CFKFX - TIN-LEAD SOLDER-WILL COVER ALL SOLDERS CONTAINING TIN & LEAD
- MSDS: CFKFX
- Manufacturer: NATIONAL WELDING ALLOYS INC
- Product Name: TIN-LEAD SOLDER-WILL COVER ALL SOLDERS CONTAINING TIN & LEAD
- National Stock Number: 3439-01-008-7580
Product Identification
Product ID:TIN-LEAD SOLDER-WILL COVER ALL SOLDERS CONTAINING TIN & LEAD
MSDS Date:03/21/1988
FSC:3439
NIIN:01-008-7580
MSDS Number: CFKFX
Responsible Party
PITTSBURGH, PA 15215
US
Emergency Phone: 412-781-4255, CHEMTREC 800-424-9300
Info Phone: 412-781-4255
Cage: 0ACE2
Contractor
Telephone: 412-781-4255
Cage: 0ACE2
Ingredients
TIN
CAS: 7440-31-5
RTECS: XP7320000
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9596
LEAD (SARA 313) (CERCLA)
CAS: 7439-92-1
RTECS: OF7525000
OSHA PEL SEE 1910.1025
ACGIH TLV: 0.05MG/M3, A3; 9596
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
NO OHTER HAZ MATLS IS PRESENT IN CONCEN GREATER THAN
RTECS: 9999999ZZ
Fraction By Weight: NA
LEAD (SARA 313) (CERCLA) (BARE WIRE COMPO)
CAS: 7439-92-1
RTECS: OF7525000
OSHA PEL SEE 1910.1025
ACGIH TLV: 0.05MG/M3, A3; 9596
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
BORON OXIDE (BORIC ACIDS) (FLUX COATING COMPO)
CAS: 1303-86-2
RTECS: ED7900000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3; 9596
FLUORIDES (FUME) (FLUX COATING COMPO)
ISOPARRAFINIC HYDROCARBONS
UREA (FLUX COATING COMPO)
CAS: 57-13-6
RTECS: YR6250000
ETHYLENEDIAMINE DIHYDROCHLORIDE (FLUX COATING COMPO)
CAS: 333-18-6
RTECS: KV3850000
OSHA PEL NOT ESTABLISHED.
ACGIH TLV: NOT ESTABLISHED.
ETHYLAMINE HYDROCHLORIDE
CAS: 557-66-4
SUCCINIMIDE (FLUX COATING COMPO)
CAS: 123-56-8
RTECS: WN2200000
OSHA PEL NOT ESTABLISHED.
ACGIH TLV: NOT ESTABLISHED.
WHITE PROTOPET IS (FLUX COATING COMPO)
SEBACIC ACID (FLUX COATING COMPO)
CAS: 111-20-6
RTECS: VS0875000
DIETHYLAMINE HYDROCHLORIDE (FLUX COATING COMPO)
CAS: 660-68-4
RTECS: IA3084000
SUCCINIC ACID (FLUX COATING COMPO)
CAS: 110-15-6
RTECS: WM4900000
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9596
POTASSIUM HYDROGEN FLUORIDE (FLUX COATING COMPO)
CAS: 7789-29-9
RTECS: TS6650000
POTASSIUM TETRAFLUOBORATE (FLUSH COATING COMPO)
CAS: 14075-53-7
RTECS: ED2800000
AZELAIC ACID (FLUX COATING COMPO)
CAS: 123-99-9
RTECS: CM1980000
OSHA PEL NOT ESTABLISHED.
ACGIH TLV: NOT ESTABLISHED.
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC EXPOSURE TO HIGH LEVELS OF
AIRBORNE OR INGESTED LEAD MAY RESULT IN ANEMIA,NAUSEA.IT IS
UNLIKELY THAT NORMAL EXPOSURE TO THIS MATL WOULD RESULT IN ACUTE
ILLNESS.
Explanation of Carcinogenicity:PER
MSDS:CARCINOGENICITY/NTP/IARC/OSHA:NA.
Effects of Overexposure:LEAD:NAUSEA, ANEMIA, CONSTIPATION.
Medical Cond Aggravated by Exposure:TOXIC/CHRONIC EXPOSURE:KIDNEY AND
BLOOD DISORDERS.
First Aid
First Aid:REMOVE FROM EXPOSURE;CONSULT PHYSICIAN.WHEN DANGER OF TOXIC
EXPOSURE TO LEAD EXISTS PERIODIC URINALYSIS & BLOOD TESTS SHOULD BE
RUN TO CHECK LEAD LEVELS.
Fire Fighting
Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO2, OR DRY CHEMICAL EXTINGUISHER.
Fire Fighting Procedures:USE NIOSH APPROVED SELF-CONTAINED BREATHING
APPARATUS & FULL PROTECTIVE CLOTHING IF INVOLVED IN FIRE.
Unusual Fire/Explosion Hazard:FINELY DIVIDED DUST MAY FORM EXPLOSIVE
MIXTURES W/AIR.WHEN OVERHEATED LEAD FUMES ARE TOXIC.
Accidental Release
Spill Release Procedures:SOLID/RECYCLABLE.CONFORM WITH APPLICABLE
REGULATORY STATUTES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DUST SHOULD BE KEPT TO MINIMUM.
Other Precautions:VACUUMING RECOMMENDED FOR ACCUMULATED DUST.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR WHERE DUST OR
FUMES ARE PRESENT.
Ventilation:LOC EXHAU:EXHAU FUMES AWAY FRM WORKAREA.MECH(GEN):ADEQU
VENTI SHOULD BE USED WHEN MATL IN DUSTY/MOLTEN STATE.SPEC:(SUPP)
Protective Gloves:RECOMMENDED FOR HIGH TEMPERATURES
Eye Protection:RECOMMENDED
Other Protective Equipment:STANDARD PROTECTIVE EQPMT NORMALLY USED IN
SOLDERING/APPLICABLE OPERATIONS.
Work Hygienic Practices:CONFORM W/LOCAL, STATE AND FEDERAL AND OSHA
REGULATORY STATUTES.
Supplemental Safety and Health
VENTI:CONFORM W/APPLICABLE REGULATIONS.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:N/ESTABLISH
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:N/ESTABLISHED
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY, ODORLESS
Percent Volatiles by Volume:NP
Corrosion Rate:NP
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALIS.
Hazardous Decomposition Products:AT TEMPERATURES ABOVE METLING
RANGE/TEMPS, OXIDE FUMES MAY EVOLVE.
Disposal
Waste Disposal Methods:WASTE SHOULD BE DISPOSED OF PROPERLY IAW LOCAL,
STATE AND FEDERAL AND OSHA REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.