CGJCP - PROPANE
- MSDS: CGJCP
- Manufacturer: DIAMOND SHAMROCK REFINING AND MARKETING CO
- Product Name: PROPANE
- National Stock Number: 6830-00F055171
Product Identification
Product ID:PROPANE
MSDS Date:10/25/1996
FSC:6830
NIIN:00F055171
MSDS Number: CGJCP
Responsible Party
SAN ANTONIO, TX 78269-6000
US
Emergency Phone: 210-641-8601
Info Phone: 210-641-8601
Cage: 3P045
Contractor
Telephone: 210-641-8601
Cage: 3P045
Ingredients
PROPANE (DIMETHYLMETHANE) *97-4*
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 90-95%
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
ETHANE
CAS: 74-84-0
RTECS: KH3800000
Fraction By Weight: <5%
ACGIH TLV: SIMPLE ASPHYXIANT
PROPYLENE
CAS: 115-07-1
RTECS: UC6740000
Fraction By Weight: <1.5%
ACGIH TLV: SIMPLE ASPHYXIANT
ISOBUTANE, 2-METHYLPROPANE
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: <10%
OSHA PEL 1800 MG/CUM
ACGIH TLV: 1000 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CAN CAUSE CNS DEPRESSION &
POSSIBLE ASPHYXIATION, MAY IRRITATE THE RESPIRATORY TRACT. SKIN:
CAN CAUSE COLD BURNS/FROST BITE. EYES: CAN PRODUCE COLD BURNS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:LOSS OF CONSCIOUSNESS, IRRITATION, COLD BURNS.
First Aid
First Aid:SKIN: THAW FROZEN CLOTHING BEFORE REMOVAL. DON'T RUB FROZEN
AREAS. COVER THE WOUNDS W/STERILE DRESSING ONLY. INHALATION: REMOVE
TO FRESH AIR. IF BREATHING HAS STOPPED, RESUSITATE & GIVE OXYGEN IF
AVAI LABLE. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:-156F
Lower Limits:2.1
Upper Limits:9.5
Extinguishing Media:DRY CHEMICAL, CO2.
Fire Fighting Procedures:USE SCBA IN CONFINED AREAS. WATER SPRAY SHOULD
BE USED TO COOL CONTAINERS & HELP DISPERSE VAPORS. SHUT OFF GAS
SUPPLY. STOP LEAK BEFORE EXTINGUISHING.
Unusual Fire/Explosion Hazard:VAPOR IS > THAN AIR & MAY TRAVEL SOME
DISTANCE TO SOURCE OF IGNITION & FLASH BACK. VAPOR MAY EXPLODE IF
IGNITED IN AN ENCLOSED AREA. AUTOIGNITION TEMP: -850F.
Accidental Release
Spill Release Procedures:STOP LEAK BEFORE ATTEMPTING TO EXTINGUISH. IF
A LEAK HASN'T IGNITED, WATER SPRAY MAY BE USED TO DISPERSE &
PROTECT PERSONS TRYING TO STOP A LEAK. TRANSFER TO & FROM GROUNDED
CONTAINERS. STEPS SHOULD B E TAKEN TO CONTAIN/CONTROL/STOP LOSS
OFVOLATILE.
Handling
Handling and Storage Precautions:PROTECT AGAINST PHYSICAL DAMAGE. STORE
IN COOL, WELL VENTILATED AREA OF NON-COMBUSTIBLE CONSTRUCTION AWAY
FROM POSSIBLE SOURCE OF IGNITION.
Other Precautions:SEPARATE FROM OXIDIZING MATERIALS.
Exposure Controls
Respiratory Protection:WHERE ENGINEERING CONTROLS AREN'T FEASIBLE, USE
POSITIVE PRESSURE SUPPLIED AIR RESPIRATORY PROTECTION.
Ventilation:USE ENGINEERING CONTROLS TO MINIMIZE RELEASE.
Protective Gloves:INSULATED
Eye Protection:FACE SHIELD(8-INCH MINIMUM)/GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING, STANDARD WORK CLOTHING.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:-43.6F
Melt/Freeze Pt:M.P/F.P Text:-305F
Vapor Pres:200-215
Vapor Density:1.6
Spec Gravity:0.5-0.51
Solubility in Water:TRACE
Appearance and Odor:COLORLESS GAS W/ODOR NOT DETECTABLE BELOW -500 PPM;
NO ODORANT ADDED
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:SOURCES OF IGNITION, FLAMES, HOT SURFACES,
ELECTRICAL/FRICTIONAL SPARKS.
Hazardous Decomposition Products:CO, CO2.
Conditions to Avoid Polymerization:UNDER HIGH TEMP & HIGH PRESSURE,
IT'S POLYMERIZED TO POLYPROPYLENE.
Disposal
Waste Disposal Methods:SHIPMENT/STORAGE/DISPOSAL OF WASTE MATERIALS ARE
REGULATED IAW/FEDERAL, STATE & LOCAL REGULATIONS. FLAMMABLE GAS
UN1075. WASTE PRODUCT & CONTAMINATED MATERIAL WILL BE CONSIDERED A
HAZARDOUS WASTE IF F LASH POINT IS <140F.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.