Product ID:AMBERLITE IRA 900 CL RESIN, 63228
MSDS Date:07/24/1991
FSC:6810
NIIN:01-014-1028
MSDS Number: CGDTF

ROHM AND HAAS CO

100 INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19106-2399
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 215-592-3000

Cage: 77902

ROHM AND HAAS CO

PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

BENZENEMETHANAMINIUM AR-ETHENYL-N,N,N-TRIMETHYLCHLORIDE

CAS: 60177-39-1

Fraction By Weight: 40-55%

OSHA PEL N/K

ACGIH TLV: N/K

DIVINYLBENZENE OR STYRENE COPOLYMER, CL ION FORM

RTECS: 9999999ZZ

32.0F, 0.0C. %

CAS: 7732-18-5

RTECS: ZC0110000

OSHA PEL N/K

ACGIH TLV: N/K

THIS EXPANSION CAN CAUSE GLASS COLUMNS TO SHATTER.

RTECS: 9999999ZZ

MANUAL OF REC PRACTICE PUBLISHED BY AMERICAN

RTECS: 9999999ZZ

INSTALLATION, USE, AND MAINTENANCE OF EXHAUST

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: CAN CAUSE IRRITATION.
CHRONIC: NONE LISTED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGESTION: CALL MD IMMEDIATELY . INHALATION: REMOVE TO FRESH
AIR. SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION) . SKIN:
FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL MD . EYES: FLU SH WITH
LARGE AMOUNT OF WATER FOR AT LEAST 15 MINUTES. CONSULT A PHYSICIAN
IF IRRITATION PERSISTS.

Flash Point:N/NA
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTION GENERATES TOXIC FUMES OF THE
FOLLOWING: NITROGEN OXIDES, HYDROGEN CHLORIDE.

Spill Release Procedures:PERSONAL PROT:WEAR GLOVES MADE OF
COTTON/CANVAS. ADDNL PERSONAL PROT EQUIP SHOULD INCLUDE SAFETY
GLASSES (ANSI Z87.1 OR APPRVD EQUIVALENT). FLOOR MAY BE SLIPPERY;
USE CARE TO AVOID FALLING. TRANSFER S PILLED MATL TO SUITABLE
CNTNRS FOR RECOVERY/DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MINIMUM RECOMMENDED STORAGE TEMP FOR
MATERIAL IS 0C/32F. MAX REC STORAGE TEMP FOR MATL IS 60C/140F.
AVOID RPTD FREEZE-THAW CYCLES; BEADS MAY FRACTURE.
Other Precautions:MAX REC OPERATING TEMP FOR THIS MATL IS 77C/170F.
PROPERLY DESIGNED EQUIP IS VITAL IF THESE ION EXCHANGE RESINS ARE
TO BE USED IN CONJUNCTION W/STRONG OXIDIZING AGENTS SUCH AS NITRIC
ACID TO PVNT RAPI D BUILD-UP OF PRESS & POSSIBLE (SUPDAT)

Respiratory Protection:NIOSH APPRVD RESP APPROP FOR EXPOSURE OF CONCERN
. RESP PROT PROGRAM MEETING OSHA 1910.134 & ANSI Z88.2 REQUIREMENTS
MUST BE FOLLOWED WHENEVER WORKPLACE CNDTNS WARRANT NIOSH APPRVD
RESP'S USE. N ONE REQD UNDER NORM OPERATING CNDTNS.
Ventilation:VENT SYS EMPLOYED IS DEPENDENT ON USER'S SPECIFIC APPLIC OF
MATL. REFER TO CURRENT EDITION OF INDUS VENT:A (ING 5)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV: 1.0-1.4 (WATER =!). PH:7-9 AQUEOUS SLURRY. CNDTNS TO AVOID:
INFO SECTION FOR SPECIFIED CNDTNS. HOWEVER, AVOID TEMPS >200C/392F.
OTHER PREC: EXPLOSION. CONSULT SOURCE KNOWLEDGEABLE IN HANDLI NG OF
THESE MATLS BEFORE PROCEEDING. DONOT PACK COLUMN W/DRY ION EXCHANGE
RESINS. DRY BEADS EXPAND WHEN WETTED; (ING 4)

Boiling Pt:B.P. Text:SEE ING 3
Melt/Freeze Pt:M.P/F.P Text:SEE ING 3
Vapor Pres:SEE ING 3
Vapor Density:<1
Spec Gravity:SUPDAT
pH:SUPDAT
Evaporation Rate & Reference:<1 (BAC = 1)
Appearance and Odor:BEADS.
Percent Volatiles by Volume:ING 3

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS, PARTICULARLY CONCENTRATED
NITRIC ACID.
Stability Condition to Avoid:THIS MATL IS CONSIDERED STABLE UNDER
SPECIFIED CONDITIONS OF STOR, SHIPMENT AND/OR USE. SEE STORAGE &
HANDLING (SUPDAT)
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD THE
FOLLOWING: MONOMER VAPORS, OXIDES OF NITROGEN, ALKYLAMINES,
HYDROGEN CHLORIDE.

Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED/LANDFILLED IN
FACILITIES MEETING LOCAL, STATE, AND FEDERAL REGULATIONS. FOR
CONTAMINATED RESIN, USER MUST DETERMINE THE HAZARD AND USE AN
APPROPRIATE DISPOSAL METHOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.