CGNXW - CERAMCO FINE GRAIN STAINS, 490183

  • MSDS: CGNXW
  • Manufacturer: CERAMCO INC
  • Product Name: CERAMCO FINE GRAIN STAINS, 490183
  • National Stock Number: 6520-00N082672
Product Identification

Product ID:CERAMCO FINE GRAIN STAINS, 490183
MSDS Date:01/03/1994
FSC:6520
NIIN:00N082672
MSDS Number: CGNXW

Responsible Party
CERAMCO INC
SIX TERRI LANE SUITE 100
BURLINGTON, NJ 08016
US

Emergency Phone: 609-386-8900

Info Phone: 609-386-8900

Cage: 0JEB0

Contractor
CERAMCO INC.
BURLINGTON, NJ 08016 US

Telephone: 609-386-8900

Cage: 0JEB0

Ingredients

SILICATE GLASS; (SODA LIME SILICATE GLASS)

Fraction By Weight: 99%

OSHA PEL N/K

ACGIH TLV: 10 MG/M3 (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION UPON
CONTACT. SKIN: NONE: INHALATION: AVOID BREATHING GROUND PORCELAIN
POWDER REGULARLY. HOWEVER, SHORT TERM OR ACUTE EXPOSURE TO
PORCELAIN POWDER OR DUST IS NOT CONSIDERED A SIGNIFICANT HEALTH
HAZARD. INGESTION:NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARD.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: IMMEDIATELY FLUSH EYES WITH COPIOUS QUANTITIES OF WATER
FOR AT LEAST 15 MINUTES; SEEK MEDICAL ATTENITON IF IRRITATION OR
DISCOMFORT PERSISTS. SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER.
CALL MD ( ). INHAL: REMOVE TO FRESH AIR. INGEST: CALL MD
IMMEDIATELY .

Fire Fighting

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:SWEEP OR SCOOP UP AND STORE IN APPROPRIATE
CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE.
Other Precautions:ECOLOGICAL INFORMATION: STABLE, INORGANIC COMPOUND,
DOES NOT DEGRADE OR EVAPORATE.

Exposure Controls

Respiratory Protection:WEAR NIOSH APPROVED MASK FOR NUISANCE DUST.
Ventilation:GENERAL MECHANICAL EXHAUST. LOCALIZED VENTILATION
RECOMMENDED FOR GRINDING OPERATIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:OBSERVE NORMAL CARE WHEN WORKING WITH FINE
POWDERS.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Spec Gravity:2.11-4.8 G/CC
Solubility in Water:INSOLUBLE
Appearance and Odor:FINELY DIVIDED POWDER. VARIOUS COLORS.

Stability

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:ND.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS FOR RELATIVELY NON-TOXIC INORGANICS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.