CGPJT - GLOSS BLACK, B21B00300
- MSDS: CGPJT
- Manufacturer: KRYLON HARDWARE
- Product Name: GLOSS BLACK, B21B00300
- National Stock Number: 8010-00N082994
Product Identification
Product ID:GLOSS BLACK, B21B00300
MSDS Date:05/19/1997
FSC:8010
NIIN:00N082994
MSDS Number: CGPJT
Responsible Party
SOLON, OH 44139
US
Emergency Phone: 216-566-2917
Info Phone: 800-832-2541
Cage: JO346
Contractor
Telephone: 216-292-7400 OR 216-595-8634
Cage: 09800
Ingredients
ETHANOL, 2-(2-METHOXYETHOXY)-;
CAS: 111-77-3
RTECS: KL6125000
Fraction By Weight: 4%
OSHA PEL N/K
ACGIH TLV: N/K
OXO-ALCOHOL ACETIC ACID ESTER; (OXO-TRIDECYL ACETATE). VP
CAS: 108419-35-8
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: N/K
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 1 - 4%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9495
1.87 LB 224 GM.
RTECS: 9999999VO
MAY BE PRESENT AT HAZ LEVELS ONLY DURING
RTECS: 9999999ZZ
ARE LISTED IN INGRED SECTION, THE APPLICABLE LIMITS
RTECS: 9999999ZZ
DUST), 3 MG/M3 (RESPIRABLE FRACTION), OSHA PEL 15
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EXPOS MAY BE BY INHAL AND/OR SKIN/EYE
CNTCT, DEPENDING ON CNDTNS OF USE. TO MINIMIZE EXPOS, FOLLOW
RECOMMENDATIONS FOR PROPER USE, VENT, & PERS PROT EQUIP. IRRIT OF
EYES, SKIN & UPPER RESP SYS. IN A C ONFINED AREA VAPS IN HIGH CONC
MAY CAUSE HDCH, NAUS/DIZZ. SIGNS & SYMPS OF OVEREXP:REDNESS & (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:CARBON BLACK: IARC MONOGRAPHS, VOL 65,
PG 24-27, 1995: GROUP 2B.
Effects of Overexposure:HLTH HAZ:ITCHING/BURNING SENSATION MAY INDICATE
EYE OR EXCESSING SKIN EXPOSURE.
Medical Cond Aggravated by Exposure:NONE GENERALLY RECOGNIZED.
First Aid
First Aid:INHALED: IF AFFECTED, REMOVE FROM EXPOSURE. RESTORE
BREATHING. KEEP WARM AND QUIET. SKIN: WASH AFFECTED AREA THOROUGHLY
WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND LAUNDER
BEFORE RE-USE. EYE S: FLUSH EYES WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. GET MEDICAL ATTENTION. INGEST: GET MEDICAL
ATTENTION.
Fire Fighting
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL FOAM.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFT. IF H*2O IS USED, FOG NOZZLES ARE PREF.
H*2O MAY BE USED TO COOL CLSD (SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (DUE TO THE
BUILD-UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
TRANSFER ONLY TO APPROVED CONTAINERS WITH COMPLETE AND APPROPRIATE
LABELING. DO NOT TAKE INTERNALLLY.
Other Precautions:KEEP OUT OF THE REACH OF CHILDREN. USE ONLY
W/ADEQUATE VENT. AVOID BRTHG VAP & SPRAY MIST. AVOID CNTCT W/SKIN &
EYES. THIS COATING MAY CONTAIN MATLS CLASSIFIED AS NUISANCE
PARTICULATES (LISTED "AS DUS T" IN INGRED SECTION) WHICH (ING 5)
Exposure Controls
Respiratory Protection:IF PERS EXPOS CANNOT BE CONTROLLED BELOW APPLIC
LIMS BY VENT, WEAR A PROPERLY FITTED ORG VAP/PARTICULATE RESP
PROVIDED BY NIOSH FOR PROT AGAINST MATLS IN SECTION 2. WHEN
SANDING/ABRADING THE DRIED FIL M WEAR A DUST/MIST RESP (SUPDAT)
Ventilation:LOC EXHST PREF. GEN EXHST ACCEPTABLE IF EXPOS TO MATLS IN
SECTION 2 IS MAINTAINED BELOW APPLIC EXPOS LIM. (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS AFTER USING.
Supplemental Safety and Health
FIRE FIGHT PROC:CONTAINERS TO PREVENT PRESSURE BUILD-UP AND POSSIBLE
AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT. RESP
PROT:APPROVED BY NIOSH FOR DUST WHICH MAY BE GENERATED FROM THIS
PRODU CT, UNDERLYING PAINT, OR THE ABRASIVE. VENT:REFER TO OSHA
STANDARDS 1910.94, 1910.107, 1910.108.
Chemical Properties
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.02
pH:9.0
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:75
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:BY FIRE: CARBON DIOXIDE, CARBON
MONOXIDE.
Disposal
Waste Disposal Methods:WASTE FROM THIS PRODUCT IS NOT HAZ AS DEFINED
UNDER THE RCRA 40 CFR 261. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINER. DISPOSE OF IN ACCORDANCE WITH FEDERAL,
STATE, AND LOCAL RE GULATIONS REGARDING POLLUTION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.