CFQYD - RTV11

  • MSDS: CFQYD
  • Manufacturer: GE SILICONES
  • Product Name: RTV11
  • National Stock Number: 8030-01-279-0970
Product Identification

Product ID:RTV11
MSDS Date:03/31/1995
FSC:8030
NIIN:01-279-0970
MSDS Number: CFQYD

Responsible Party
GE SILICONES
260 HUDSON RIVER RD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: C.E. HANNIGAN

Cage: GESIL

Contractor
GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

Ingredients

SILICA ACID, ETHYL ESTER; (ETHYL SILICATE 40).

CAS: 11099-06-2

Fraction By Weight: 1.61%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 10 PPM (MFR)


POLYDIMETHYLSILOXANE; (DIMETHYL POLYSILOXANE).

CAS: 70131-67-8

Fraction By Weight: 60-80%

OSHA PEL N/K

ACGIH TLV: N/K


1); (CALCIUM CARBONATE)

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 10-30%

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

Hazards

LD50 LC50 Mixture:SEE INGREDIENT 2.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGESTION:HARMFUL IF SWALLOWED.
SKIN CONTACT:MAY CAUSE MILD IRRITATION. INHALATION:MAY CAUSE MILD
RESPIRATORY IRRITATION. EYE CONTACT:MAY IRRITATE.
CHRONIC:RESPIRATORY AILMENTS. LIVER & KIDNEY D AMAGE. TARGET
ORGANS:RESPIRATORY SYSTEM, LIVER & KIDNEYS. OTHER:THIS PROD
CONTAINS METHYLPOLYSILOXANES (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:WHICH CAN GENERATE FORMALDEHYDE AT
APPROXIMATELY 300F (150C) & ABOVE, IN ATMOSPHERES WHICH CONTAIN
OXYGEN. FORMALDEHYDE IS A SKIN & RESP SENSITIZER, EYE & THROAT
IRRITANT, ACUTE TOXICANT & PO TENTIAL CANCER HAZARD. AN MSDS FOR
FORMALDEHYDE IS AVAILABLE FROM GE SILICONES.
Medical Cond Aggravated by Exposure:RESPIRATORY, LIVER, KIDNEY
CONDITIONS APPLY IN UNCURED STATE.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . INGEST:DO NOT INDUCE VOMIT. SLOWLY DILUTE W/1-2 GLASSES OF
WATER/MILK & SEEK MED ATTN. NEVER GIVE ANYTHING BY MOUTH TO AN UNCO
NSCIOUS PERSON. SKIN:WASH W/SOAP & WATER. EYES:IMMED FLUSH W/PLENTY
OF WATER FOR AT LST 15 MINS & GET MED ATTN IF IRRITATION PERSISTS.

Fire Fighting

Flash Point Method:COC
Flash Point:570F,299C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:SENSITIVITY TO STATIC DISCHARGE IS NOT
EXPECTED.

Accidental Release

Spill Release Procedures:WIPE, SCRAPE/SOAK UP IN AN INERT MATL & PUT IN
A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES W/DETERGENT & WATER
TO REDUCE SLIPPING HAZARD. WEAR PROPER PROT EQUIP AS SPECIFIED IN
PROT EQUIP SECTION. INCREASE AREA VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT W/SKIN & EYES. USE ONLY
IN A WELL VENTILATION AREA.
Other Precautions:CAUTION! HARMFUL IF INHALED. HARMFUL IF SWALLOWED.
MAY IRRITATE EYES. REFER TO OTHER MSDS SECTIONS FOR DETAILED
INFORMATION.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NONE KNOWN.
Ventilation:USE ONLY IN WELL VENTILATED AREA.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:T6
Boiling Pt:B.P. Text:SEE ING 1
Vapor Pres:SEE INGS
Vapor Density:SEE INGS
Spec Gravity:1.2 (H*2O=1)
VOC Pounds/Gallon:6
Evaporation Rate & Reference:>1 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE LIQUID; SLIGHT ODOR.
Percent Volatiles by Volume:2

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
FORMALDEHYDE, ETHANOL.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS. BURY IN A LICENSED LANDFILL OR BURN IN AN APPROVED
INCINERATOR ACCORDING TO FEDERAL, STATE & LOCAL REGULATIONS.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.