CFSYN - JP-10
- MSDS: CFSYN
- Manufacturer: ASHLAND CHEMICAL CO
- Product Name: JP-10
- National Stock Number: 9135-01-048-5285
Product Identification
Product ID:JP-10
MSDS Date:01/05/1996
FSC:9135
NIIN:01-048-5285
MSDS Number: CFSYN
Responsible Party
US
Emergency Phone: 800-274-5263
Info Phone: 800-325-3751
Cage: 34897
Contractor
Telephone: 614-790-3333/800-274-5263
Cage: 34897
Ingredients
4,7-METHANOINDAN, HEXAHYDRO-, EXO-; (EXO-TETRAHYDRO
CAS: 2825-82-3
RTECS: PB9600000
Fraction By Weight: 100%
OSHA PEL N/K
ACGIH TLV: N/K
DIFFICULT, ADMINISTER OXYGEN. KEEP PERSON WARM &
RTECS: 9999999ZZ
COMPLETED. STOP SPILL AT SOURCE. PREVENT FROM
RTECS: 9999999ZZ
PREVENT FROM SPREADING. IF RUNOFF OCCURS, NOTIFY
RTECS: 9999999ZZ
CNTNRS FOR RECOVERY. ABSORB UNRECOVERABLE PROD.
RTECS: 9999999ZZ
ENGINEERING OR ADMINISTRATIVE CONTROLS SHOULD BE
RTECS: 9999999ZZ
SUSPECTED OR APPARENT ADVERSE EFFECTS).
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:CAN CAUSE IRRITATION. SYMPTOMS
INCLUDE STINGING, TEARING, REDNESS AND SWELLING. SKIN:MAY CAUSE
MILD IRRITATION. PROLONGED OR REPEATED CONTACT MAY DRY SKIN.
SYMPTOMS MAY INCLUDE REDNESS, BURNING, D RYING AND CRACKING, AND
BURNS. INGESTION:SWALLOWING SMALL AMOUNTS OF THIS MATERIAL DURING
NORMAL (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:HANDLING IS NOT LIKELY TO CAUSE
HARMFUL EFTS. SWALLOWING LG AMTS MAY BE HARMFUL. INHAL:BREATHING OF
VAPOR/MIST IS POSSIBLE. SYMPTOMS OF EXPOSURE: STOMACH OR INTESTINAL
UPSET (NAUSEA, VOMITING , DIARRHEA), IRRITATION (NOSE, THROAT,
AIRWAYS).
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:IMMED MOVE INDIVIDUAL AWAY FROM EXPOS & INTO FRESH AIR.
FLUSH GENTLY W/WATER FOR AT LST 15 MINS WHILE HOLDING EYELIDS
APART; SEEK IMMED MED ATTN. SKIN:REMOVE CONTAM CLTHG. WASH EXPOS
AREA W/SOAP & WATER. IF SYMPS PERSIST, SEEK MED ATTN. LAUNDER
CLTHG BEFORE REUSE. INGEST:DO NOT INDUCE VOMIT. THIS MATL IS ASPIR
HAZ. IF INDIVIDUAL IS DROWSY/UNCON, PLACE ON LEFT SIDE W/HEAD DOWN.
SEEK (SUPDAT)
Fire Fighting
Flash Point:125F,52C
Extinguishing Media:REGULAR FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER/FOAM MAY CAUSE FROTHING WHICH CAN BE VIOLENT & POSS ENDANGER
LIFE OF FIREFIGHTER. REFER TO PPE SECTION.
Unusual Fire/Explosion Hazard:VAPS ARE HVR/AIR & MAY TRAVEL ALONG
GROUND/BE MOVED BY VENT & IGNITED BY HEAT, PILOT LIGHTS, OTHER
FLAMES & IGNIT SOURCES AT LOCATIONS DIST FROM MATL (SUPDAT)
Accidental Release
Spill Release Procedures:SM SPILL:ABSORB LIQ ON VERMICULITE, FLOOR
ABSORB/OTHER ABSORB MATL. LG SPILL:ELIM ALL IGNIT SOURCES (FLARES,
FLAMES INCL PILOT LIGHTS, ELEC SPKS). PERS NOT WEARING PROT EQUIP
SHOULD BE EXCLUDED FROM A REA OF SPILL UNTIL CLEAN-UP HAS BEEN (ING
3)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:ALL 5-GALLON PAILS & LARGER METAL
CNTNRS, INCL TANK CARS & TANK TRUCKS, SHOULD BE GROUNDED &/OR
BONDED WHEN MATERIAL IS TRANSFERRED.
Other Precautions:CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN
EMPTIED. SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES (VAPOR,
LIQUID &/OR SOLID), ALL HAZARD PRECAUTIONS GIVEN IN THIS MSDS MUST
BE OBSERVED.
Exposure Controls
Respiratory Protection:IF OVEREXP HAS BEEN DETERMINED/DOCUMENTED, A
NIOSH APPRVD AIR SUPPLIED RESP IS ADVISED IN ABSENCE OF PROPER
ENVIRON CONTROL. OSHA REGS ALSO PERMIT OTHER NIOSH APPRVD RESPS
UNDER SPECIFIED CNDTNS. (SEE YOUR SFTY EQUIP SUPPLIER). (ING 6)
Ventilation:PROVIDE SUFFICIENT MECH (GEN &/OR LOC EXHST) VENT TO
MAINTAIN EXPOS BELOW LEVEL OF OVEREXP (FROM KNOWN, (ING 7)
Protective Gloves:RESIST GLOVES(NEOPRENE, NITRILE RUBBER).
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . WEAR IMPERVIOUS CLOTHING & BOOTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:HNDLG POINT. NEVER USE WELDING/CUTTING TORCH ON/NEAR DRUM
(EVEN EMPTY) BECAUSE PROD (EVEN JUST RESIDUE) CAN IGNITE
EXPLOSIVELY. FIRST AID PROC:MED ATTN. IF POSS, DO NOT LEAVE
INDIVIDUAL UNAT TENDED. INHAL:MOVE INDIVIDUAL AWAY FROMEXPOS & INTO
FRESH AIR. IF SYMPS PERSIST, SEEK MED ATTN. IF BRTHG IS (ING 2)
Chemical Properties
Boiling Pt:B.P. Text:360F,182C
Vapor Pres:<5 @ 77F
Vapor Density:>1
Spec Gravity:0.93-0.94
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:CLEAR, SAYBOLT COLOR +25 LIQUID, HOMOGENEOUS
SOLUTION.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY FORM CARBON DIOXIDE & CARBON
MONOXIDE, VARIOUS HYDROCARBONS.
Disposal
Waste Disposal Methods:CONTAMINATED ABSORBENT MAY BE DEPOSITED IN A
LANDFILL I/A/W LOCAL, STATE & FEDERAL REGULATIONS. DESTROY BY
LIQUID INCINERATION I/A/W APPLICABLE REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.