Product ID:PEELCOTE
MSDS Date:03/09/1997
FSC:6850
NIIN:00F045634
MSDS Number: CFVDB

FIBERCOTE INDUSTRIES INC

172 E AURORA ST
WATERBURY, CT 06708-2040
US

Emergency Phone: 203-755-1344

Info Phone: 203-755-1344

Cage: 57929

FIBERCOTE INDUSTRIES INC

WATERBURY, CT 06725 US

Telephone: 203-755-1344

Cage: 57929

WOVEN NYLON FABRIC

Fraction By Weight: 40-65%

CATALYZED EPOXY MIXTURE

Fraction By Weight: 35-60%

RESIDUAL ORGANIC SOLVENTS

Fraction By Weight: <2%

ACETONE; DIMETHYL KETONE; 2-PROPANONE *97-2*

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: <1%

OSHA PEL 750 PPM

ACGIH TLV: 750 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

METHYL ETHYL KETONE, 2-BUTANONE *97-2*

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: <1%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MAY CAUSE MODERATE IRRITATION
&/DERMATITIS. INHALATION: MAY CAUSE NASAL &/RESPIRATORY IRRITATION.
INGESTION: MAY CAUSE GI IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, FATIGUE, WEAKNESS, CONFUSION,
EUPHORIA, DIZZINESS, HEADACHE, NAUSEA, VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, BRONCHIAL &
RESPIRATORY PROBLEMS.

First Aid:EYES: IMMEDIATELY FLUSH W/WATER FOR 15 MINS. SKIN: WASH
THOROUGHLY W/MILD SOAP & WATER. INGESTION: INDUCE VOMITING. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:TCC
Flash Point:-15F
Lower Limits:2.6
Upper Limits:12.8
Extinguishing Media:DRY CHEMICAL, WATER, FOG.
Fire Fighting Procedures:WEAR A SCBA & FULL PROTECTIVE EQUIPMENT.

Handling and Storage Precautions:KEEP SEALED TO AVOID ABSORPTION OF
WATER FROM HUMID AIR. KEEP AWAY FROM HEAT. STORE UNDER CONTROLLED
LOW TEMP CONDITIONS. STORE AT 0F IF POSSIBLE.
Other Precautions:AFTER LOW TEMP STORAGE, ALLOW PACKAGE TO RETURN TO
ROOM TEMP BEFORE OPENING.

Respiratory Protection:WEAR A NIOSH APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST: RECOMMENDED WHEN CURING. MECHANICAL
(GENERAL): RECOMMENDED.
Protective Gloves:RUBBER, VINYL/OTHER OSHA APPROVED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Solubility in Water:INSOLUBLE
Appearance and Odor:NATURAL COLOR PRE-IMPREGNATED FIBERGLASS CLOTH.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES & OXIDIZERS.
Stability Condition to Avoid:ELEVATED TEMPS.
Hazardous Decomposition Products:ALDEHYDES, PHENOLICS, CO, CO2, OXIDES
OF NITROGEN.
Conditions to Avoid Polymerization:UNCONTROLLED HEAT MAY CAUSE RUNAWAY
EXOTHERM.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.