CFZNP - AIBEMET
- MSDS: CFZNP
- Manufacturer: BRUSH WELLMAN INC
- Product Name: AIBEMET
- National Stock Number: 9650-00N080818
Product Identification
Product ID:AIBEMET
MSDS Date:10/01/1996
FSC:9650
NIIN:00N080818
MSDS Number: CFZNP
Responsible Party
ELMORE, OH 43416-9502
US
Emergency Phone: 800-862-4118;800-424-9300(CHEMTREC)
Info Phone: 800-862-4118
Cage: 4B151
Contractor
Telephone: 800-862-4118; -4177 (FAX)
Cage: 4B151
Ingredients
BERYLLIUM (SARA 313) (CERCLA)
CAS: 7440-41-7
RTECS: DS1750000
OSHA PEL 0.002 MG/M3, Z-2
ACGIH TLV: .002 MG/M3, A2; 9495
ALUMINUM; (ALUMINUM DUST) (SARA 313)
CAS: 7429-90-5
RTECS: BD0330000
OSHA PEL 15 MG/M3 DUST
ACGIH TLV: 10 MG/M3 DUST; 9495
ALUMINUM; (ALUMINUM FUMES AND RESP DUST) (SARA 313)
CAS: 7429-90-5
RTECS: BD0330000
OSHA PEL 15 MG/M3 DUST
ACGIH TLV: 10 MG/M3 DUST; 9495
OF INGOTS IS DESIRABLE PRIOR TO MELTING. MOLTEN
RTECS: 9999999ZZ
IN SUSPENSION CAN RSLT IN THE CONC BUILDING
RTECS: 9999999ZZ
DURING USE. THE COOLANT RESERVOIR SHOULD BE ENCLSD &
RTECS: 9999999ZZ
EXPOS ALSO MAY OCCUR DURING REPAIR/MAINTENANCE
RTECS: 9999999ZZ
MAINTENANCE/REPAIR OF AIR CLEANING EQUIP, STRUCTURAL
RTECS: 9999999ZZ
CASES OF ILLNESS RSLG FROM INGEST OF THIS MATL.
RTECS: 9999999ZZ
W/METAL DUST, FUME/POWDER DURING HAND TO MOUTH
RTECS: 9999999ZZ
ETC. THESE PRODS ARE NOT INTENDED FOR INTERNAL
RTECS: 9999999ZZ
THIS PROD IS IN
RTECS: 9999999ZZ
ALLERGIC DERMAL RESPONSE/SKIN ABSORPTION. SKIN
RTECS: 9999999ZZ
PARTICULATE IRRIT/MECH INJURY TO THE EYES BY
RTECS: 9999999ZZ
W/AIRBORNE PARTICULATE (CHIPS, DUST/POWDER)/CNTCT TO
RTECS: 9999999ZZ
IS INSOL & DOES NOT CAUSE ACUTE HLTH EFTS. CHRONIC
RTECS: 9999999ZZ
SERIOUS, CHRONIC LUNG DISEASE CALLED CHRONIC
RTECS: 9999999ZZ
LUNG DISEASE CAN BE FATAL. SYMPS MAY INCL COUGH,
RTECS: 9999999ZZ
FATIGUE. LONG-TERM EFTS MAY INCL LOSS OF LUNG
RTECS: 9999999ZZ
HEART W/EVENTUAL PERM IMPAIRMENT. CHRONIC BERYLLIUM
RTECS: 9999999ZZ
IN WHICH THE TISS OF THE LUNGS BECOME INFLAMED
RTECS: 9999999ZZ
W/ACCOMPANYING FIBROSIS, MAY RESTRICT THE EXCHANGE
RTECS: 9999999ZZ
ALLERGIC RESPONSE TO BERYLLIUM IS LIMITED TO
RTECS: 9999999ZZ
IS RELATED TO GENETIC FACTORS. EXPOS TO AIRBORNE
RTECS: 9999999ZZ
LUNG FIBROSIS.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:AN EXPOS TO AIRBORNE BERYLLIUM
IN EXCESS OF THE OCCUP STD CAN OCCUR WHEN MACHINING, MELTING,
CASTING, DROSS HNDLG, PICKING, ABRASIVE CUTTING, WELDING, GRINDING,
SANDING, POLISHING, MILLING, CRUS HING/OTHERWISE ABRADING THE SURF
OF THIS MATL IN A MANNER WHICH GENERATES FINELY DIVIDED PARTICLES
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:BERYLLIUM:IARC MONO, SUPPLIMENT, VOL 58,
PG 41, 1993:GROUP 1. NTP 7TH ANNUAL RPT ON CARCIN, 1994:ANTICIPATED
(ING 25)
Effects of Overexposure:HLTH HAZ:MACHINING OPERATIONS CONDUCTED UNDER A
FLOOD OF LIQ COOLANT USUALLY REQUIRE COMPLETE HOODED CONTAINMENT &
LOCAL EXHAUST VENT. OPENINGS INTO THE HOOD MUST BE BAFFLED TO
PREVENT RELEASE OF FAST MOVING PARTICLES. THE CYCLING THROUGH
MACHINE OF LIQ LUBRICANT/COOLANT CONTAINING FINELY DIVIDED
BERYLLIUM (ING 5)
Medical Cond Aggravated by Exposure:PERS W/IMPAIRED PULM FUNCTION,
AIRWAY DISEASES/CNDTNS SHUCH AS ASTHMA, EMPHYSEMA, CHRONIC
BRONCHITIS, ETC. FOR MORE SPECIFIC INFORMATION CONTACT NEHC .
