CFLCJ - RG 60 CARBON AND LOW ALLOY BARE WELDING WIRE
- MSDS: CFLCJ
- Manufacturer: NATIONAL WELDING ALLOYS INC
- Product Name: RG 60 CARBON AND LOW ALLOY BARE WELDING WIRE
- National Stock Number: 3439-00-246-0564
Product Identification
Product ID:RG 60 CARBON AND LOW ALLOY BARE WELDING WIRE
MSDS Date:09/01/1995
FSC:3439
NIIN:00-246-0564
MSDS Number: CFLCJ
Responsible Party
PITTSBURGH, PA 15215
US
Emergency Phone: 412-781-4255, CHEMTREC 800-424-9300
Info Phone: 412-781-4255
Cage: 0ACE2
Contractor
Telephone: 412-781-4255
Cage: 0ACE2
Ingredients
ALUMINUM (SARA 313)
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 0.02%
OSHA PEL 15 MG/M3 DUST
ACGIH TLV: 10 MG/M3 DUST; 9596
COPPER (SARA 313) (CERCLA)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 0.30%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2 MG/M3 FUME; 9596
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: BALANCE
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5MG(FE)/M3FUME,B2;96
MANGANESE (SARA 313)
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: .90-1.4%
OSHA PEL C, 5 MG/M3 (FUME)
ACGIH TLV: 0.2 MG/M3; 9596
PHOSPHORUS COMPOUNDS
Fraction By Weight: .035%
SILICON
CAS: 7440-21-3
RTECS: VW0400000
Fraction By Weight: .1-.35%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9596
SULFUR
CAS: 7704-34-9
RTECS: WS4250000
Fraction By Weight: .035%
Hazards
LD50 LC50 Mixture:NOT GIVEN FOR PRODUCT AS A WHOLE
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WELDING GENERATES GASES AND
ELECTROMAGNETIC RADIATION WITH KNOWN ADVERSE HEALTH EFFECTS. THE
COMPOSITION OF WELDING EMISSIONS VARIES SUBSTANTIALLY WITH THE
WELDING PROCESS. SHORT TERM EXPOSURE MAY RES ULT IN RESPIRATORY
TRACT IRRITATION. LONG TERM EXPOUSRE MAY RESULT IN PNEUMOCONIOSIS.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:DISCOMFORT, DIZZINESS, NAUSEA, DRYNESS OR
IRRITATION OF THROAT. MAY CAUSE BURNS TO CONTACTED AREAS.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH IMPAIRED PULMONARY
FUNCTION OR ILLNESS MAY HAVE SYMPTOMS EXACERBATED BY IRRITANTS
CONTAINED IN WELDING FUMES.
First Aid
First Aid:PRODUCT NOT ANTICIPATED TO CAUSE SITUATIONS REQUIRING FIRST
AID AS SHIPPED/STORED. EMERGENCY FIRST AID MAY BE REQUIRED DURING
USE (WELDING). INHALATION: REMOVE FROM DUST OR FUME EXPOSURE. IF
BREATHING AS STOPPED PERFORM ARTIFICIAL RESPIRATION. SUMMON
MEDICAL AID IMMEDIATELY.
Fire Fighting
Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:NONFLAMMABLE. USE EXTINGUISHING MEDIA SUITABLE FOR
SURROUNDING FIRE.
Fire Fighting Procedures:IF THIS MATERIAL IS REDUCED TO POWDER FORM,
CAUTION MUST BE USED TO PREVENT FIRE OR EXPLOSION. TO EXTINGUISH A
METAL POWDER FIRE, USE DRY SAND, DRY GRAPHITE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:COLLECT AND HOLD FOR PICKUP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE EXHAUST SYSTEM TO CLEAR WELDING
FUMES. MAKE SURE THAT INHALED AIR DOES NOT CONTAIN FUME
CONSTITUENTS ABOVE PERMISSIBLE LEVELS.
Other Precautions:FOR OTHER PRECAUTIONS OR ADDITIONAL SAFETY
INFORMATION ON WELDING AND CUTTING, SEE AMERICAN STANDARD
Z49.1-1980- "SAFETY IN WELDING AND CUTTING" AND THE WELDING
HANDBOOK, VOLUME 1, CHAPTER 9, SAFE PRA CTICES IN WELDING &
CUTTING.
Exposure Controls
Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN WELDING, BRAZING OR SOLDERING IN CONFINED SPACE OR
WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW
PEL, TLV OR STEL.
Ventilation:USE ENOUGH VENTILATION, LOCAL EXHAUST AT THE ARC (OR FLAME)
OR BOTH TO KEEP FUMES AND GASES BELOW PELS, TLVS OR STELS.
Protective Gloves:WELDERS GLOVES WHEN WELDING
Eye Protection:PROTECTIVE FACE SHIELD WHEN WELDING
Other Protective Equipment:HEAD AND BODY PROTECTION TO PREVENT INJURY
FROM RADIATION, SPARKS, FLAME AND ELECTRICAL SHOCK.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
READ AND UNDERSTAND MANUFACTURER'S INSTRUCTIONS AND THE PRECAUTIONARY
LABEL ON THE PRODUCT. SEE AMERICAN NATIONAL STANTARD Z49.1, SAFETY
IN WELDING AND CUTTING PUBLISHED BY THE AMERICAN WELDING SOCIET Y,
P.O. BOX 351040, MIAMI, FL 33135 ANDOSHA PUBLICATION 2206 (29CFR
1910), U.S. GOVERNMENT PRINTING OFFICE
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID WIRE OR ROD, GREY TO COPPER IN COLOR.
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
MINERAL ACIDS, OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HYDROGEN GAS, VARIOUS ELEMENTAL METALS
AND METAL OXIDES
Disposal
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.