OF WATER. SEEK MEDICAL ATTENTION.
Fire Fighting
Flash Point:NONE
Extinguishing Media:USE APPROPRIATE AGENT FOR ADJACENT FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING. FIRE OR EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:NONE. NON-COMBUSTIBLE LIQUID.
Accidental Release
Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER.
OTHERWISE ABSORB W/VERMICULITE OR OTHER INERT MATERIAL, THEN PLACE
IN CONTAINER FOR CHEMICAL WASTE. CLEAN SURFACE THOROUGHLY TO REMOVE
RESIDUAL CONTAMINATIO N.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE W/ADEQUATE VENTILATION.KEEP FRM
CONTACT W/OXIDIZING MATERIALS.KEEP CONTAINER TIGHTLY CLOSED.KEEP
AWAY FROM INCOMPATIBLE SUBSTANCES.
Other Precautions:THIS MATERIAL HAS NOT BEEN TESTED FOR ENVIRONMENTAL
EFFECTS.
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES/HR)
SHOULD BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS, GOGGLES.
Other Protective Equipment:EYEBATH, WASHING FACILITIES, SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS WELL AFTER HANDLING. FOLLOW GOOD
INDUSTRIAL HYGIENE PRACTICES TO MINIMIZE EYE/SKIN CONTACT.
Supplemental Safety and Health
KEY1=C3. PART B OF TWO PART KIT. SEE PNI A FOR PART A.
Chemical Properties
HCC:C3
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18
Vapor Density:0.6
Spec Gravity:1.30
pH:2.3
Solubility in Water:COMPLETE
Appearance and Odor:COLROLESS, ODORLESS, LIQUID.
Percent Volatiles by Volume:75-80
Stability
Stability Indicator/Materials to Avoid:YES
NONE WITH COMMON MATERIALS AND CONTAMINANTS WITH WHICH THE MATERIAL MAY
BE REASONABLY COME INTO CONTACT WITH.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:SULFUR DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISCHARGE/TREATMENT/DISPOSAL MAY BE SUBJECT TO
NATIONAL, STATE AND LOCAL LAWS. FLUSH TO SEWER WITH LARGE AMOUNTS
OF WATER. CHEMICALS SUBJECT TO REPORTING REQUIRMENTS OF SECTION 313
TITLE III SARA/40CF R PART 372:NONE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.