First Aid
First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES: IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
MD . SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . CONTACT NEHC
FOR MORE SPECIFIC INFORMATION .
Fire Fighting
Flash Point:N/A TO SOLIDS
Extinguishing Media:ONLY IN POWDER/OTHER FINELY DIVIDED FORM DOES
BERYLLIUM & ALUMINUM PRESENT A SPECIAL FIRE PROBLEM. TO EXTING A
(SUPDAT)
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:INGOTS/SOLIDS MAY CNTN SHRINKAGE CAVITIES
WHICH PERMIT ENTRAPMENT OF H*2O. TO ELIM MOISTURE PRIOR TO USE IN
ANY METAL OPERATION & TO SAFEGUARD (SUPDAT)
Accidental Release
Spill Release Procedures:IN SOLID FORM, THIS MATL POSES NO SPECIAL
HLTH/ENVIRON RISK. IF THIS MATL IS IN POWDER/DUST FORM, ESTABLISH A
RESTICTED ENTRY ZONE BASED ON THE SEVERITY OF THE SPILL. FOR MORE
SPECIFIC INFORMATION CON TACT NEHC .
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:WHERE GLOVES WHEN HANDLING PARTS WITH
SHARP EDGES. STORE IN A DRY AREA. VACUUM & WET CLEANING METHODS,
ARE RECOMMENDED FOR DUST REMOVAL.
Other Precautions:BE CERTAIN TO DE-ENERGIZE ELECTRICAL SYSTEMS, AS
NECESSARY, BEFORE BEGINNING WET CLEANING. VACUUM CLEANERS W/HIGH
EFFECTIVE PARTICULATE AIR (HEPA) FITERS ARE RECOMMENDED. CONTACT
NEHC FOR MORE SPECIFI C INFORMATION .
Exposure Controls
Respiratory Protection:WHEN POTENTIAL EXPOS ARE ABOVE THE OCCUP LIMITS
SHOWN IN SECTION 2, NIOSH APPRVD RESPS MUST BE USED AS SPECIFIED BY
AN INDUSTRIAL HYGIENIST/OTHER QUALIFIED PROFESSIONAL. FOR MORE
SPECIFIC INFORMATION CONTACT NEHC .
Ventilation:WHENEVER POSS, THE USE OF LOC EXHST. FOR MORE SPECIFIC
INFORMATION CONTACT NEHC .
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . FOR MORE SPECIFIC INFO CONTACT NEHC .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA:METAL POWDER FIRE, USE CLASS D FIRE EXTINGUISHING POWDER.
DO NOT USE H*2O TO EXTINGUISH FIRES AROUND OPERATIONS INVOLVING
MOLTEN METAL DUE TO THE POTENTIAL FOR STEAM EXPLOSIONS. EXPLO HAZ
:AGAINST POSS STEAM EXPLOSION HAZ, INGOTS SHOULD BE THOROUGHLY DRY
BEFORE CHARGING INTO A FURNACE. PREHEATING (ING 4)
Chemical Properties
Solubility in Water:NONE
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS & CAUSTIC SOLN. CONTACT NEHC FOR MORE SPECIFIC INFORMATION.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE UNDER NORMAL CONDITIONS OF USE.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS . FOR MORE SPECIFIC INFORMATION CONTACT
NEHC .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.