Product ID:PWC POLYURETHANE AEROSOL COLORS, PWC 268, GLOSS
MSDS Date:01/01/1995
FSC:8010
NIIN:00N041597
MSDS Number: CFZKQ

PACIFIC WEST CHEMICAL CORP

CORTE MADERA, CA 94925
US

Emergency Phone: 415-924-4560

Info Phone: 415-924-4560

Cage: 58977

PACIFIC WEST CHEMICAL CORP

183 CORTE MADERA, CA 94925-0183 US

Telephone: 415-924-4560

Cage: 58977

(ORAL,RAT) 9750 MG/KG.

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 34%

OSHA PEL 1000 PPM

ACGIH TLV: 750 PPM;1000 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ACETIC ACID, BUTYL ESTER; (N-BUTYL ACETATE) (CERCLA).

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 5-15%

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM;200 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

(ORAL,RAT) 4300 MG/KG.

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 13%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM;150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

STODDARD SOLVENT; (MINERAL SPIRITS)

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: <5%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 15%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT

PROPANE, 2-METHYL-; (ISOBUTANE)

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: <5.0%

OSHA PEL 800 PPM (MFR)

ACGIH TLV: 800 PPM (MFR)

BUTANE; (NORMAL BUTANE)

CAS: 106-97-8

RTECS: EJ4200000

Fraction By Weight: 5%

OSHA PEL 800 PPM

ACGIH TLV: 800 PPM

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION:ANESTHETIC. IRRITATION OF
RESPIRATORY TRACT OR NERVOUS SYSTEM, DEPRESSION-CHARACTERIZED BY
HEADACHE, DIZZINESS, NAUSEA OR POSSIBLE UNCONSCIOUSNESS. SKIN
CONTACT:PRIMARY IRRITATION. MAY CAUS E IRRITATION OR BURNING.
PROLONGED OR REPEATED CONTACT MAY CAUSE DERMATITIS-EXERCISE DUE
CARE. EYE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CONTACT:PRIMARY IRRITATION. SKIN
ABSORPTION:MAY CAUSE IRRITATION OR BURNING SENSATION. INGESTION:NOT
APPLICABLE.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE FROM EXPOSURE &
RESTORE BREATHING, SEEK MEDICAL ATTENTION. SKIN:WASH AFFECTED AREA.
REMOVE CONTAMINATED CLOTHING. SEE MD IF ANY IRRITATION PERSISTS.
EYE S:FLUSH IMMEDIATELY W/WATER FOR AT LEAST 15 MINUTES & TAKE TO
MD.

Flash Point Method:TCC
Flash Point:-15F,-26C
Lower Limits:0.7%
Upper Limits:12.8%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFT, BUT WATER SPRAY MAY BE USED TO COOL
CNTNRS EXPOS TO HEAT/FIRE TO PVNT PRESS BUILD UP.
Unusual Fire/Explosion Hazard:CLSD CNTNRS MAY EXPLODE DUE TO BUILD UP
OF PRESS FROM EXTREME HEAT/FIRE. AEROSOL SPRAY IS EXTREMELY FLAMM.
SENSITIVITY TO IMPACT:DO NOT PUNCTURE. (SUPP DATA)

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION; SPARKS,
FLAMES, STATIC ELECTRICITY & ELECTRICAL. VENTILATE AREA & SOAK UP
W/INERT ABSORBENT USING NON-SPARKING TYPE TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. DO NOT STORE
OR USE NEAR HEAT, SPARKS OR FLAME. DO NOT GET IN EYES. DO NOT
BREATHE VAPORS. AVOID SKIN CONTACT.
Other Precautions:DO NOT TAKE INTERNALLY. SMOKING WHILE USING THIS
PRODUCT MUST BE STRICTLY PROHIBITED. IN ADDITION TO ALL OTHER
HAZARDS & PRECAUTIONS - DUST FROM SANDING DRY PAINT FILMS SHOULD BE
TREATED AS A NUISANCE DUST W/TLV OF 10 MG/M3.

Respiratory Protection:OUTDOORS:MFR RECOMMENDS A NIOSH APPROVED
PARTICULATE FILTER TO REMOVE ANY AIRBORNE OVERSPRAY. IN RESTRICTED
AREAS W/POOR VENTILATION & CLOSE TO TLV, A NIOSH APPROVED
RESPIRATOR W/ORGANIC VAPOR CARTRID GE IS RECOMMENDED.
Ventilation:ALL APPLICATION AREAS SHOULD BE ADEQUATELY VENTILATED IN
ORDER TO KEEP INGREDIENTS BELOW THEIR EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . IMPERVIOUS APRON TO PREVENT SKIN CONT IS
REC.
Work Hygienic Practices:AVOID PROLONGED OR REPEATED CONTACT. WASH
CONTAMINATED CLOTHING PRIOR TO RE-USE.
Supplemental Safety and Health
EXPLO HAZ:SENSITIVITY TO STATIC DISCHARGE:PRIMARILY VAPORS.

Boiling Pt:B.P. Text:-10F,-23C
Vapor Density:HVR/AIR
Spec Gravity:0.7 (H*2O=1)
VOC Pounds/Gallon:607
VOC Grams/Liter:5.07
Evaporation Rate & Reference:FASTER THAN N-BUAC
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE LIQUID; SOLVENT BASED ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:CO, CO*2, HCL & POSSIBLY TRACES OF
PHOSGENE.

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.