Product ID:HEAT-SHRINKABLE INTERCONNECTIONS W/SOLDER FOR HIGH TEMP WIRE
MSDS Date:10/01/1994
FSC:5940
NIIN:00-431-3997
MSDS Number: CFLCS

RAYCHEM CORP

300 CONSTITUTION DRIVE
MENLO PARK, CA 94025-1164
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 415-361-4907

Preparer: DONNA SEID

Cage: 06090

RAYCHEM CORP

MENLO PARK, CA 94025-1164 US

Telephone: 415-361-4907

Cage: 06090

BASE POLYMER MATERIALS INCLUDE INGREDS 2-8

Fraction By Weight: NP

OLEFIN COPOLYMERS

Fraction By Weight: NP

FLUOROPOLYMERS

Fraction By Weight: NP

CHLOROPOLYEMERS

Fraction By Weight: NP

POLYAMIDES

Fraction By Weight: NP

POLYESTERS

Fraction By Weight: NP

SILICONES

Fraction By Weight: NP

COATING-HEAT-SHRINKABLE PROD MAY BE COATED W/OR USED IN

Fraction By Weight: NP

OLEFIN COPOLYMERS

Fraction By Weight: NP

POLYAMIDES

Fraction By Weight: NP

SOLDERIS ENCASED IN HEAT-SHRIKABLE TUBING CONSISTS OF

Fraction By Weight: NP

LD50 LC50 Mixture:NO ESTABLISH EXPO LIMITS FOR POLYMER MIX
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PODS NOT HAZ DURING PROPER INSTALL BUT
HEAT-SHRINKABLE TUBING MAY EMIT HAZ THERM DECOMPO/COMBUST BYPRODS
IF OVERHEATED TO DEGRADATION.SOLDER,CONSIST OF METALS,PRESENT IN
PRODS IS ENCASED IN HEAT-SHRIN KABLE TUBING.PROD TESTING HAS DEMO
THATTHERES NO EXPO TO METAL FUMES @THERM DEGRADATION OF
TUBE.OVERHEAT TO CHAR/(SUPP)
Explanation of Carcinogenicity:PER MSDS:NONE OF INGREDS WHICH USERS MAY
BE EXPO ARE LISTED BY OSHA/NTP/IARC AS SUSPECT CARC.
Effects of Overexposure:PROPER INSTALLATION OF THIS PRODUCT CREATES NO
KNOWN ACUTE OR CHRONIC HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PERSONS W/PRE-EXISTING
EYE/SKIN/RESPIRATORY DISORDERS(E.G. ASTHMA CONDITIONS)MAY BE MORE
SUSCEPTIBLE TO THE EFFECTS OF VAP PRODUCED FROM OVERHEATING PROD TO
CHARRING/BURNING.

First Aid:EYE:IRRIT HOLD EYELIDS APART,FLUSH W/CLEAN H2O.GET MED
ATTN.SKIN:1STAID NORMALLY NOT REQUIRED.AFT HNDLG GOOD WORK PRAC TO
WASH HANDS.MOLTEN MATL CONTACT SKIN COOL AREA IMMED IN H2O.DONT
ATEMPT TO REMO VE MATL.TREAT AS BURN.GET MED ATTN.INGEST:IF
INGEST/SYMPTOMS DVLP GET MED ATTN.INHAL:RESP SYMPT/OTHER SYMPT DVLP
MOVE TO FRESH AIR.SYMPT PERSIST GET MED ATTN.BREATH DIFF-OXY/NOT
BREATH-ART RESP.SEE DR

Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NOT APPLICAE
Upper Limits:NOT APPLICAE
Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICAL, FOAM, DRY
POWDER.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS W/FULL FACEPIECE OPERATED IN POSITIVE DEMAND
MODE WHEN FIGHTING FIRES.
Unusual Fire/Explosion Hazard:TOXIC FUMES MAY EVOLVE IN FIRE.SEE
THERMAL DEGRADATION/COMBUSTION BYPRODUCTS.

Spill Release Procedures:SWEEP UP AND COLLECT IN SUITABLE CONTAINER FOR
DISPOSAL OR REUSE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PROD W/THERMOCHROMIC TEMP INDICATOR
DISCONT HEAT AFT COLOR CHANGE FRM RED TO COLORLESS.AVOID VAP GIVEN
OFF IF PROD HEAT TO DECOMPO-DARKEN/BROWN SLEEVE
Other Precautions:AVOID MOLTEN MATL CONTACT.HEAT-RESIST GLVOES FOR HNDL
HOT PROD AFT INSTALLATION.AVOID HEAT PROD BEYOND TEMPS REQUIRE FOR
NORMAL INSTALLATION.SEE INSTALLATION INSTRUCTS FOR PROPER
PROCEDURES.PROD CHAR/ BURN IMMED STOP HEAT-AVOID INHAL FUME.

Respiratory Protection:IF INSTALLATION OCCURS IN CONFINED UNVENTILATED
AREA, NIOSH/MSHA APPROVED RESPIRATORS ARE RECOMMENDED.
Ventilation:IAW GOOD INDUSTRIAL HYGIENE PRACTICE ENSURE ADEQUTE
VENTILATIN DURING INSTALLATION.
Protective Gloves:FOLLOW OSHA,ANSI,NIOSH GUIDELINES.
Eye Protection:FOLLOW OSHA ANSI,NIOSH GUIDELINES.
Other Protective Equipment:MOLTEN MATL-USE HEAT RESIST
GLOVES,EYE,SKIN,FACE PROTECTION.HNDL GROSSLY OVERHEAT/FIRE DMG
PROD-USE NAT RUBB GLOVES.
Work Hygienic Practices:DONT CONSUME FOOD/BEV/TOBACCO IN IMMED
WORKAREA.WASH HANDS BEF EAT/DRINK/SMOKE.
Supplemental Safety and Health
HEALTH:BURN MAY PRODUCE VAP-MAY CAUSE EYE/SKIN/NOSE/THROAT IRRIT. THERM
EYE/SKIN BURN W/MOLTEN MATL.NO HARMF FRM ABSORPTION.INGEST HI
UNLIKELY.INHAL:BYPRODS TOXIC. DECOMP/COMB:HYDROCARBONS,SIO2,HCL,HF
L,HBR,FLUORO-OLEFINS,OXIDES OF N/P/S.MAY BE TOXIC-SHOULDNT BE
INHAL.DEPEND ON SOLDER-OXIDE FUME/PARTIC OF SB/BI/PB/AG/SN

HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:6.0-11.0 G/CC
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR OR BLUE TRANSPARENT PLASTIC SLEEVES W/RING OF
SOLDER INSERT.NO ODOR.
Percent Volatiles by Volume:NA
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:AVOID OVERHEATING OF PRODUCT.
Hazardous Decomposition Products:BYPRODUCTS DEPEN ON BASAE POLYMER
USED,MAY INCLUDE NOT TLIMITED TO CO,CO2,ALDEHYDES,ACETIC ACID,LOW
MOLECULAR WT (SUPPL)

Waste Disposal Methods:IAW ALL LOC/STATE/FED REGS.IF LOC REGS COVERING
CONTROLLED INCINERATION OF HALOGENATED MATLS THEN ALL
HALOGEN-CONTAIN PRODS WILL BE SUBJ TO SUCH REGS.REFER TO PROD
LITERATURE FOR ID OF HALOGEN-CONTAIN PRODS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.